AC Infinity TERRAFORM 12 16000 BTU Portable AC | One-Duct Auto Switching

Quick Spec: SKU: AC-ACN12  |  Cooling: 16,000 BTU  |  Heating: 12,000 BTU  |  Max Draw: 1,400W / 11.8A @ 115V AC / 60Hz  |  Dimensions: 16.57 in. × 16.65 in. × 30.62 in.  |  Warranty: Effortless 2-Year Product Warranty

Precision Control in Any Space.

The enemy is not heat or humidity in isolation — it is the compounding cost of equipment that cannot coordinate. A cooling unit that runs blind to VPD. A heater that cycles without reference to canopy temperature. A dehumidifier that operates on a timer while the environment drifts. Every degree of uncontrolled variance, every humidity spike that goes unaddressed for twenty minutes, every manual adjustment that happens six hours too late — these are not inconveniences. They are yield events. They are quality events. They are the silent tax that fragmented environmental systems impose on every production cycle, and they accumulate invisibly until the harvest makes them visible.

After deployment, the environment stops being a variable you manage and becomes a parameter you set. The cultivation space holds its target temperature through light-on and light-off transitions without a technician present. VPD stays within the programmed band across the full photoperiod. The system reads ambient conditions in real time and shifts between cooling, heating, and fan circulation autonomously — the operator sets the target once, and the atmospheric cortex executes. Drainage events are reduced because the self-evaporative system recycles condensate back to the condenser. Pressure balance is configurable — positive, negative, or neutral — so odor containment is an engineered outcome, not a reactive one.

The mechanism behind this outcome is a 16,000 BTU dual-cylinder inverter compressor delivering cooling output and 12,000 BTU heating capacity through a single duct connection, drawing a maximum of 1,400W at 11.8A on a standard 115V AC / 60Hz circuit. The UIS (Unified Intelligence System) monitors temperature, humidity, and VPD simultaneously across 10 control levels, auto-switching between Cooling, Heating, Dehumidifying, and Circulation modes without operator input. Two additional duct ports enable 4-way ducting for pressure management and odor control. The unit operates across an ambient range of 61–95°F and 35–85% RH, with duct tube lengths of 78.00 in. (198.1 cm) and 66.00 in. (167.6 cm) included. In practical terms, the TERRAFORM 12 delivers 16,000 BTU cooling and 12,000 BTU heating through a single-duct automated ecosystem at 1,400W maximum draw on a 115V / 11.8A circuit.

Where This Belongs (and Doesn't)

Electrical note: The TERRAFORM 12 requires a dedicated 115V AC / 60Hz circuit rated for a minimum of 11.8A continuous draw. Verify circuit capacity and local electrical code compliance before installation. Duct routing should be assessed by a qualified HVAC technician for sealed-environment deployments. Additional ducting sold separately.

How It Works

The TERRAFORM 12 is built around a dual-cylinder inverter compressor rated at 16,000 BTU cooling and 12,000 BTU heating. The inverter architecture — as opposed to single-speed compressor designs — modulates output continuously rather than cycling between full-on and full-off states. This delivers higher precision in temperature maintenance, reduces energy consumption during steady-state operation, and produces lower acoustic output compared to fixed-speed compressor systems. Maximum power draw is 1,400W at 11.8A on a 115V AC / 60Hz supply.

The one-duct auto-switching architecture is the operational core of the system. A single duct connection handles cooling, heating, and air exchange output simultaneously. The integrated atmospheric cortex monitors temperature, humidity, and VPD in real time and executes mode transitions — between Cooling, Heating, Dehumidifying, and Circulation — autonomously based on the operator-defined target. There are 10 control levels available across all monitored parameters. The operator sets a temperature or VPD target; the system determines which mode is required to reach and hold that target without manual input. Dehumidification in advanced dry mode requires a second duct connection. Auto-switching function is not available when paired with Controller 69 Pro+ or earlier AC Infinity controller models.

The self-evaporative system recycles condensate water back to the condenser coil, reducing the frequency of manual drainage and extending unattended operational windows. Two additional duct ports are available for 4-way ducting configurations (additional ducting sold separately), enabling the operator to establish positive, negative, or neutral pressure within the enclosure — a direct mechanism for odor containment and cross-contamination control. The unit's physical footprint is 16.57 in. × 16.65 in. × 30.62 in. (42.1 cm × 42.3 cm × 77.8 cm), and integrated transportation wheels allow repositioning between production zones without equipment handling infrastructure. Included duct tube lengths are 78.00 in. (198.1 cm) and 66.00 in. (167.6 cm). In practical terms, the TERRAFORM 12 delivers autonomous 5-in-1 atmospheric control — cooling, heating, dehumidifying, circulation, and pressure management — within a 16.57 in. × 16.65 in. × 30.62 in. footprint at 1,400W / 11.8A on a standard 115V circuit.

System Integration

• Controller Compatibility: Auto-switching and VPD automation functions require a compatible AC Infinity smart controller. This function is NOT available when using Controller 69 Pro+ or earlier models — verify controller generation before integration.
• Duct Infrastructure: Single-duct operation covers cooling, heating, and air exchange. Dry mode requires a second duct. 4-way ducting for pressure management requires two additional duct ports (additional ducting sold separately). Included duct tube lengths: 78.00 in. (198.1 cm) and 66.00 in. (167.6 cm).
• Electrical Requirements: Dedicated 115V AC / 60Hz circuit, minimum 15A breaker recommended for 11.8A continuous draw. Confirm circuit isolation before deployment in multi-device environments.
• Pressure Management: Two optional duct ports enable positive, negative, or neutral pressure configuration — integrate with facility-level odor control and air exchange architecture as required.
• Repositionability: Integrated transportation wheels support redeployment between production zones without fixed installation — relevant for multi-phase or rotating production schedules.

Facility Integration Data

The following ROI reference data is provided to support fleet-scale procurement decisions; all figures are estimates based on published electrical specifications and should be validated against your facility's actual utility rates and operational schedules.

Operator Field Notes

• Controller Version Verification Is Non-Negotiable: Auto-switching and VPD automation are disabled when paired with Controller 69 Pro+ or earlier AC Infinity models. Confirm controller generation before deployment — this is not a firmware issue, it is a hardware compatibility boundary.
• Dry Mode Requires Two Ducts: Single-duct operation covers all modes except advanced dehumidification. If your production protocol requires aggressive dry-down cycles, plan duct infrastructure for dual-duct configuration before installation.
• Self-Evaporative System Reduces but Does Not Eliminate Drainage: The condensate recycling system extends unattended operational windows, but high-humidity environments may still require periodic drainage monitoring. Establish a maintenance interval based on ambient RH conditions in your facility.
• Pressure Configuration Is a Pre-Deployment Decision: Positive, negative, and neutral pressure modes require different duct routing. Determine your facility's pressure strategy before finalizing duct layout — retrofitting pressure configuration after installation adds labor cost.
• Pre-Order Lead Time Affects Production Scheduling: Expected ship date is Jun. 30, 2026. Orders containing pre-ordered items ship when ALL items are available. Do not schedule production zone commissioning against this unit until shipment is confirmed.
• Transportation Wheels Support Zone Rotation: The integrated wheel system allows repositioning between production zones without lifting equipment, but route planning through facility corridors should account for the 16.57 in. × 16.65 in. × 30.62 in. unit footprint.

Shipping & Logistics

• Shipping Jurisdiction: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this jurisdiction cannot be fulfilled through this listing.
• Pre-Order Ship Date: Expected to ship by Jun. 30, 2026. Orders containing pre-ordered items will ship when ALL items are available. Separate orders are required if immediate shipment of in-stock items is needed.
• Returns: Free and easy returns within 30 days of delivery for eligible items. Contact Cannafull Spectrum Solutions customer service to initiate a return authorization before shipping any unit back.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about shipping, lead times, or fleet orders? Contact Cannafull Spectrum Solutions directly at cannafullspec.com or through the store contact page.

What's in the Box

• TERRAFORM 12 All-In-One Climate Control A/C Unit (AC-ACN12)
• Duct Tube — 78.00 in. (198.1 cm)
• Duct Tube — 66.00 in. (167.6 cm)

Note: Additional ducting required for 4-way duct configurations and dual-duct dry mode operation is sold separately. Smart controller required for auto-switching and VPD automation functions is sold separately. Confirm all accessory compatibility before ordering. Box contents are based on manufacturer-published information and are subject to change without notice. Contact Cannafull Spectrum Solutions to confirm current box contents before purchase if this is a critical procurement factor.

Regional Compliance & Deployment Notes

• Electrical Code Compliance: The TERRAFORM 12 operates on 115V AC / 60Hz at 11.8A maximum draw. Installation must comply with the National Electrical Code (NEC) and applicable local amendments. A dedicated circuit with appropriate breaker sizing is required. Engage a licensed electrician for all circuit work.
• HVAC Permitting: Depending on jurisdiction and facility classification, installation of a 16,000 BTU climate control unit may require a mechanical permit. Verify permitting requirements with your local Authority Having Jurisdiction (AHJ) before installation.
• Odor Control & Pressure Management: Positive, negative, and neutral pressure configurations enabled by the 4-way ducting option may be subject to facility-level air quality and odor control regulations in licensed cultivation jurisdictions. Confirm compliance with your state's cannabis facility environmental requirements before configuring pressure mode.
• Licensed Facility Deployment: This unit is sold for deployment in licensed commercial cultivation facilities operating within the contiguous United States. Operators are responsible for ensuring all environmental control equipment meets the specifications required by their state licensing authority.
• Pre-Order Regulatory Timing: Expected ship date of Jun. 30, 2026 should be factored into facility commissioning timelines where environmental control equipment is a licensing inspection requirement. Do not schedule inspections dependent on this unit until shipment is confirmed.

Cannafull Spectrum Solutions provides product information for reference purposes. Compliance with federal, state, and local electrical, mechanical, and cannabis facility regulations is the sole responsibility of the purchasing operator. This listing does not constitute legal, engineering, or regulatory advice. Specifications are sourced from AC Infinity Inc. manufacturer data and are subject to change. Verify all specifications against current manufacturer documentation before making procurement decisions.