AC Infinity Hanging Herb Drying Rack | 18 in. Diameter | Four Tiers

Quick Spec: SKU: AC-DRA44  |  Diameter: 18" (45.7 cm)  |  Length: 31" (78.7 cm)  |  Chamber Height: 6.75" per tier  |  Tiers: 4  |  Mesh: Non-toxic polyester  |  Frame: Flexible steel wireframe  |  UPC: 819137022027

Four Tiers. One Footprint. Zero Wasted Harvest Days.

Post-harvest is where yield becomes revenue — and it is also where the most preventable losses occur. Improvised drying setups create uneven airflow, force material into contact with non-breathable surfaces, and consume space that cannot be reclaimed between cycles. When a drying solution cannot collapse, cannot reposition, and cannot scale to the volume of a harvest, the operator absorbs the cost in degraded material quality, extended dry times, and the labor overhead of managing a system that was never designed for the work. That silent erosion of output is the real price of equipment that fights you at the end of every run.

After deployment, the post-harvest station operates differently. Material is distributed across four independent mesh chambers, each receiving unrestricted airflow on all surfaces simultaneously. The rack occupies a single vertical footprint — hanging from an existing anchor point without additional hardware — and when the cycle is complete, the entire unit collapses flat for storage or repositioning. The drying station becomes a controlled, repeatable step in the production sequence rather than an afterthought assembled from whatever is available.

The mechanism behind that outcome is straightforward: a flexible steel wireframe maintains chamber geometry under load while remaining fully collapsible when unloaded, and non-toxic polyester mesh on every tier surface allows passive airflow to move through and around material without trapping moisture against a solid surface. Four chambers at 6.75 inches of clearance each, stacked within a 31-inch total hanging length and an 18-inch (45.7 cm) diameter footprint, provide tiered capacity in a column that fits inside a standard grow tent or closet without occupying floor space. A built-in Velcro loop at the top of the frame enables direct attachment to tent crossbars, closet rods, or overhead anchor points without requiring separate hooks or hardware. In practical terms, the AC Infinity Drying Rack 44 delivers four independent drying chambers across an 18-inch diameter, 31-inch hanging column using a collapsible steel-and-polyester construction that requires no tools and no additional mounting hardware.

Where This Belongs (and Doesn't)

The AC-DRA44 is a passive drying and curing tool. It does not generate airflow, control temperature, or regulate humidity. For optimal drying outcomes, it should be deployed within an environment where atmospheric conditions — temperature, relative humidity, and air circulation — are actively managed by dedicated climate control equipment. This rack is not a substitute for environmental control; it is a material-handling component within a controlled post-harvest environment.

How It Works

The AC-DRA44 is constructed around a flexible steel wireframe that holds each of the four tiers open under the weight of drying material, maintaining chamber geometry and preventing mesh surfaces from collapsing inward and restricting airflow. The wireframe is enveloped in non-toxic polyester mesh — the same material forming the floor and walls of each chamber — which allows air to pass through the material bed from below, above, and laterally. This three-dimensional airflow exposure is the functional difference between a mesh drying chamber and a flat screen: material resting on mesh receives airflow on the underside simultaneously with ambient airflow on the upper surface, reducing the moisture gradient that causes uneven drying.

Each of the four chambers provides 6.75 inches of vertical clearance, accommodating whole branches, trimmed buds, or loose material without compression. The four chambers are stacked within a total hanging length of 31 inches (78.7 cm) and a diameter of 18 inches (45.7 cm), creating a vertical drying column that occupies the same ceiling-to-floor footprint as a single hanging point. The built-in Velcro loop at the top of the assembly attaches directly to tent crossbars, closet rods, or any overhead horizontal anchor without requiring carabiners, S-hooks, or additional rigging hardware. When the drying cycle is complete, the flexible frame collapses flat — the entire unit folds down to a compact form for storage or transport between cycles. In practical terms, the AC Infinity Drying Rack 44 provides four 18-inch diameter mesh chambers at 6.75 inches of clearance each, hanging in a 31-inch column from a single Velcro anchor point, with a collapsible steel frame that stores flat when not in use.

Commercial Assurance

System Integration

• Climate Control Pairing: Deploy within an AC Infinity CLOUDLAB tent or equivalent enclosed environment managed by an CLOUDLINE or CLOUDRAY fan system to maintain the atmospheric conditions required for consistent dry times across all four chambers.
• Vertical Stacking: Multiple AC-DRA44 units can be hung in series from a single overhead anchor point or distributed across multiple tent crossbars to scale drying capacity proportionally with harvest volume.
• Controller Ecosystem: While the rack itself is passive, the surrounding drying environment should be governed by a programmable controller — such as the AC Infinity UIS Controller 69 Pro — to automate humidity and temperature setpoints across the drying cycle without manual intervention.
• Storage Integration: The collapsible frame allows multiple units to be stored flat in a single bin or shelf between cycles, eliminating the permanent space penalty associated with rigid drying frames.
• Material Compatibility: Confirmed for flowers, buds, herbs, fruits, seeds, and vegetables — the non-toxic polyester mesh is safe for direct contact with consumable plant material.

Facility Integration Data

The following table models fleet-level acquisition cost and drying capacity scaling for operators deploying multiple AC-DRA44 units across a post-harvest workflow. Each unit provides four chambers; total chamber count scales linearly with unit count.

Operator Field Notes

• Load Distribution: Distribute material evenly across all four chambers at the time of loading — uneven loading concentrates weight on one side of the flexible frame and can cause the rack to hang at an angle, reducing airflow uniformity across tiers.
• Anchor Point Selection: The built-in Velcro loop is rated for the weight of the loaded rack; confirm that the anchor point (tent crossbar, closet rod, or overhead fixture) is structurally adequate for the combined weight of the rack and its material load before hanging.
• Airflow Positioning: Position the rack so that no tier surface is flush against a tent wall or solid partition — a minimum clearance of several inches on all sides ensures that passive airflow can circulate around the full diameter of each chamber.
• Collapse and Storage: When collapsing the frame for storage, ensure all material has been removed and the mesh surfaces are dry before folding — storing the rack with residual moisture trapped in folded mesh can degrade the polyester over repeated cycles.
• Cleaning Protocol: The polyester mesh can be wiped down or rinsed with water between cycles; allow the rack to hang open and fully air-dry before reloading to prevent cross-contamination between harvest batches.
• Multi-Unit Spacing: When hanging multiple AC-DRA44 units in the same environment, maintain lateral spacing between units so that the airflow envelope of each rack is not blocked by an adjacent unit.

Operator FAQ

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this territory cannot be fulfilled.
• Fulfillment: Orders are processed and shipped from authorized distribution. Estimated transit times will be provided at checkout based on destination. Cannafull Spectrum Solutions is not responsible for carrier delays once the shipment has been tendered to the carrier.
• Returns: Returns are accepted subject to the conditions outlined in the Cannafull Spectrum Solutions Return Policy. Items must be in original, uninstalled condition with original packaging to qualify for return consideration. Review full terms at cannafullspec.com/pages/return-policy before ordering.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Contact: For pre-sale questions, order status, or post-sale support, reach Cannafull Spectrum Solutions at cannafullspec.com or through the contact channels listed on the website.

What's in the Box

• 1x AC Infinity Drying Rack 44 (AC-DRA44) — 18" diameter, 4-tier polyester mesh drying rack with flexible steel wireframe and built-in Velcro hanging loop

Note: Accessory items, additional hooks, and supplemental hardware are not included and are not confirmed as part of the standard package for this SKU. Contents listed above reflect confirmed manufacturer source data. If you receive a unit with missing or damaged components, contact Cannafull Spectrum Solutions immediately prior to use.

Regional Compliance & Deployment Notes

• Jurisdiction: The AC-DRA44 is sold and shipped within the contiguous 48 United States through Cannafull Spectrum Solutions as a factory-authorized dealer.
• Regulatory Status: The AC-DRA44 is a passive mechanical product — a drying rack — and does not contain electrical components, emit radiation, or require regulatory approval for use as a standalone item. Operators are responsible for ensuring that the post-harvest activities conducted using this equipment comply with all applicable state and local licensing, processing, and handling regulations in their jurisdiction.
• Facility Compliance: Deployment of this rack within a licensed post-harvest or processing facility does not constitute compliance with any specific state program requirement. Operators should consult their compliance officer or licensing authority regarding approved equipment and processing methods.
• Material Safety: The polyester mesh and steel wireframe construction uses non-toxic materials confirmed by the manufacturer as safe for contact with consumable plant material. No third-party food-contact certification data is available in manufacturer source data for this SKU; operators with specific certification requirements should contact AC Infinity directly for material safety documentation.

Cannafull Spectrum Solutions provides this product information in good faith based on manufacturer-supplied data current at the time of listing. Specifications, warranty terms, and compliance status are subject to change by the manufacturer without notice. Verify all critical specifications directly with AC Infinity Inc. prior to procurement decisions. This listing does not constitute legal, regulatory, or compliance advice.