AC Infinity Heavy Duty Reusable Fabric Pots | 3 Gallon | 5-Pack

Quick Spec: SKU AC-PFP3 | 10 in. H × 10 in. Dia. (25.4 cm × 25.4 cm) | 3.4-Gal True Capacity | 500G Nonwoven Fabric | Steel Rings | BPA-Free | 5-Pack | UPC: 819137021662

Precision Control in Any Space

Every production cycle that runs through a rigid plastic container or a thin-walled fabric bag is a cycle where root architecture is left to chance. Circling roots, waterlogged media, and heat-trapped root zones are not random events — they are the predictable output of containers that were never designed to support repeatable crop performance. The cost is not always visible in a single harvest, but it compounds: uneven canopy development, inconsistent uptake, and the labor overhead of diagnosing plant stress that originates below the media surface. When the container is the variable, every other input becomes harder to control.

After deployment, the root zone stops being a liability. Each container in the five-unit set delivers a structurally consistent growing environment — air pruning terminates circling roots at the fabric wall, forcing lateral branching and even soil colonization. Drainage is passive and continuous, eliminating the overwatering failure mode without operator intervention. Plants move when the production schedule demands it, not when logistics allow, because the reinforced nylon handles and rigid steel ring architecture make transport a one-person operation. Across a multi-container run, the result is a canopy that responds predictably to nutrient and light inputs because the root zone beneath it is uniform.

The mechanism behind that consistency is material specification. The AC-PFP3 is constructed from 500G-rated nonwoven fabric — a thickness classification that places it above standard-weight alternatives and provides the structural integrity required for repeated wash-and-reuse cycles without deformation. Each pot measures 10 in. H × 10 in. Dia. (25.4 cm × 25.4 cm) and holds a true 3.4-gallon soil volume when filled to the dual stitch line, providing more root space than nominal-capacity competitors. Built-in steel rings at the rim accept twist-tie passthrough for low-stress training integration without cutting, drilling, or modifying the container. The BPA-free nonwoven fabric is cleared for food-crop and specialty-crop production environments. In practical terms, the AC-PFP3 delivers a 3.4-gallon true root zone per unit across a five-container deployment, constructed from 500G nonwoven fabric with steel ring reinforcement and nylon handles rated for repeated transport cycles.

Where This Belongs (and Doesn't)

The AC-PFP3 is a passive growing container. It does not require electrical connection, irrigation automation, or environmental control integration. Placement decisions should account for drainage clearance beneath each unit. Consult your facility's cultivation protocol before integrating new container formats into an active production cycle.

How It Works

The AC-PFP3 operates on a passive root management principle: when a root tip reaches the permeable fabric wall, the reduced humidity at the wall surface causes the tip to desiccate and terminate — a process called air pruning. Rather than circling the container interior as they would in a rigid pot, roots branch laterally from the pruned tip, producing a dense, fibrous root mass that colonizes the full soil volume. This even colonization is what drives consistent water and nutrient uptake across the root zone. The 500G nonwoven fabric provides sufficient wall density to maintain structural integrity under repeated fill-and-drain cycles while remaining permeable enough to sustain the air-pruning mechanism at the wall boundary.

Container geometry is specified at 10 in. H × 10 in. Dia. (25.4 cm × 25.4 cm), with a true capacity of 3.4 gallons when filled to the dual stitch line — a reference mark built into the fabric that eliminates guesswork in media loading and ensures consistent soil volume across every unit in the five-pack. The dual stitch line also functions as a structural reinforcement point, maintaining container shape under the weight of saturated media. Steel rings integrated at the rim serve two functions: they maintain the circular opening geometry during transport and media loading, and they provide anchor points for twist-tie passthrough, enabling low-stress training (LST) integration without any modification to the container. Nylon handles are stitched into the upper wall and rated for plant transport without handle separation under load.

The nonwoven fabric construction is BPA-free, qualifying the AC-PFP3 for use in food-crop and specialty-crop production environments where material safety documentation is required. The fabric is machine-washable, supporting a reuse protocol across multiple production cycles without structural degradation. Reinforced stitching at stress points — handles, base perimeter, and dual stitch line — extends service life under the mechanical demands of a commercial production schedule. In practical terms, the AC-PFP3 delivers a 3.4-gallon true root zone per unit, constructed from 500G BPA-free nonwoven fabric with steel ring reinforcement, machine-washable construction, and nylon handles rated for repeated transport across a five-container deployment set.

System Integration

• Irrigation Compatibility: The permeable 500G nonwoven fabric wall is compatible with drip irrigation, hand-watering, and flood-and-drain schedules. Drainage is passive and continuous — no tray or catch basin modification is required, but drainage clearance beneath each unit must be confirmed in the facility layout before deployment.
• Low-Stress Training (LST) Integration: Built-in steel rings accept standard twist ties without modification, enabling LST protocols to be executed directly at the container without additional hardware. This eliminates the need for external trellis anchoring at the container level.
• Environmental Control Compatibility: The fabric wall's passive temperature regulation reduces root zone heat accumulation in high-ambient-temperature environments, reducing the thermal load that environmental control systems must compensate for at the canopy level.
• Transport and Staging: Reinforced nylon handles support single-operator plant movement between propagation, vegetative, and flowering zones without requiring additional transport equipment at the container level.
• Reuse Protocol: Machine-washable construction supports a documented wash-and-reuse cycle between production runs, reducing per-cycle container cost and waste volume in facilities operating under sustainability or waste-reduction mandates.

Facility Integration Data

The following table models per-unit and fleet-level cost across standard deployment scales, based on the MAP price of $21.99 per 5-pack ($4.40 per unit). Use this data to project container budget against production capacity and reuse cycle amortization.

Operator Field Notes

• Fill to the Dual Stitch Line: The dual stitch line is the manufacturer's reference mark for true 3.4-gallon capacity. Filling above this line reduces structural integrity under saturated media weight and voids the capacity specification. Train all cultivation staff to use this line as the standard fill reference.
• Drainage Clearance is Non-Negotiable: The permeable fabric wall drains continuously. Placing containers directly on non-draining surfaces without a catch tray or elevated platform will result in standing water accumulation beneath the unit. Confirm drainage infrastructure before deploying at scale.
• Wash Protocol Between Cycles: Machine-washable construction supports reuse, but a documented wash protocol — including drying before media reload — is required to prevent pathogen carryover between production cycles. Establish this protocol before the first reuse cycle, not after a contamination event.
• Steel Ring Orientation: The steel rings at the rim maintain container geometry during transport and media loading. Do not compress or deform the ring during stacking or storage — ring deformation affects the twist-tie passthrough function and container opening geometry.
• LST Twist-Tie Routing: The steel rings accept standard twist ties without modification. Route ties through the ring, not around the fabric wall, to avoid stress concentration on the nonwoven material at the rim.
• Fleet Uniformity: All five units in the AC-PFP3 pack are identical in specification. When deploying across a production row, confirm that media volume, irrigation schedule, and plant spacing are consistent across all units to realize the uniformity benefit of standardized container geometry.

Operator FAQ

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this territory cannot be fulfilled.
• Processing & Transit: Orders are processed according to current fulfillment timelines. Contact support for lead time confirmation on multi-pack or fleet-quantity orders before placing.
• Returns: Returns are accepted subject to the conditions outlined in the Cannafull Spectrum Solutions Return Policy. Items must be in original, unmodified condition. Contact support@cannafullspec.com to initiate a return authorization before shipping any unit back.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about shipping, lead times, or fleet orders: contact Cannafull Spectrum Solutions at support@cannafullspec.com

What's in the Box

• 5 × AC Infinity Heavy Duty Fabric Pots, 3-Gallon (SKU: AC-PFP3)
• Each unit: 10 in. H × 10 in. Dia. (25.4 cm × 25.4 cm), 500G nonwoven fabric construction, steel rim rings, nylon handles, dual stitch line fill reference

Box contents confirmed against manufacturer source data for SKU AC-PFP3. No additional accessories, growing media, nutrients, or hardware are included. If your shipment is missing any listed item, contact Cannafull Spectrum Solutions at support@cannafullspec.com before use.

Regional Compliance & Deployment Notes

• Shipping Jurisdiction: Available for deployment in licensed commercial facilities across the contiguous 48 United States. Cannafull Spectrum Solutions does not ship to Alaska, Hawaii, U.S. territories, or international addresses.
• Material Safety: The AC-PFP3 nonwoven fabric is manufacturer-stated as BPA-free. Operators in state-licensed production facilities should verify material safety documentation against applicable state agricultural or cannabis cultivation compliance requirements independently.
• No Electrical or Mechanical Compliance Requirements: The AC-PFP3 is a passive growing container with no electrical, plumbing, or mechanical components. No UL listing, ETL certification, or electrical code compliance review is required for deployment.
• Regulated Crop Environments: Facilities operating under state cannabis cultivation licenses, USDA organic certification, or food safety compliance frameworks should confirm that fabric container materials meet their specific program documentation requirements before deploying at production scale.

Compliance information is provided for general reference only. Cannafull Spectrum Solutions does not provide legal, regulatory, or compliance advisory services. Operators are solely responsible for confirming that all equipment and materials meet the requirements of their applicable state and federal regulatory frameworks. Specifications subject to change by the manufacturer without notice — confirm current specifications with Cannafull Spectrum Solutions before placing fleet-scale orders.