Harvest Right Medium Freeze Dryer Replacement Trays 7-Pack | Pharma Grade

Quick Spec: 7 trays per pack | 7.5″ W x 18″ L x 0.75″ H per tray | Compatible: Harvest Right Medium Pharmaceutical Freeze Dryer | SKU: N-P-MFD-SH-006-PACK

Precision Control in Any Space

Every batch cycle that runs on mismatched or non-OEM trays is a batch cycle running blind. When tray dimensions fail to conform to chamber geometry, sublimation contact becomes uneven — moisture migration stalls in dead zones, terpene volatilization accelerates at exposed edges, and the finished product exits the cycle with variance baked in before a single quality check is run. That variance is not random. It is structural, it is repeatable, and it compounds across every subsequent cycle until the root cause is addressed. The cost is not just product quality — it is the cumulative loss of potency, shelf stability, and operator confidence that accumulates silently across weeks of production.

After deploying a correctly dimensioned, OEM-matched tray set, the processing environment changes in a measurable way. Chamber airflow distributes uniformly across the full sublimation surface. Each tray occupies its designed footprint within the shelf stack, eliminating the micro-gaps and edge overhangs that disrupt the lyophilization gradient. Batch-to-batch output becomes predictable — potency preservation and terpene retention are no longer outcomes that vary by operator or cycle sequence, but consistent results that the equipment is engineered to deliver. Production redundancy becomes achievable because every tray in the set performs identically, and scaling to multi-unit configurations carries no additional variance penalty.

The mechanism behind that consistency is dimensional precision. Each tray in this seven-pack measures 7.5 inches wide by 18 inches long by 0.75 inches high — tolerances engineered specifically for the Harvest Right Medium Pharmaceutical freeze dryer's shelf geometry. Seven trays per pack means a full chamber load is addressed in a single procurement, with no partial sets creating asymmetric loading conditions. The 0.75-inch tray depth is calibrated to the sublimation dynamics of the Medium Pharmaceutical unit, ensuring that product bed depth remains within the operational parameters of Smart Freeze™ automated cycle control. In practical terms, the Harvest Right Medium Pharmaceutical Trays deliver a full seven-tray chamber configuration at 7.5″ W x 18″ L x 0.75″ H per tray, purpose-matched to the Medium Pharmaceutical freeze dryer's lyophilization architecture.

Where This Belongs (and Doesn't)

These trays are designed exclusively for the Harvest Right Medium Pharmaceutical freeze dryer. Compatibility with other Harvest Right models or third-party lyophilization equipment is not confirmed by source data. Verify chamber shelf dimensions against your installed unit before ordering. Installation requires no tools — trays slide directly onto existing shelf rails within the Medium Pharmaceutical chamber.

How It Works

Lyophilization — freeze drying — operates by first freezing the product to a solid state, then reducing chamber pressure to allow ice to sublimate directly into vapor without passing through a liquid phase. This sublimation pathway is what preserves volatile terpene profiles and maintains cannabinoid potency that heat-based drying methods degrade. The tray is the interface between the product and this process: its dimensions determine how evenly the product bed contacts the shelf's thermal surface, how uniformly vapor escapes the product matrix, and whether the Smart Freeze™ automated cycle logic can execute its programmed sublimation ramp without compensating for uneven loading.

At 7.5 inches wide and 18 inches long, each tray in this set is dimensioned to occupy the full usable shelf width of the Medium Pharmaceutical chamber without lateral gap or overhang. The 0.75-inch tray wall height constrains product bed depth to a range that supports complete sublimation within standard cycle parameters — deep enough to process meaningful batch volumes, shallow enough that the sublimation front reaches the product bed floor before cycle termination. Seven trays per pack provides a complete chamber load, ensuring that shelf-to-shelf thermal uniformity is maintained across the full vertical stack rather than degraded by empty shelf positions or mismatched tray heights. In practical terms, the Harvest Right Medium Pharmaceutical Trays deliver seven precision-dimensioned sublimation surfaces at 7.5″ W x 18″ L x 0.75″ H, purpose-engineered to the thermal and geometric specifications of the Medium Pharmaceutical freeze dryer's lyophilization chamber.

Variant Configuration Guide

System Integration

• Direct Chamber Fit: Trays are dimensioned to the Harvest Right Medium Pharmaceutical freeze dryer's shelf geometry — no modification, trimming, or shimming required for installation.
• Smart Freeze™ Compatibility: Tray depth (0.75″ H) is calibrated to operate within the product bed depth parameters that Harvest Right's Smart Freeze™ automated cycle logic is programmed to process, preserving automated sublimation ramp integrity.
• Full Chamber Loading: Seven trays per pack provides a complete shelf stack for the Medium Pharmaceutical chamber, eliminating partial-load thermal asymmetry that degrades batch uniformity.
• Batch Processing Continuity: Maintaining a spare tray set on-site supports uninterrupted production redundancy — trays can be pre-loaded for the next cycle while the current batch completes, reducing inter-cycle downtime.
• Scalable Deployment: Multiple tray sets can be procured to support multi-unit freeze dryer installations, enabling parallel batch processing across a production line without cross-contamination risk between dedicated tray sets.

Facility Integration Data

The following table models tray set procurement requirements across scaled freeze dryer fleet configurations, providing procurement planning data for facilities operating multiple Harvest Right Medium Pharmaceutical units in parallel batch processing workflows.

Operator Field Notes

• Verify Model Before Ordering: The Medium tray set (7.5″ W x 18″ L) is not interchangeable with the Small (7.75″ W x 14″ L) or Large (9″ W x 20.5″ L) variants. Confirm your installed Harvest Right unit is the Medium Pharmaceutical model before placing an order.
• Pre-Load Protocol: Facilities running continuous batch processing should maintain a minimum of two tray sets per unit — one set in-cycle, one set pre-loaded — to eliminate inter-cycle downtime during high-throughput production periods.
• Product Bed Depth: The 0.75-inch tray wall height defines the maximum product bed depth for each tray. Overfilling above the tray wall disrupts sublimation uniformity and may interfere with shelf clearance within the chamber stack.
• Material Disclosure: Material specification for the Medium variant is not confirmed in source data. The Small variant is specified as stainless steel. Operators with material requirements for regulatory or sanitation compliance should confirm Medium tray material directly with Harvest Right or Cannafull Spectrum Solutions before procurement.
• Warranty Confirmation Required: No warranty period is specified in source data for this tray set. Confirm applicable warranty terms with Cannafull Spectrum Solutions prior to purchase if warranty coverage is a procurement requirement.
• Dedicated Tray Sets Per Product Line: In multi-product facilities, maintaining dedicated tray sets per product line eliminates cross-contamination risk between batch types and supports pharmaceutical-grade sanitation protocols.

Operator FAQ

Shipping & Logistics

• Shipping Jurisdiction: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this jurisdiction cannot be processed or fulfilled.
• Freight Classification: Tray sets ship as standard parcel freight. No liftgate, inside delivery, or special handling is required for single-set orders. Multi-set volume orders may ship freight — contact Cannafull Spectrum Solutions for freight logistics on orders of 10 or more sets.
• Returns: Returns are subject to the Cannafull Spectrum Solutions Return Policy. Defective items are handled under applicable warranty terms. Non-defective returns must be initiated within the return window specified in the Return Policy. Product must be in original, uninstalled condition to qualify for return consideration.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Commercial procurement inquiries, volume pricing, and fleet-scale orders: contact Cannafull Spectrum Solutions at cannafullspec.com or through the commercial accounts line listed on the website.

What's in the Box

• 7 x Pharmaceutical Freeze Dryer Trays — 7.5″ W x 18″ L x 0.75″ H each

Note: Box contents are confirmed based on source data for the Medium variant (7 trays per pack at stated dimensions). No additional accessories, documentation, or hardware are listed in source data for this tray set. Material specification, weight, and warranty documentation are not confirmed in source data for the Medium variant. Verify all specifications with Cannafull Spectrum Solutions or Harvest Right before finalizing procurement decisions.

Regional Compliance & Deployment Notes

• U.S. Deployment Only: Cannafull Spectrum Solutions distributes and ships within the contiguous 48 United States exclusively. This product listing, its pricing, and its fulfillment terms apply to U.S.-based facilities only.
• Facility Compliance Responsibility: Operators are responsible for ensuring that freeze drying equipment and associated accessories comply with applicable state and local regulations governing post-harvest processing in their licensed facility jurisdiction. Cannafull Spectrum Solutions does not provide regulatory compliance advisory services.
• Pharmaceutical-Grade Designation: The "pharmaceutical" designation in the product name refers to the Harvest Right product line classification and the equipment's design standards. It does not constitute a claim of FDA approval, pharmaceutical manufacturing certification, or compliance with any specific state or federal pharmaceutical production regulation.
• Sanitation and Material Compliance: Facilities operating under state-mandated sanitation or material contact standards should confirm tray material specification directly with Harvest Right before deployment, as material data for the Medium variant is not confirmed in available source documentation.
• Multi-State Operations: Facilities operating across multiple licensed jurisdictions should consult state-specific post-harvest processing regulations for each location. Equipment compatibility and operational requirements may vary by state licensing framework.

This product page reflects specifications sourced from Harvest Right manufacturer data as available at time of publication. Cannafull Spectrum Solutions makes no representations beyond what is confirmed in source data. Specifications, pricing, and availability are subject to change without notice. All purchases are subject to the Cannafull Spectrum Solutions Terms of Service and Return Policy available at cannafullspec.com.