AC Infinity Black and White Panda Film | Waterproof Reflective Sheet | 10 x 10 ft.

Quick Spec: SKU: AC-PFA10  |  Dimensions: 10.00 ft. x 10.00 ft. (304.8 x 304.8 cm)  |  Thickness: 0.1 mm  |  White-Side Reflectivity: 90%  |  Material: Tensile Polymer  |  UPC: 819137023222  |  MAP: $26.99

Precision Control in Any Space

Every uncontrolled surface in a grow environment is a liability. Light that escapes a flowering zone disrupts photoperiod integrity. Light that fails to reflect off walls and floors is photon energy that never reaches the canopy — a silent, compounding loss that accumulates across every cycle. Moisture that migrates under a floor liner creates pathogen pressure in adjacent zones. These are not edge cases; they are the default failure state of facilities that rely on improvised materials, degraded reflective surfaces, or single-function barriers that were never designed to handle the simultaneous demands of light management and moisture containment. The enemy is not a single broken component — it is the accumulated cost of surfaces that do not perform their function completely.

After deployment, the operational picture changes. Flowering zones maintain strict photoperiod integrity because light cannot penetrate the black side of the film. Vegetative zones receive amplified photon distribution because the white side is actively redirecting available light back toward the canopy rather than absorbing it into a wall or floor. Floor surfaces stay dry and cleanable because the waterproof polymer layer prevents moisture from seeping through to subfloor materials. Zones that were previously separated by nothing more than proximity are now separated by a defined, functional boundary — one that handles light, moisture, and debris simultaneously.

The mechanism is a dual-sided, 0.1 mm tensile polymer sheet measuring 10.00 ft. x 10.00 ft. (304.8 x 304.8 cm). The white side delivers 90% light reflectivity, redirecting photons back into the canopy rather than losing them to surface absorption. The black side provides complete light blocking, eliminating light leakage that would otherwise compromise photoperiod-sensitive plant cycles. The polymer itself is stretchable and tear-resistant, rated for prolonged exposure without structural degradation, and the waterproof surface resists moisture migration while remaining easy to sanitize between cycles. It can be applied to walls, floors, and ceilings, and used in conjunction with peel-and-stick zippers to create light-sealed doorways in partitioned zones. In practical terms, the AC-PFA10 delivers 90% reflectivity on one surface and complete light blocking on the other across a 10 x 10 ft. deployable footprint at 0.1 mm thickness.

Where This Belongs (and Doesn't)

The AC-PFA10 is a passive environmental management material. It does not replace electrical infrastructure, HVAC systems, or active environmental controls. It is a surface-layer solution for light and moisture separation within an existing facility architecture.

How It Works

The AC-PFA10 operates on a straightforward dual-surface principle: each side of the polymer sheet performs a distinct and opposing optical function. The white side is engineered for maximum photon retention within the grow environment. At 90% reflectivity, it redirects light that would otherwise be absorbed by walls, floors, or ceilings back into the canopy, effectively increasing the photon density available to plants without increasing fixture wattage or count. This is not a passive benefit — in enclosed grow rooms where wall and floor surfaces account for a significant portion of total photon loss, a 90% reflective liner directly reduces the effective distance between the light source and the canopy by eliminating absorption dead zones at the perimeter.

The black side functions as a complete light barrier. In photoperiod-sensitive cultivation, any light intrusion during the dark cycle — regardless of intensity — can trigger stress responses that compromise yield quality and consistency. The black side of the AC-PFA10 blocks light transmission entirely, making it the appropriate surface to face outward when the film is used as a partition, enclosure wall, or blackout curtain. When used in conjunction with peel-and-stick zipper systems, the film can form a fully sealed entry point, maintaining photoperiod integrity even in high-traffic zones where operators need regular access.

The 0.1 mm tensile polymer construction is stretchable and tear-resistant, allowing the film to conform to irregular surfaces and withstand the mechanical stress of repeated installation and removal without structural failure. The waterproof surface prevents moisture from seeping through to subfloor or subwall materials, containing runoff, condensation, and irrigation overflow within the lined zone. The surface is smooth and non-porous, making sanitation between cycles a straightforward wipe-down rather than a material replacement. At 10.00 ft. x 10.00 ft. (304.8 x 304.8 cm), a single sheet covers 100 square feet of surface area, making it a scalable unit for facilities that need to line multiple rooms or partition large open spaces. In practical terms, the AC-PFA10 delivers a 90% reflective surface and a complete light-blocking surface across a 100 sq. ft. polymer sheet at 0.1 mm thickness with a waterproof, tear-resistant construction rated for prolonged environmental exposure.

Commercial Assurance

System Integration

• Lighting Systems: Deploy white-side facing inward alongside any HID, LED, or CMH fixture array to recover perimeter photon loss and increase effective PPFD at canopy level without modifying fixture output.
• Photoperiod Control: Use black-side facing outward as a partition or enclosure wall in conjunction with automated lighting timers to maintain strict dark-cycle integrity across adjacent zones operating on different schedules.
• Irrigation and Drainage: Line floors with the waterproof surface to contain runoff from drip, flood-and-drain, or hand-watering systems, directing moisture toward designated drain points and preventing subfloor saturation.
• Zipper Entry Systems: Pair with peel-and-stick zipper products to create light-sealed doorways in partitioned enclosures, maintaining blackout integrity in high-access zones without permanent structural modification.
• Multi-Zone Facilities: Use as a scalable unit — multiple sheets can be overlapped and sealed to cover larger wall, floor, or ceiling surfaces in rooms exceeding the 10 x 10 ft. single-sheet footprint.

Facility Integration Data

The following ROI framework is provided to assist procurement teams in evaluating the per-unit and fleet-scale cost of deploying the AC-PFA10 across multiple rooms or zones within a licensed facility.

Operator Field Notes

• Orientation discipline matters: White side faces inward toward the canopy for reflectivity applications; black side faces outward toward light sources or adjacent zones for blackout applications. Reversing orientation eliminates the functional benefit of each surface.
• Overlap seams at minimum 4–6 inches: When tiling multiple sheets to cover surfaces larger than 10 x 10 ft., overlap edges and tape seams with light-proof tape to prevent photon bleed at joints — particularly critical in flowering zones where any light intrusion during dark cycles is operationally unacceptable.
• Floor liner protocol: When used as a floor liner for moisture containment, run the film up the lower 6–12 inches of adjacent walls and tape the seam to prevent moisture from migrating under the film edge and into wall cavities or subfloor materials.
• Sanitation cycle: The waterproof polymer surface can be wiped down with standard facility-grade sanitizing solutions between crop cycles. Inspect seams and edges for tears or separation after each cycle and replace damaged sections before the next run.
• Zipper integration: When constructing light-sealed entry points, install peel-and-stick zippers before final taping of the film perimeter to ensure the zipper track is fully integrated into the light seal rather than applied over an existing gap.
• Tensile tolerance: The polymer is rated as stretchable and tear-resistant, but avoid stapling or puncturing the film in high-tension areas. Use adhesive mounting solutions or mechanical clips at edges to preserve the waterproof and light-blocking integrity of the sheet surface.

Operator FAQ

Shipping & Logistics

• Shipping Jurisdiction: Cannafull Spectrum Solutions ships the AC-PFA10 within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, or international addresses cannot be processed.
• Fulfillment: Orders are processed and shipped from authorized distribution points. Delivery timelines vary by destination within the contiguous 48 states. Tracking information is provided upon shipment confirmation.
• Returns: Returns are accepted in accordance with the Cannafull Spectrum Solutions Return Policy. Items must be in original, uninstalled condition to qualify for return consideration. Defective items are handled separately under manufacturer warranty procedures.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Procurement and logistics inquiries: contact Cannafull Spectrum Solutions directly via cannafullspec.com.

What's in the Box

• 1x AC Infinity Panda Film sheet — 10.00 ft. x 10.00 ft. (304.8 x 304.8 cm), dual-sided white/black polymer, 0.1 mm thickness (SKU: AC-PFA10)

Note: Peel-and-stick zippers, adhesive tape, mounting hardware, and any other installation accessories are not included and must be sourced separately. Contents confirmed from manufacturer source data. If your shipment is missing any listed item, contact Cannafull Spectrum Solutions before opening or installing the product.

Regional Compliance & Deployment Notes

• The AC-PFA10 is a passive polymer film material. It is not subject to electrical safety certification requirements (UL, ETL, or equivalent) and does not require licensed electrical installation.
• Operators deploying the AC-PFA10 in licensed cultivation facilities should verify that its use as a wall, floor, or ceiling liner complies with applicable state and local fire codes, building codes, and facility licensing requirements. Material specifications (0.1 mm polymer, non-fire-rated) should be reviewed against any facility construction standards that govern interior surface materials.
• The AC-PFA10 is not rated as a fire-retardant or fire-resistant material. Do not use in applications where fire-rated wall assemblies or interior surface materials are required by code.
• Cannafull Spectrum Solutions ships and supports the AC-PFA10 exclusively within the contiguous 48 United States. Compliance with state-specific licensed facility regulations — including those governing interior construction materials in cultivation spaces — is the responsibility of the purchasing operator.
• No Canadian compliance certifications (CSA, Health Canada) are applicable to this product as sold through Cannafull Spectrum Solutions. This product is not offered for sale or deployment in Canadian jurisdictions through this channel.

Compliance determinations for specific facility types, jurisdictions, or licensing categories are the sole responsibility of the purchasing operator. Cannafull Spectrum Solutions provides product specifications as documented by the manufacturer and does not provide legal, regulatory, or licensing advice. Verify all material compliance requirements with your state licensing authority and facility compliance officer before deployment.