Harvest Right Medium Pharmaceutical Replacement Trays 7-Pack | OEM Fit

Quick Spec: SKU: HR-TRAYS-MD-PH  |  Tray Count: 6  |  Chamber Capacity: 1.5 GAL / 5.7L  |  Material: Stainless Steel  |  MAP: $129

Precision Control in Any Space

Every batch that exits your chamber carrying inconsistent moisture content is a batch that cannot be reliably labeled, stored, or sold at full value. The enemy is not the process — it is the equipment that introduces variability before the cycle even begins. Trays that do not seat flush against shelf surfaces create uneven thermal contact. Surfaces that are not pharmaceutical-grade introduce contamination vectors that compromise shelf stability. Loading configurations that vary run-to-run mean your sublimation front advances at different rates across the same chamber, and the result is a finished product that cannot be reproduced with confidence. That variance is not visible until it shows up in potency testing, in customer returns, or in a batch that simply will not seal correctly because the residual moisture is outside specification. The cost is silent, cumulative, and entirely preventable.

After deployment, the medium pharmaceutical freeze dryer chamber operates as a controlled, repeatable environment. Six trays load to a uniform geometry, each presenting the same surface area to the shelf, the same thermal contact profile, and the same sublimation pathway. Batch-to-batch output becomes predictable. Operators stop troubleshooting tray-related variance and start running production cycles with the confidence that the physical loading configuration is not the variable introducing error. Shelf stability improves because moisture removal is consistent. Terpene retention is protected because the sublimation front advances uniformly across the entire load rather than racing ahead in one tray while lagging in another. The chamber becomes an asset that produces the same result every time it is loaded correctly.

The mechanism is straightforward: pharmaceutical-grade stainless steel construction ensures that every tray in the set presents an identical, non-reactive surface to the product load. The 6-tray configuration is matched to the medium freeze dryer's 5.7L (1.5 GAL) holding capacity, meaning the tray set fills the chamber to its designed operating geometry — no partial loads, no improvised spacing, no thermal dead zones created by missing trays. Stainless steel construction eliminates the surface degradation and off-gassing risk associated with non-pharmaceutical-grade tray materials, supporting batch processing integrity across extended production runs. The set of 7 provides one operational spare, ensuring that a single tray requiring inspection or cleaning does not halt a production cycle. In practical terms, the Harvest Right Pharmaceutical Trays Medium Set of 7 delivers a 6-tray, 5.7L pharmaceutical-grade loading configuration matched to the medium freeze dryer chamber at a MAP of $129.

Where This Belongs (and Doesn't)

This tray set is designed for use exclusively with the Harvest Right Medium Pharmaceutical Freeze Dryer. Verify chamber compatibility before ordering. Do not use in non-pharmaceutical-grade chambers where tray geometry and shelf contact specifications differ from the medium unit configuration.

How It Works

Lyophilization depends on three physical conditions being met simultaneously: the product must be frozen solid, the chamber must be evacuated to a pressure below the triple point of water, and the shelf must deliver controlled thermal energy to drive sublimation — the direct phase transition from ice to vapor without passing through liquid. Any disruption to the uniformity of product contact with the shelf surface interrupts this process. A tray that does not seat flat creates an air gap between the product load and the shelf, reducing thermal conductivity at that point and slowing sublimation in that zone. The result is a moisture gradient across the batch: some product is fully dried while adjacent product retains residual moisture above specification.

The pharmaceutical-grade stainless steel construction of this tray set addresses that failure mode directly. Stainless steel maintains dimensional stability across the full temperature range of the freeze drying cycle — from initial freeze-down through primary drying and secondary drying phases — ensuring that tray geometry does not change as the chamber cycles. The 6-tray configuration is matched to the medium chamber's designed shelf layout, so every tray occupies a shelf position for which it was dimensionally specified. The inclusion of a seventh tray in the set is an operational decision: it provides a clean, inspected spare that can be rotated into service immediately if a tray requires removal for cleaning or inspection, eliminating the cycle interruption that a 6-tray-only set would impose. In practical terms, the Harvest Right Pharmaceutical Trays Medium Set of 7 delivers pharmaceutical-grade stainless steel tray geometry across a 6-active-tray, 5.7L chamber configuration with one operational spare included per set.

System Integration

• Compatible Freeze Dryer: Harvest Right Medium Pharmaceutical Freeze Dryer (1.5 GAL / 5.7L, 6-tray chamber configuration). Do not use with small or large chamber units.
• Vacuum Pump Pairing: Medium freeze dryer operates with the Premier Vacuum Pump (standard) or XL Premier Vacuum Pump. Oil-free vacuum pump upgrade ($1,495) is compatible with all chamber sizes including medium.
• Post-Cycle Sealing: Impulse sealer and Mylar bags (50 ct.) are available as companion accessories for batch packaging immediately following lyophilization cycle completion.
• Smart Freeze Technology: Medium freeze dryer platform supports app connectivity, Wi-Fi control, Candy Mode, and patented Smart Freeze software — tray set compatibility is not affected by control system configuration.
• Maintenance Accessories: Vacuum pump oil and oil filter are available for operators running the standard Premier Vacuum Pump. Oil-free pump upgrade eliminates oil change requirements entirely.

Operator Field Notes

• Load uniformly across all 6 active trays. Partial loading — running fewer than 6 trays in a 6-tray chamber — alters the thermal load distribution and can extend cycle time or produce uneven drying results. If batch volume does not fill all trays, distribute product evenly across all 6 rather than concentrating it in fewer trays.
• Rotate the spare tray on a scheduled basis. The seventh tray is not a backup for emergencies only — it is a production tool. Rotating it into the active set on a regular cleaning schedule keeps all 7 trays in equivalent condition and prevents one tray from accumulating more cycle hours than the others.
• Inspect tray seating before every cycle. Stainless steel trays maintain dimensional stability, but shelf contact should be verified visually before the chamber door is sealed. A tray that is not fully seated on the shelf will not achieve designed thermal contact, and the resulting moisture gradient will not be visible until post-cycle testing.
• Clean with non-abrasive, food-safe solvents only. Pharmaceutical-grade stainless steel surfaces should not be cleaned with abrasive pads or chlorine-based cleaners that can compromise surface integrity over time. Verify cleaning protocol compatibility with your facility's SOPs before first use.
• Document tray condition per batch. In licensed production environments, tray condition is a traceable variable. Maintaining a simple log of tray rotation, cleaning dates, and any observed surface changes supports batch documentation and simplifies compliance review.
• Pair with the oil-free vacuum pump upgrade for maintenance-free operation. The oil-free pump ($1,495) eliminates oil change requirements and reduces scheduled maintenance intervals, which is operationally significant in continuous production environments where downtime for pump maintenance competes with cycle scheduling.

Operator FAQ

Shipping & Logistics

• Shipping Territory: Contiguous 48 United States only. Alaska, Hawaii, U.S. territories, and international destinations are not served through this storefront.
• Lead Time: Lead time and carrier information are not specified in source data for this SKU. Contact Cannafull Spectrum Solutions at cannafullspec.com for current fulfillment timelines before placing a time-sensitive order.
• Returns: Returns are subject to the Cannafull Spectrum Solutions Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about this order? Contact Cannafull Spectrum Solutions at cannafullspec.com before purchasing.

What's in the Box

The following items are confirmed as included based on source data for SKU HR-TRAYS-MD-PH, Medium variant (Set of 7):

• Stainless Steel Pharmaceutical Trays — Set of 7 (6 active trays matched to medium chamber + 1 operational spare)

Note: Additional accessories listed under SKU HR-TRAYS-MD-PH in source data (Premier Vacuum Pump, Oil Filter, Impulse Sealer, Vacuum Pump Oil, Mylar Bags 50 ct., Guide to Freeze Drying) are separate SKU variants within the same product family and are NOT included with this tray set purchase. Dimensions, weight, and warranty period are not specified in source data for this accessory SKU. Verify current box contents and warranty terms with Cannafull Spectrum Solutions at cannafullspec.com before ordering if these details are material to your purchasing decision.

Regional Compliance & Deployment Notes

• U.S. Deployment Only: This product is sold and shipped exclusively within the contiguous 48 United States through Cannafull Spectrum Solutions. No Canadian, international, or territory fulfillment is available through this storefront.
• Licensed Facility Use: This tray set is deployed in licensed commercial post-harvest processing facilities across the United States. Operators are responsible for verifying that freeze drying equipment and accessories meet applicable state and local regulatory requirements for their specific production category.
• Pharmaceutical-Grade Classification: The "pharmaceutical-grade" designation refers to the material and construction standard of the stainless steel trays as specified by the manufacturer. Operators in regulated industries should verify that this classification meets the specific compliance requirements of their licensing jurisdiction before procurement.
• Electrical and Facility Requirements: Electrical and facility integration requirements are governed by the freeze dryer unit, not the tray set. Consult the medium freeze dryer's installation documentation for chamber electrical specifications, ventilation requirements, and facility load calculations.
• Financing Availability: 0% interest financing with a $250 minimum down payment is available on qualifying Harvest Right products. Contact Cannafull Spectrum Solutions at cannafullspec.com to confirm whether financing terms apply to accessory SKUs including this tray set.

Product specifications, pricing, warranty terms, and availability are subject to change without notice. All technical data presented on this page is sourced from manufacturer documentation current at time of listing. Cannafull Spectrum Solutions is a factory-authorized Harvest Right dealer serving licensed commercial operators across the contiguous United States. This page was generated for SKU HR-TRAYS-MD-PH at MAP $129. Verify current specifications and terms at cannafullspec.com before placing your order.