Alien Hydroponics Vortex Pump Inlet Manifold 40mm Short

Precision Control in Any Space

Every irrigation system has a weakest link, and in space-constrained operations that link is almost always at the pump inlet. When the inlet assembly is a patchwork of mismatched fittings — adapters sourced from three different suppliers, threads that almost seal, diameters that almost match — the result is turbulent flow, micro-leaks, and pressure drop that no nutrient calculator can compensate for. The guesswork compounds: you adjust feed rates to chase a symptom, not a cause. Reservoir levels drift. Canopy response becomes unpredictable. The equipment is fighting you, and the cost is measured in every cycle that underperforms.

After integrating a native inlet manifold into the V-SYSTEM circuit, the feed path behaves as a single engineered assembly rather than a collection of compromises. Flow enters the pump cleanly, pressure is consistent from the first irrigation event to the last, and the operator is no longer troubleshooting hardware — they are managing a crop. In a compact facility where every square meter carries production weight, that shift from reactive maintenance to proactive cultivation is the operational difference that determines whether a cycle meets its target or misses it.

The Vortex Pump Inlet Manifold 40mm Short is a V-SYSTEM-native component machined to a 40mm inlet specification, designed to interface directly with Vortex Pump assemblies without modification, shimming, or supplemental sealing. The short-body form factor is the mechanism that makes it relevant in dense configurations: it reduces the linear footprint of the inlet assembly, allowing the pump to be positioned closer to the reservoir wall or within a tighter equipment bay without sacrificing the hydraulic integrity of the connection. Compatibility is not approximate — this manifold is engineered to the V-SYSTEM standard, which means flow characteristics, thread engagement, and material tolerances are matched to the pump it serves. In practical terms, the Vortex Pump Inlet Manifold 40mm Short delivers a native-fit, turbulence-minimized inlet connection for V-SYSTEM Vortex Pumps in installations where inlet assembly length is a binding constraint.

Where This Belongs (and Doesn't)

This component is a hydraulic fitting designed for integration within V-SYSTEM hydroponic pump assemblies. It is not a standalone pump, a flow controller, or a pressure regulator. Installation should follow V-SYSTEM manufacturer guidelines. If your facility operates pressurized irrigation circuits, consult your system documentation before substituting inlet manifold components.

How It Works

The inlet manifold is the interface between the reservoir and the pump — the point where fluid transitions from static storage to active pressurized flow. In a native-fit assembly, this transition is smooth: bore geometry is matched to the pump's inlet port, thread engagement is full and leak-free, and the manifold body does not introduce a restriction or an expansion that would alter the pump's designed flow curve. The 40mm specification defines the inlet bore diameter, which is the critical dimension governing how much fluid the pump can draw per unit time without cavitation or starvation. The short-body designation refers to the overall length of the manifold housing — a dimension that directly determines how much linear space the inlet assembly occupies between the reservoir bulkhead and the pump inlet port.

In practice, the short-body form factor is not a compromise — it is a deliberate engineering choice for installations where the pump must be positioned in close proximity to the reservoir wall, inside a compact equipment enclosure, or within a system layout where a standard-length manifold would create interference with adjacent components. By reducing the manifold body length while maintaining the full 40mm inlet bore, the component preserves hydraulic performance while eliminating the spatial constraint that would otherwise force the operator to reposition the pump or modify the reservoir. V-SYSTEM compatibility means the manifold interfaces with the Vortex Pump's inlet port using the manufacturer's specified thread form and sealing geometry — no thread tape improvisation, no reducer bushings, no flow-path discontinuities. In practical terms, the Vortex Pump Inlet Manifold 40mm Short provides a full-bore, native-thread inlet connection at a reduced housing length, maintaining V-SYSTEM hydraulic integrity in installations where inlet assembly footprint is a design constraint.

Commercial Assurance

• Factory-Authorized Supply Chain: Cannafull Spectrum Solutions is a factory-authorized dealer for this component. You are purchasing a genuine V-SYSTEM part, not an aftermarket substitute.
• Warranty: Warranty terms are not specified in available source data for SKU BD101-0030. Contact Cannafull Spectrum Solutions at cannafullspec.com or via the store contact page for current warranty information before purchasing if warranty coverage is a procurement requirement.
• Serviceability: As a native V-SYSTEM component, this manifold is replaceable within the standard V-SYSTEM service framework — no custom tooling or proprietary service contracts required.
• Local Availability: Available for in-person pickup in Longmont, Colorado, for operators who require same-day component sourcing to minimize system downtime.
• Flexible Procurement: Sezzle (4 payments of $11.94) and Affirm (2 interest-free payments of $23.87 every 15 days) are available at checkout for facilities managing capital expenditure across multiple line items.

System Integration

• V-SYSTEM Native Fit: Engineered to V-SYSTEM specifications — installs directly to the Vortex Pump inlet port without adapters, reducers, or thread modification.
• 40mm Inlet Bore: Maintains full-bore flow path at the pump inlet, preventing the flow restriction that occurs when non-native fittings introduce bore mismatches.
• Short-Body Form Factor: Reduces inlet assembly length for installations where pump-to-reservoir clearance is a binding spatial constraint.
• Top-Feed and Drain-to-Waste Compatibility: Suitable for both recirculating and single-pass irrigation architectures operating on the V-SYSTEM platform.
• Component-Level Serviceability: Replaceable as a discrete component — operators can swap the inlet manifold without replacing the full pump assembly, reducing maintenance cost and downtime.

Facility Integration Data

For facilities operating multiple V-SYSTEM Vortex Pump stations, maintaining a standardized inventory of native inlet manifolds eliminates the sourcing delays and compatibility risk that arise when a pump inlet fails mid-cycle and no direct replacement is on hand.

Fleet investment figures based on MAP pricing of $47.74 per unit. Spare inventory recommendations are operational guidelines, not manufacturer requirements. Actual spare requirements depend on facility cycle frequency and maintenance protocols.

Operator Field Notes

• Confirm the short-body variant is correct for your installation before ordering. If your pump bay has clearance for a standard-length manifold, verify whether the short variant is specified by your V-SYSTEM configuration documentation — do not assume shorter is always better.
• Inspect thread engagement at installation. A native-fit component eliminates the need for thread tape, but visual confirmation of full thread engagement before pressurizing the circuit is standard practice.
• Treat this as a consumable in high-cycle facilities. Inlet manifolds in continuous-operation irrigation systems are subject to wear at the sealing surfaces — stocking one spare per pump cluster reduces the risk of an unplanned cycle interruption.
• Do not use this manifold as a universal 40mm fitting. The V-SYSTEM specification governs thread form, bore geometry, and material — using this component outside its designed pump platform may result in leaks or mechanical failure.
• Local pickup in Longmont is available. For operators in the Colorado Front Range who need a replacement component without waiting on shipping, in-person pickup eliminates lead time entirely.
• Dimensions and weight are not specified in available source data. If your installation requires precise dimensional data for equipment bay planning, contact Cannafull Spectrum Solutions or the manufacturer directly before purchasing.

Operator FAQ

Shipping & Logistics

• Shipping Jurisdiction: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this jurisdiction cannot be fulfilled through this channel.
• Local Pickup: Available in Longmont, Colorado. Contact us through cannafullspec.com to confirm stock and schedule pickup before visiting.
• Returns: Returns are subject to our standard return policy. Component must be in original, uninstalled condition to qualify for return consideration. Contact cannafullspec.com/pages/return-policy for full terms before ordering.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about shipping, lead times, or order status: contact Cannafull Spectrum Solutions at cannafullspec.com.

What's in the Box

• 1x Vortex Pump Inlet Manifold 40mm Short (SKU: BD101-0030)

Box contents are based on available source data for this SKU. Accessory hardware, installation documentation, or supplemental fittings are not confirmed as included items. If your installation requires specific ancillary components, verify inclusion with Cannafull Spectrum Solutions before ordering. Do not assume any items beyond those listed above are included in the shipment.

Regional Compliance & Deployment Notes

• This product is a hydraulic fitting component for use within V-SYSTEM hydroponic pump assemblies. It is not subject to electrical safety certification requirements.
• Cannafull Spectrum Solutions fulfills orders within the contiguous 48 United States. Operators in Alaska, Hawaii, and U.S. territories should contact us directly to discuss fulfillment options.
• Facilities operating under state-licensed cultivation programs should verify that all irrigation system components meet any applicable facility equipment standards required by their licensing authority. Component-level compliance requirements vary by jurisdiction.
• This product is sold as a replacement or expansion component for existing V-SYSTEM installations. It is not a regulated substance and does not require special import or transport documentation within the United States.
• Local pickup is available in Longmont, Colorado, for operators requiring immediate component sourcing without shipping lead time.

Compliance information is provided as a general operational reference. Cannafull Spectrum Solutions does not provide legal or regulatory compliance advice. Operators are responsible for confirming that all equipment meets the requirements of their applicable state and local licensing authority. Specifications, pricing, and availability are subject to change without notice. Verify current product details at cannafullspec.com before making procurement decisions.