AC Infinity Peel and Stick Zipper | 7 ft. x 3 in. Double Sided | 2-Pack

Quick Spec: SKU: AC-SZA4-2  |  Width: 3.00 in.  |  Length: 7 ft. (213.4 cm)  |  Material: Nylon  |  Zipper Type: SBS Double-Sided  |  Pack Qty: 2  |  UPC: 819137022713  |  Manufacturer: AC Infinity Inc.

Precision Control in Any Space

Every unsealed gap in a partitioned grow environment is a liability — not a minor inconvenience. When plastic sheeting is cut open for access and left without a proper closure, humidity migrates, light bleeds across zones, and odor containment fails. The cost is not always visible on a single day, but it accumulates: vapor pressure deficit swings between rooms, photoperiod integrity is compromised by stray light, and the atmospheric separation that justifies a multi-zone layout collapses into a single uncontrolled environment. Equipment that requires you to choose between access and containment is equipment that is working against your operation.

After deployment, the partition becomes a functional boundary again. Operators move between zones without breaking the seal — entry and exit happen through a defined, closeable aperture that restores to an air and watertight state the moment the zipper closes. Humidity stays where it belongs. Light does not cross zone lines. Odor containment holds. The multi-zone layout performs as designed, and access no longer requires a trade-off against atmospheric discipline.

The mechanism is a 3.00 in. x 7 ft. (7.62 x 213.4 cm) nylon adhesive strip with a jam-proof SBS double-sided zipper that bonds directly to tarps, poly film, panda film, and vinyl sheeting without fasteners or frame hardware. The peel-and-stick backing creates a surface bond capable of withstanding elevated temperatures, and the SBS zipper design provides dual pull tabs so the entryway can be operated from either side — eliminating the one-directional access failure common to single-tab configurations. The air and watertight seal formed at closure actively blocks dust, debris, humidity transfer, and light transmission when used with opaque sheeting such as panda film. In practical terms, the AC Infinity Peel and Stick Zipper 2-Pack delivers two fully operational sealed entryways at 3.00 in. x 7 ft. each, installable on any flexible film surface without tools or permanent modification.

Where This Belongs (and Doesn't)

This product is a mechanical partition accessory. It does not interface with electrical systems, HVAC ducting, or any powered infrastructure. No licensed trade installation is required. Surface compatibility is limited to flexible sheeting materials — rigid walls, framed panels, and structural surfaces are outside the intended application scope.

How It Works

Each zipper unit in the 2-pack consists of a nylon adhesive strip measuring 3.00 in. wide by 7 ft. long (7.62 x 213.4 cm). The strip is backed with a peel-and-stick adhesive rated for elevated temperature environments, allowing it to bond to flexible sheeting materials — including tarps, poly film, panda film, and vinyl sheets — without mechanical fasteners, grommets, or frame support. Installation requires no tools: the operator marks the desired opening on the partition material, peels the backing, and presses the strip into position along the cut line.

The zipper mechanism is an SBS (Separating Bottom Stop) double-sided design. SBS zippers are engineered to allow the zipper to fully separate at the base, enabling the entryway to open completely from bottom to top — a functional requirement for full-body access through a film partition. The double-sided pull tab configuration means the zipper can be operated from either face of the partition, so personnel on both sides of the barrier retain independent access without coordination. The jam-proof construction of the zipper track prevents the slider from binding on the nylon teeth under normal operating conditions, including in environments with elevated humidity or particulate presence. When closed, the zipper forms an air and watertight seal that contains humidity, blocks light transmission when installed on opaque film, and prevents dust and debris ingress. In practical terms, the AC Infinity Peel and Stick Zipper 2-Pack installs two independent sealed entryways — each 3.00 in. x 7 ft. — on any compatible flexible film surface, with dual-sided operation and no tool requirement.

Commercial Assurance

System Integration

• Panda Film Compatibility: Bonds directly to panda film surfaces to create light-blocking, humidity-retaining entryways in opaque-partitioned grow zones
• Poly Film and Tarp Integration: Adhesive backing is rated for poly film and vinyl tarp surfaces commonly used in greenhouse and multi-zone facility layouts
• Atmospheric Zone Separation: When installed on sealed partitions, the zipper closure maintains the vapor pressure differential between adjacent zones by eliminating the unsealed gap created by improvised access cuts
• Multi-Unit Deployment: The 2-pack configuration supports simultaneous installation of dual entryways — one per partition face or two independent access points on a single barrier
• No Powered Infrastructure Required: Fully mechanical; integrates into any partition layout without electrical, HVAC, or control system modification

Facility Integration Data

The following table models procurement volume and unit economics for facilities deploying the AC Infinity Peel and Stick Zipper 2-Pack (AC-SZA4-2) across multiple partition points at a MAP price of $14.99 per 2-pack.

Operator Field Notes

• Surface Prep is the Critical Variable: Adhesive bond strength is directly dependent on surface cleanliness and dryness at the installation point — wipe the film surface with a dry cloth and allow any condensation to fully evaporate before pressing the strip
• Cut Line Precision: Score the partition film along the interior edge of the zipper strip after bonding, not before — this ensures the cut aligns with the zipper track and prevents overshooting the seal boundary
• SBS Zipper Orientation: The separating bottom stop must be fully engaged before operating the zipper from either side — confirm the base connector is seated before pulling the slider upward on first use
• High-Humidity Environments: In environments operating above 70% RH, inspect the adhesive bond line at the first 48-hour interval after installation to confirm full adhesion before relying on the seal for atmospheric separation
• Dual-Entry Configuration: When deploying both units in the 2-pack as a dual-entry setup on a single partition, space the two zipper strips at least 18 inches apart laterally to maintain structural integrity of the film between access points
• Panda Film Light Seal: For light-critical photoperiod applications, run a secondary strip of opaque tape along the outer perimeter of the zipper strip after installation to eliminate any residual light transmission at the adhesive edge

Operator FAQ

Shipping & Logistics

• Shipping Jurisdiction: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this jurisdiction cannot be fulfilled.
• Fulfillment: Orders are processed and shipped from authorized distribution points. Delivery timelines vary by destination within the contiguous U.S. — contact support for estimated transit times on volume orders.
• Returns: Products must be returned in original, uninstalled condition. Installed or used zipper strips cannot be accepted for return due to the nature of the adhesive bond. Contact Cannafull Spectrum Solutions before initiating any return.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

For procurement support, volume pricing, or order inquiries: contact Cannafull Spectrum Solutions directly through cannafullspec.com.

What's in the Box

• 2x AC Infinity Peel and Stick Zipper strips — each 3.00 in. x 7 ft. (7.62 x 213.4 cm)
• Nylon construction with SBS double-sided zipper mechanism on each strip
• Peel-and-stick adhesive backing pre-applied to each strip

Box contents confirmed from manufacturer source data (SKU: AC-SZA4-2). No additional accessories, installation hardware, or instructional materials are listed in source data. Weight not specified in manufacturer source data. Verify pack contents upon receipt and contact Cannafull Spectrum Solutions if any discrepancy exists between received contents and the above listing.

Regional Compliance & Deployment Notes

• Jurisdiction: This product is sold and shipped within the contiguous 48 United States only through Cannafull Spectrum Solutions.
• Regulatory Classification: The AC Infinity Peel and Stick Zipper is a mechanical partition accessory with no electrical, chemical, or powered components. It does not require regulatory approval for installation in commercial or agricultural facilities under standard U.S. building and agricultural codes. Operators should verify local facility compliance requirements independently.
• Licensed Facility Use: This product is deployed in licensed commercial cultivation and controlled-environment facilities across the United States. It does not itself confer, modify, or affect any facility license or compliance status.
• No Canadian Distribution: Cannafull Spectrum Solutions does not distribute to Canadian provinces or territories. This listing does not reference CSA certification, Health Canada compliance, or any Canadian regulatory framework.
• UPC Verification: UPC 819137022713 is the confirmed identifier for SKU AC-SZA4-2. Use this code for procurement records, inventory systems, and purchase order documentation.

Compliance information is provided for general reference only. Cannafull Spectrum Solutions makes no representation regarding the suitability of this product for any specific licensed facility's regulatory requirements. Operators are responsible for verifying that all equipment and materials meet the compliance standards applicable to their jurisdiction and license type. Product specifications are sourced from AC Infinity Inc. manufacturer data and are subject to change without notice.