AC Infinity Air Filtration Kit PRO 6" | Inline Fan with Smart Controller | Carbon Filter & Ducting Combo

Quick Spec: 402 CFM | 34 dBA | 70W Max / 38W Avg | 0.94A | 100–240V AC | IP44 | 67,000-Hr L10 Life | 1200+ IAV Carbon | 25 ft Ducting Included | UIS™ Platform Compatible

Precision Control in Any Space

Every enclosed cultivation environment has the same silent adversary: the gap between what your equipment is doing and what your environment actually needs. Manual fan controllers hold a fixed speed while temperature climbs past setpoint. Carbon filters sized for peak airflow choke down at partial load, leaving odor molecules in circulation. Ducting runs that weren't engineered together create back-pressure that robs your fan of the CFM it was rated to deliver. None of these failures announce themselves — they accumulate quietly as inconsistent results, cycle-to-cycle variance, and the persistent sense that your environment is working against you rather than for you.

After deployment, the picture changes structurally. The controller reads your space continuously, adjusting fan output in real time so temperature and humidity track their targets rather than oscillate around them. Odor is contained at the source — not managed after the fact — because the carbon filter and fan are matched components operating as a single system. Scheduling, ramp curves, and alarm thresholds are set once through the app and then executed automatically, removing the manual touchpoints that introduce variance. The environment stabilizes, and it stays stable without requiring your attention every time conditions shift.

The mechanism behind that stability is a PWM-controlled EC motor running a mixed-flow fan design with stator blades and hydrodynamic wind circles — an architecture that delivers 402 CFM at a measured 34 dBA while drawing only 38W on average (70W max) at 0.94A on 100–240V AC. The CONTROLLER AI+ pairs directly with the CLOUDLINE T-Series fan, observing environmental conditions, analyzing previous cycle data, and adjusting output to avoid the overshoot and undershoot that fixed-speed controllers cannot correct. The carbon filter carries a 1200+ IAV rating using premium Australian charcoal in a 60mm bed, rated for up to 410 CFM — matched to the fan's output so neither component is the bottleneck. Dual ball bearings support an L10 life expectancy of 67,000 hours, and IP44 sealing protects the motor from dust and splashing liquids across the full operating range of 0 to 140°F and 35 to 85% RH. In practical terms, the Air Filtration Kit PRO 6" delivers 402 CFM of filtered, controlled airflow through a 6" ducted system at an average draw of 38W, managed autonomously by an AI+ controller integrated into the UIS™ platform.

Where This Belongs (and Doesn't)

Disclaimer: This kit handles ventilation airflow management within an enclosed cultivation environment. It does not replace dedicated HVAC systems, dehumidifiers, or electrical panel upgrades. Ensure your facility's electrical circuit is rated for the connected load before installation. Consult a licensed electrician for any hardwired or high-amperage installations.

How It Works

The CLOUDLINE T6 inline fan at the core of this kit uses a mixed-flow design — stator blades and hydrodynamic wind circles working together to move air efficiently across the full speed range without the turbulence and noise penalties of axial-only designs. The PWM-controlled EC motor enables smooth speed modulation at low RPM without generating additional heat or acoustic output, which matters in enclosed environments where every watt of waste heat is a thermal load the system then has to remove. At maximum speed, the fan reaches 2800 RPM and delivers 402 CFM against a static pressure rating of 394 Pa — sufficient to overcome the resistance of the included carbon filter and 25 feet of flexible ducting without derating below usable output. Dual ball bearings extend the L10 life expectancy to 67,000 hours, and IP44 sealing protects the motor housing against dust ingress and liquid splash across an operating temperature range of 0 to 140°F.

The CONTROLLER AI+ is not a programmable timer with a temperature input — it is an adaptive control layer that observes your environment, pairs with the fan's EC motor via the UIS™ platform, and makes continuous output adjustments to maintain setpoint stability. The AI learning capability analyzes previous cycle results to avoid the overshoot and undershoot patterns that fixed-speed and simple on/off controllers produce. Through the AC Infinity app, operators can select between two AI input modes: quick AI-generated presets that adjust automatically, or fine-tuned manual parameters for operators who want to define their own ramp curves and alarm thresholds. The controller cord to the fan measures 72 inches (6 feet), and the cord to the plug is also 72 inches (6 feet), providing installation flexibility without requiring extension cables in standard enclosed environments.

The carbon filter uses premium Australian charcoal at a 1200+ IAV rating with a 60mm carbon bed depth, housed in a durable steel mesh body with a powder-coated gunmetal finish that resists rust and corrosion. The filter is rated for a maximum airflow of 410 CFM — deliberately matched above the fan's 402 CFM output so the filter is never the system's limiting factor. The reversible aluminum flange (1.57 in. / 4.0 cm length) accepts the 6" ducting connection in either orientation, and two pre-filter cloths are included to block particulate before it reaches the carbon bed, extending service intervals. The 25-foot flexible ducting features a four-layer construction — PVC thermoplastic outer layer over aluminum foil inner material — providing structural integrity and airflow direction across the full run length. In practical terms, the Air Filtration Kit PRO 6" moves 402 CFM through a matched 1200+ IAV carbon filter and 25 feet of 6" ducting at an average power draw of 38W, controlled autonomously by an AI+ adaptive controller operating on 100–240V AC at 0.94A.

Commercial Assurance

System Integration

• UIS™ Platform Compatibility: The CONTROLLER AI+ integrates natively with the full UIS™ ecosystem, enabling coordinated control across multiple grow devices — fans, humidifiers, heaters, and lighting — from a single app interface.
• AC Infinity App: Remote monitoring, AI preset selection, custom scheduling, alarm configuration, and access to grow guides, recipes, and video tutorials are available through the AC Infinity app on iOS and Android.
• Electrical Compatibility: Universal voltage input (100–240V AC, 50/60Hz) with US Plug (NEMA 1-15 Type-A) allows deployment across standard North American circuits without voltage conversion hardware.
• Ducting Interface: 6" duct connections on both fan and filter accept standard 6" flexible ducting and rigid duct fittings, compatible with common inline duct splitters, dampers, and booster configurations.
• Mounting Flexibility: The fan unit can be mounted vertically, horizontally, or inverted (per MANUAL_PDF), accommodating varied enclosure geometries without requiring additional mounting hardware beyond the included rope clip hangers and hanging straps.

Facility Integration Data

The following ROI reference data is provided to assist procurement and operations teams in projecting electrical cost and fleet investment across multi-unit deployments. All figures use the average power draw of 38W per unit and a reference electricity rate of $0.12/kWh operating 18 hours per day, 365 days per year. Adjust the rate and daily runtime to match your facility's utility contract and photoperiod schedule.

Operator Field Notes

• Pre-filter maintenance interval: Two pre-filter cloths are included. Inspect and clean or replace pre-filter cloths on a regular schedule — particulate loading on the pre-filter directly affects carbon bed service life and system static pressure.
• Ducting run length and back-pressure: The included 25-foot flexible ducting is rated for the fan's output, but every bend and restriction adds static pressure. Keep duct runs as straight and short as practical; the fan's 394 Pa static pressure rating provides headroom, but it is not unlimited.
• Controller cord placement: Both the fan-to-controller cord and the controller-to-plug cord are 72 inches (6 feet). Plan your mounting position to keep the controller accessible for app pairing and within cord reach of a standard outlet — no extension cord should be required in most standard enclosure configurations.
• AI learning period: The CONTROLLER AI+ improves its output calibration over time by analyzing previous cycle data. Allow the system to run through multiple environmental cycles before evaluating its setpoint accuracy — early cycles may show wider variance than steady-state operation.
• Mounting orientation: The fan unit is rated for vertical, horizontal, and inverted mounting per manufacturer manual documentation. Confirm your mounting hardware (included rope clip hangers and hanging straps) is rated for the installation orientation and load before finalizing placement.
• Carbon filter airflow margin: The carbon filter is rated for 410 CFM maximum — 8 CFM above the fan's 402 CFM output. This margin is intentional and ensures the filter is never the system's flow restriction under normal operating conditions.

Operator FAQ

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, and international destinations cannot be processed at this time.
• Fulfillment: Orders are processed and shipped from authorized distribution points. Tracking information is provided via email upon shipment confirmation. Delivery timelines vary by destination and carrier availability.
• Returns: Returns are accepted in accordance with the Cannafull Spectrum Solutions Return Policy. Items must be in original, factory-sealed condition unless defective. Contact support before initiating any return shipment.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about your order? Contact Cannafull Spectrum Solutions at cannafullspec.com or reach our support team directly before placing your order if you have pre-purchase technical questions.

What's in the Box

• CLOUDLINE T6 Inline Fan (T-Series, 6", 402 CFM)
• CONTROLLER AI+ (with 72-inch cord to fan, 72-inch cord to plug)
• Carbon Filter — RC412, 6" duct opening, 15.94 x 8.93 in. (40.5 x 22.7 cm), 1200+ IAV Australian charcoal, 60mm carbon bed, reversible aluminum flange
• Flexible Ducting — 6 in. diameter, 300 in. (25 ft) length, four-layer construction (PVC thermoplastic outer / aluminum foil inner)
• Duct clamps
• Pre-filter cloths (2 included)
• Rope clip hangers
• Hanging straps

Note: Box contents confirmed from manufacturer product page and manual documentation for SKU AC-FKT6. Cannafull Spectrum Solutions ships factory-sealed units. If your shipment is missing any listed component, contact our support team immediately upon receipt. Do not discard original packaging until all components have been verified.

Regional Compliance & Deployment Notes

• Certifications: The AC Infinity Air Filtration Kit PRO 6" carries CE and RoHS certifications. The fan motor housing is rated IP44 for dust and splash resistance.
• Electrical Standard: The kit ships with a US Plug (NEMA 1-15 Type-A) and is designed for deployment on 100–240V AC, 50/60Hz circuits within the contiguous United States. Verify that your facility's circuit is rated for the connected load (0.94A max) before installation.
• State and Local Regulations: Odor control and ventilation requirements for licensed cultivation facilities vary by state and local jurisdiction. Operators are responsible for verifying that their ventilation configuration meets applicable regulatory standards in their jurisdiction. This product description does not constitute compliance guidance.
• Shipping Jurisdiction: Available for deployment across licensed U.S. facilities in the contiguous 48 states. Cannafull Spectrum Solutions does not ship to Canadian provinces, U.S. territories, or international destinations.
• Warranty Documentation: Warranty terms for SKU AC-FKT6 are not specified in available manufacturer source data at time of publication. Contact Cannafull Spectrum Solutions for current warranty terms before placing your order.

Compliance information is provided for reference only and reflects manufacturer certification data available at time of publication. Regulatory requirements for licensed cultivation facilities vary by state and local jurisdiction. Cannafull Spectrum Solutions makes no representation that this product satisfies any specific state licensing, building code, or environmental compliance requirement. Operators are solely responsible for verifying compliance with all applicable laws and regulations in their jurisdiction prior to installation and operation.