AC Infinity Grow Tent Trellis Netting | Flexible Elastic Cords | 2x4’

Quick Spec: SKU AC-ETB24  |  Non-Stretched: 18.9 x 34.65 in. (48 x 88 cm)  |  Stretched: 2 x 4 ft. (61 x 121.9 cm)  |  66 Cells  |  Elastic Polyester  |  Interweaving Design  |  2-Year Warranty  |  $10.99 USD

Precision Control in Any Space

When canopy architecture is left to chance, the cost accumulates silently — stems competing for vertical space, lateral branches collapsing under fruit load, and operators spending hours per cycle manually repositioning growth that should have been guided from the start. Rigid netting compounds the problem: fixed-grid systems cannot conform to variable canopy geometry, they abrade stems at contact points, and they lock operators out of clean pruning and picking access when it matters most. Every cycle run without a structured support system is a cycle where yield potential is surrendered to disorder.

After deployment, the canopy picture changes entirely. Lateral branches are distributed evenly across the available footprint, each stem guided into its own cell rather than competing with adjacent growth. Heavy fruit and bud clusters are supported at the node rather than stressing the main stem. Operators move through the canopy cleanly during pruning and harvest without fighting through tangled growth or working around fixed hardware that was never designed to accommodate access. The support structure becomes invisible infrastructure — present, functional, and out of the way.

The mechanism behind that outcome is the material and geometry of the AC-ETB24 itself. Elastic rubber cords shrouded in high-quality polyester form an interweaving grid of 66 individual cells. In the non-stretched state, the net measures 18.9 x 34.65 in. (48 x 88 cm), compact enough to store and reposition between cycles. Under load, it stretches to a full 2 x 4 ft. (61 x 121.9 cm) working footprint, conforming to canopy geometry rather than forcing the canopy to conform to it. Non-abrasive cell construction protects stem tissue at every contact point, while versatile steel hooks clip directly onto the grow tent frame and allow height adjustment as the canopy develops. The net is equally deployable in horizontal, vertical, or A-frame configurations, and folds down for relocation into smaller grow spaces without requiring new hardware. In practical terms, the AC-ETB24 delivers structured canopy support across a 2 x 4 ft. stretched footprint using 66 elastic polyester cells with height-adjustable steel hook mounting.

Where This Belongs (and Doesn't)

Installation configuration — horizontal, vertical, or A-frame — should be selected based on canopy architecture and operator access requirements. The AC-ETB24 is designed for grow tent frame attachment via steel hooks. Consult your facility's structural and environmental protocols before modifying mounting configurations in permanent or pressurized enclosures.

How It Works

The AC-ETB24 operates on a straightforward structural principle: elastic compliance under load. The core of each cord is elastic rubber, which allows the grid to stretch and conform as plant mass increases and lateral branches push outward into adjacent cells. The rubber core is shrouded in high-quality polyester, which provides the load-bearing surface that contacts stem tissue. Because polyester is non-abrasive against plant stems, the net can bear the weight of heavy climbing fruits, vegetables, and dense bud clusters without creating the friction damage or pressure necrosis associated with rigid monofilament or wire grid systems.

The interweaving design geometry creates 66 discrete cells across the non-stretched footprint of 18.9 x 34.65 in. (48 x 88 cm). Each cell functions as an individual support zone — a defined space into which a branch or stem is guided and held. As the canopy develops and load increases, the elastic matrix stretches to accommodate, expanding to the full 2 x 4 ft. (61 x 121.9 cm) working footprint without losing structural integrity or cell definition. This means operators are not forced to choose between early-stage fit and late-stage support capacity — the net scales with the plant.

Mounting is executed via versatile steel hooks that clip directly onto the grow tent's frame rails. The hooks are height-adjustable, allowing the net plane to be repositioned vertically as the canopy develops — a critical capability for operators running progressive training protocols where the support plane needs to rise with the canopy rather than remain fixed at a single height. When a cycle ends or a space reconfiguration is required, the net folds into a compact form and the hooks relocate, making the AC-ETB24 a reusable, repositionable asset rather than a single-use consumable. In practical terms, the AC-ETB24 delivers a 66-cell elastic polyester support matrix across a 2 x 4 ft. stretched footprint with height-adjustable steel hook mounting on standard grow tent frame rails.

Commercial Assurance

System Integration

• Grow Tent Ecosystem Compatibility: Steel hooks are designed for direct attachment to standard grow tent frame rails; confirm rail diameter and spacing against hook geometry before installation in non-standard enclosure systems.
• Canopy Training Protocol Alignment: Height-adjustable mounting allows the net plane to track canopy development across progressive training cycles without requiring hardware replacement between stages.
• Multi-Configuration Deployment: Horizontal, vertical, and A-frame orientations are all supported by the same hardware set; no additional mounting accessories are required for orientation changes within a compatible tent frame.
• Space Reconfiguration: Foldable form factor and relocatable hooks allow the net to be redeployed in reduced-footprint spaces without cutting or permanent modification to the net structure.
• Supplemental Netting: For canopy footprints exceeding 2 x 4 ft., multiple AC-ETB24 units can be deployed in adjacent sections; confirm hook anchor spacing to maintain consistent cell geometry across the combined footprint.

Facility Integration Data

The table below provides per-unit and fleet-scale cost reference for procurement planning across single-operator and multi-unit facility deployments of the AC-ETB24 at the $10.99 USD MSRP.

Operator Field Notes

• Install at canopy onset, not at load: Deploy the AC-ETB24 before lateral branches reach the net plane. Guiding stems into cells during early vegetative development produces more uniform distribution than retrofitting support onto an already-crowded canopy.
• Use height adjustment proactively: The steel hooks allow vertical repositioning — raise the net plane incrementally as the canopy develops rather than waiting until stems are pressing hard against the grid. Early adjustment prevents cell overcrowding in the upper third of the canopy.
• Confirm hook-to-rail fit before full deployment: Steel hooks are designed for standard grow tent frame rails. Verify hook geometry against your specific tent frame profile before loading the net with plant mass.
• Fold and store between cycles: The net folds to a compact form for storage. Inspect elastic cords for fatigue or deformation at the end of each cycle before redeployment — replace units showing cord elongation that does not recover after unloading.
• A-frame configuration for climbing species: For vining or climbing cultivars, the A-frame orientation distributes lateral load more evenly than horizontal deployment and reduces the risk of net plane sag under concentrated fruit weight at the apex.
• Multi-unit adjacency: When deploying multiple units side by side, align hook anchor points to maintain consistent cell geometry across the seam. Misaligned adjacent nets create irregular cell sizes at the junction that can concentrate stem load unevenly.

Operator FAQ

Shipping & Logistics

• Shipping Jurisdiction: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this jurisdiction cannot be fulfilled.
• Carrier & Transit: Standard carrier selection and transit times apply at checkout. Expedited shipping options may be available depending on destination and order timing.
• Returns: Free and easy returns are accepted within 30 days of purchase for eligible items in original condition. Defective units are covered under the 2-Year Product Warranty — contact support for warranty claim initiation.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about your order? Contact Cannafull Spectrum Solutions directly through the store contact page or support channel before initiating a return or warranty claim.

What's in the Box

• 1x AC Infinity Grow Tent Trellis Netting — 66-cell elastic polyester interweaving grid (SKU: AC-ETB24)
• Steel hooks for grow tent frame rail attachment (quantity and hook profile as packed by manufacturer)

Box contents confirmed from manufacturer product documentation. Accessory quantities (hook count) are as packed by the manufacturer and may vary. Weight and packaged dimensions are not specified in manufacturer source data. Do not rely on unconfirmed specifications for logistics or compliance planning. If exact accessory counts are required for procurement documentation, contact Cannafull Spectrum Solutions prior to ordering.

Regional Compliance & Deployment Notes

• Jurisdiction: The AC-ETB24 is available for sale and shipment within the contiguous 48 United States only. Cannafull Spectrum Solutions does not fulfill orders to addresses outside this jurisdiction.
• Facility Compliance: The AC-ETB24 is a passive mechanical support product. It does not contain electrical components, pressurized systems, or chemical inputs. No electrical, HVAC, or chemical handling compliance certifications are required for deployment of this product.
• Licensed Facility Use: Operators deploying the AC-ETB24 in licensed cultivation facilities should confirm that canopy training and support protocols are consistent with their facility's standard operating procedures and any applicable state-level cultivation regulations.
• Material Safety: The net is constructed from elastic rubber and polyester. Operators with facility-specific material restrictions (e.g., food-safe or pharmaceutical-grade cultivation environments) should verify material compatibility with their compliance officer before deployment.
• Authorized Dealer Status: All units sold through Cannafull Spectrum Solutions are sourced through factory-authorized distribution channels. Warranty coverage is manufacturer-backed and valid for purchases made through this channel across licensed U.S. facilities.

Compliance requirements for controlled-environment cultivation vary by state and facility license type. The information provided here reflects general deployment guidance only and does not constitute legal or regulatory advice. Operators are responsible for confirming that all equipment and protocols meet the requirements of their specific license, jurisdiction, and facility operating procedures. Cannafull Spectrum Solutions makes no representations regarding the suitability of this product for any specific regulatory environment beyond the manufacturer's published specifications.