AC Infinity Humidity Dome | Large Propagation Kit | 6x12 Cell Tray

Quick Spec: SKU AC-HDA7 | 6x12 Cell Grid | Up to 72 Seedlings | 3mm PET Plastic Dome | Dual Rotating Vents + Height Extension Kit | Dimensions: 20.98 in. × 10.78 in. × 9.60 in. (53.3 cm × 27.4 cm × 24.4 cm) | Manufacturer: AC Infinity Inc.

Precision Control in Any Space

Every propagation cycle that runs without a sealed atmospheric boundary is a cycle running on luck. Ambient humidity swings with HVAC cycles, door traffic, and seasonal pressure changes — none of which care about your clone strike window. Open trays and improvised covers cannot hold a vapor pressure differential, which means the microclimate your cuttings need during the first 72 hours is never actually there. The result is uneven rooting, extended cycle times, and batch variance that compounds across every run. The enemy is not bad genetics or poor technique — it is the absence of a controlled enclosure that holds conditions steady while the plant does its work.

After deployment, the propagation station operates as a defined atmospheric zone. Humidity is dialed in at the vent disk, locked, and held. Cuttings root on a predictable timeline because the vapor pressure environment is consistent from the first hour to the last. The 6x12 tray runs a full 72-site batch without tray swaps or mid-cycle interventions. The operator sets conditions once, checks periodically, and moves on — the dome holds the environment so labor does not have to.

The mechanism is a clear, 3mm heavy-duty PET plastic dome with a glossy finish that transmits light while maintaining structural integrity under repeated use. Dual built-in rotating vent disks — four adjustable vent disks total — allow the operator to lock in moisture or reduce internal humidity levels through smooth, effortless rotation, with no tools required. The heightened ceiling accommodates taller propagation stock, and the included height extension panels with additional adjustable vents raise the internal clearance further for larger cloning projects. The 6x12 seedling tray holds up to 72 seedlings, is built with an enhanced drain system to manage excess water, and seats into a durable, reusable drip tray that prevents leakage while supporting heavier loads. In practical terms, the AC Infinity Large Humidity Dome 6x12 delivers a sealed, vent-regulated propagation microclimate across a 6x12 cell grid at a footprint of 20.98 in. × 10.78 in. × 9.60 in. (53.3 cm × 27.4 cm × 24.4 cm).

Where This Belongs (and Doesn't)

The AC Infinity Large Humidity Dome 6x12 is a passive atmospheric enclosure. It requires no electrical connection and involves no HVAC integration. Placement decisions should account for ambient light availability and proximity to supplemental heat sources such as seedling heat mats.

How It Works

The dome body is formed from 3mm PET plastic with a gloss finish, providing the structural rigidity needed to maintain a consistent internal air column without flex or collapse under normal propagation conditions. The clear material allows ambient and supplemental light to reach the tray surface without diffusion loss, which matters when seedling heat mats and overhead lighting are operating simultaneously. The dome seats over the 6x12 seedling tray, which is sized to hold up to 72 seedlings and incorporates an enhanced drain system that channels excess water away from the root zone and into the drip tray below.

Atmospheric control is managed through dual built-in rotating vents positioned in the dome body. Four adjustable vent disks allow the operator to rotate between fully sealed — locking in maximum moisture for early-stage cuttings — and progressively open positions that reduce internal humidity as roots develop and the plant transitions toward ambient conditions. The rotation mechanism is designed for smooth, effortless adjustment without tools, allowing mid-cycle corrections without disturbing the tray. The heightened ceiling design provides clearance for taller propagation stock, and the included height extension panels expand internal vertical space further while adding additional adjustable vents to maintain airflow management at the increased height. The drip tray is constructed for durability and reuse across multiple propagation cycles, with a sealed base that prevents leakage and a load rating sufficient to support heavier tray configurations. In practical terms, the AC Infinity Large Humidity Dome 6x12 delivers operator-adjustable humidity control across a 72-site propagation tray within a sealed 3mm PET enclosure measuring 20.98 in. × 10.78 in. × 9.60 in. (53.3 cm × 27.4 cm × 24.4 cm), with height extension capability included.

System Integration

• Heat Mat Pairing: Designed for direct use with the AC Infinity SUNCORE Series seedling heat mats — place the heat mat beneath the drip tray to establish a bottom-heat + sealed-dome propagation stack that addresses both substrate temperature and vapor pressure simultaneously
• Grow Tent Compatibility: The 20.98 in. × 10.78 in. footprint fits standard propagation shelving and grow tent floor configurations; the dome height of 9.60 in. (plus extension kit) should be verified against available vertical clearance before placement
• Multi-Dome Arrays: The compact footprint supports side-by-side deployment on propagation benches, enabling staggered batch cycling without requiring dedicated propagation rooms
• Drain Management: The enhanced drain system in the seedling tray and the sealed drip tray base allow standard fertigation and watering protocols without manual water removal between cycles
• Portability: The practical size and lightweight construction allow the assembled dome-and-tray unit to be relocated between stations without disassembly, supporting flexible facility layouts

Facility Integration Data

The following table models per-unit and fleet-scale deployment economics for the AC Infinity Large Humidity Dome 6x12 at MAP pricing of $69.99 per unit, based on a 72-seedling-per-cycle capacity and standard propagation cycle assumptions.

Operator Field Notes

• Vent Protocol: Begin each propagation cycle with vent disks in the fully closed position to maximize internal humidity during the initial rooting phase; rotate progressively open as root development is confirmed to harden off cuttings without shock
• Extension Kit Deployment: Install the height extension panels when working with propagation stock that exceeds standard dome clearance — the additional vent positions on the extension panels maintain airflow management at the increased height and prevent stagnant air pockets
• Drain System Maintenance: The enhanced drain system in the 6x12 seedling tray requires periodic inspection to confirm drain channels are clear; blocked drains will cause standing water in the cell grid and increase disease pressure
• Heat Mat Integration: When pairing with the SUNCORE Series heat mats, position the mat beneath the drip tray — not beneath the seedling tray directly — to allow the drip tray's sealed base to act as a thermal buffer and prevent localized hot spots at the root zone
• Cycle Tracking: The drip tray and dome are rated for reuse across multiple cycles; establish a cleaning protocol between batches to prevent pathogen carryover, particularly when cycling between different genetics or plant families
• Portability Consideration: The assembled unit can be relocated without disassembly, but transport the dome and tray as a unit only when the tray is empty or lightly loaded — the seedling tray's lightweight construction is not rated for transport under full 72-seedling load with saturated media

Operator FAQ

Shipping & Logistics

• Fulfillment Zone: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. No fulfillment to Alaska, Hawaii, U.S. territories, or international destinations is available for this product.
• Freight Class: This product ships as standard parcel. No liftgate, freight, or pallet delivery is required for single-unit orders. Fleet orders of 10 or more units may ship on pallets — contact us prior to ordering to confirm freight arrangements.
• Returns: Defective units are handled under manufacturer warranty terms. Contact Cannafull Spectrum Solutions within the applicable return window with order documentation and a description of the defect. Warranty period not specified in source data — verify current terms before purchase.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Fleet and volume inquiries: Contact Cannafull Spectrum Solutions directly for multi-unit pricing, lead times, and coordinated delivery scheduling.

What's in the Box

• Humidity Dome × 1 (3mm PET plastic, gloss finish, clear)
• Base Tray × 1 (durable, reusable drip tray with sealed base)
• 6x12 Seedling Tray × 1 (supports up to 72 seedlings, enhanced drain system)
• Vent Disks × 4 (adjustable, tool-free rotation)
• Height Extension Kit Panels × 1 set (includes additional adjustable vents)

Contents confirmed from manufacturer assembly documentation (AC Infinity Inc., source: PRODUCT_PAGE and MANUAL_PDF). Cannafull Spectrum Solutions ships factory-sealed units. If your shipment arrives with missing or damaged components, contact us immediately with your order number and photographic documentation before opening a return request.

Regional Compliance & Deployment Notes

• Shipping Jurisdiction: This product is available for shipment within the contiguous 48 United States only through Cannafull Spectrum Solutions. Orders from outside this zone cannot be fulfilled.
• Electrical Classification: The AC Infinity Large Humidity Dome 6x12 is a passive, non-electrical propagation enclosure. It requires no power connection and is not subject to electrical code compliance requirements. No UL, ETL, or CE certification is applicable or required for this product category.
• Facility Use: This product is deployed in licensed commercial cultivation facilities across the United States. Operators are responsible for ensuring that propagation practices, including the plant species being propagated, comply with applicable state and local licensing requirements.
• Material Safety: The dome is constructed from PET plastic. No special handling, ventilation, or PPE requirements apply under normal propagation use conditions.
• Warranty & Compliance Documentation: Warranty period is not specified in available source data. Operators requiring warranty documentation for facility compliance records should contact AC Infinity Inc. or Cannafull Spectrum Solutions directly prior to purchase to obtain current warranty terms in writing.

Product specifications, pricing, and availability are subject to change without notice. All data presented on this page is sourced from AC Infinity Inc. manufacturer documentation. Cannafull Spectrum Solutions makes no independent claims beyond those supported by manufacturer-provided specifications. UPC: 819137023864. Verify current product details at cannafullspec.com or by contacting our team directly before placing fleet orders.