AC Infinity Advance Grow Tent System Compact 2x2 | 1-Plant Kit | WiFi-Integrated Controls to Automate Ventilation | Circulation

Precision Control in Any Space

The enemy is guesswork — and in a sealed environment, guesswork compounds silently. A fan running at the wrong speed creates a vapor pressure deficit that no manual adjustment catches in time. A controller that can't read temperature and humidity simultaneously leaves the operator reacting to symptoms rather than managing conditions. Equipment that operates in isolation — a fan here, a timer there, a probe that only reports — creates dead zones between data and action. Every hour those dead zones persist, atmospheric consistency degrades, and the gap between potential output and actual output widens without a single visible warning sign.

After deployment, the environment inside the 2x2 footprint operates on a closed feedback loop. The Controller 69 Cortex reads temperature, humidity, and VPD simultaneously through its built-in sensor and up to two additional corded probes, then issues automated commands to the inline fan and clip fan without operator intervention. Scheduling runs on programmed logic. Atmospheric deviations trigger corrective fan speed adjustments before conditions drift outside the target window. The operator monitors — the system executes.

The mechanism behind that outcome is a purpose-matched component stack. The CLOUDLINE LITE 4-inch inline fan delivers 165 CFM at a maximum of 29 dBA, drawing 35 W peak and 18 W average at 0.55 A, rated to 67,000 L10 hours on dual ball bearings, with a static pressure ceiling of 324 Pa — sufficient to drive air through carbon filtration in a sealed 2x2 without fan stall. The 6.5-inch clip fan circulates 325 CFM across the canopy at 25 Pa static pressure with a 90-degree rotation range and an identical 67,000-hour L10 bearing life. The Controller 69 UIS platform manages up to 8 devices natively (32 with splitters), operates on 100–240 V AC, connects via Wi-Fi and Bluetooth, and presents a 4.5-inch capacitive touch display with a 12-foot corded sensor probe for remote zone monitoring. The tent structure itself provides four 4-inch and three 6-inch duct openings, a 9.84 x 23.62-inch viewing window, a 5.90 x 14.17-inch side intake window, and 22 mm steel poles rated to 250 lb beam load. In practical terms, the AI Grow Tent System Compact 2x2 delivers automated atmospheric control across a 23.62 x 23.62 x 47.24-inch enclosed footprint with a 165 CFM ventilation capacity and a multi-sensor UIS controller operating at 100–240 V AC.

Where This Belongs (and Doesn't)

Electrical and HVAC infrastructure requirements are the responsibility of the installing operator. Verify that the installation circuit meets the voltage and amperage requirements of all connected devices before deployment. Consult a licensed electrician for any hardwired integration. This system is designed for use within the contiguous United States on standard 100–240 V AC circuits.

How It Works

The AI Grow Tent System Compact 2x2 operates as a closed-loop atmospheric control ecosystem. The Controller 69 serves as the Cortex of the system — a UIS Multi-Device Controller with a built-in temperature and humidity sensor, a 4.5-inch capacitive touch display, and a 12-foot corded external sensor probe that can be positioned independently within the canopy zone. It manages up to 8 UIS-connected devices natively, expandable to 32 with splitters, and communicates with the operator via Wi-Fi and Bluetooth app control. Operating voltage is 100–240 V AC at 2 W controller draw, with physical dimensions of 5.8 x 3.42 x 0.94 inches (14.9 x 8.7 x 2.4 cm).

Ventilation is handled by the CLOUDLINE LITE 4-inch inline fan. It moves 165 CFM at a peak of 2,800 RPM, generates no more than 29 dBA of acoustic output, and sustains 324 Pa of static pressure — the threshold required to maintain airflow through resistance-loaded ducting in a sealed enclosure. Max power draw is 35 W; average operating draw is 18 W at 0.55 A on a NEMA 1-15 Type-A connector. The fan accepts 100–240 V AC at 50/60 Hz, operates within 35–85% RH and 32–140°F, carries IP-44 ingress protection, and is rated to 67,000 L10 hours on dual ball bearings. Cord length to the controller is 10 feet; cord length to the plug is 8 feet. The fan supports both horizontal and vertical mounting positions. CE and RoHS certifications are confirmed.

Canopy-level air movement is delivered by the 6.5-inch clip fan. It circulates 325 CFM at 25 Pa static pressure across a 90-degree rotation range, drawing 0.15 A on a 100–240 V AC supply. Bearing construction is dual ball, rated to 67,000 L10 hours, with IP-44 ingress protection. Physical dimensions are 8.74 x 10.47 inches (22.2 x 26.6 cm).

The tent enclosure is constructed from Oxford outer material with a Mylar interior lining for maximum photon retention. The steel pole frame uses 22 mm diameter poles with a 250 lb beam weight capacity. Interior dimensions are 23.62 x 23.62 x 47.24 inches (60 x 60 x 120 cm). Duct openings include four 4-inch and three 6-inch ports. The viewing window measures 9.84 x 23.62 inches (25 x 60 cm); the side intake window measures 5.90 x 14.17 inches (15 x 36 cm). Two primary hanging bars plus one extra are included. The kit is configured for 1 plant in a 5-gallon container. In practical terms, the AI Grow Tent System Compact 2x2 delivers a 165 CFM ventilation capacity, 325 CFM canopy circulation, and multi-sensor automated atmospheric control across a 60 x 60 x 120 cm sealed enclosure operating on 100–240 V AC.

Commercial Assurance

• Authorized Distribution: Cannafull Spectrum Solutions is a factory-authorized dealer. All units are sourced through verified supply channels and carry full manufacturer support eligibility.
• Warranty: Warranty terms are governed by the manufacturer's current policy. No warranty period is specified in available source data — contact Cannafull Spectrum Solutions at support@cannafullspec.com to confirm current warranty coverage before purchase.
• Certifications: CLOUDLINE LITE 4-inch inline fan carries CE and RoHS certification. Clip fan and Controller 69 carry IP-44 ingress protection rating. Verify compliance requirements with your jurisdiction's licensing authority.
• Component Longevity: Inline fan and clip fan both rated to 67,000 L10 hours on dual ball bearings — equivalent to approximately 7.6 years of continuous operation at rated load.
• Voltage Compatibility: All active components (inline fan, clip fan, Controller 69) accept 100–240 V AC, confirming compatibility with standard U.S. facility electrical infrastructure.

System Integration

• UIS Ecosystem Expansion: The Controller 69 UIS port architecture supports up to 8 directly connected devices and scales to 32 devices with UIS splitters — enabling the AI-2x2-1P to serve as a node within a larger multi-tent facility network without requiring a separate controller per enclosure.
• Remote Monitoring: Wi-Fi and Bluetooth app connectivity allows operators to monitor and adjust temperature, humidity, and VPD setpoints remotely, reducing the need for physical access to the enclosure during active production cycles.
• Sensor Architecture: The Controller 69 supports 3 total sensors — 1 built-in temperature and humidity sensor plus 2 additional corded probes — enabling zone-differentiated atmospheric data collection within or adjacent to the 2x2 footprint.
• Duct Compatibility: Four 4-inch and three 6-inch duct openings provide routing flexibility for carbon filter integration, passive intake, or cross-tent ducting in multi-unit deployments.
• Structural Load Capacity: The 250 lb beam weight capacity on 22 mm steel poles accommodates supplemental lighting, CO2 distribution hardware, or additional environmental sensors without structural compromise.

Facility Integration Data

The following ROI reference data is provided to assist procurement and operations teams in evaluating fleet-scale deployment of the AI-2x2-1P at the MAP price of $499 per unit. All figures are based on unit cost only; installation labor, consumables, and facility overhead are excluded.

Controller node counts are estimates based on 8-device native capacity and 32-device splitter-expanded capacity of the Controller 69. Actual device counts per tent will vary based on connected peripheral configuration. Contact Cannafull Spectrum Solutions for fleet pricing inquiries.

Operator Field Notes

• Duct Port Planning: The tent provides four 4-inch and three 6-inch duct openings. Map your intake, exhaust, and carbon filter routing before assembly — unused ports should be sealed to maintain negative pressure integrity.
• Sensor Probe Placement: The Controller 69's 12-foot corded sensor probe allows placement at canopy level independent of the controller's mounting position. Position the probe at the midpoint of the canopy, not at the tent ceiling, for accurate VPD readings.
• Fan Speed Scheduling: The CLOUDLINE LITE 4-inch fan operates at up to 2,800 RPM with a 324 Pa static pressure ceiling. If running a carbon filter in-line, verify that the filter's resistance rating does not exceed the fan's static pressure capacity at your target CFM setpoint.
• Clip Fan Positioning: The 6.5-inch clip fan's 90-degree rotation range and 325 CFM output are sufficient for stem-strengthening airflow across a single-plant canopy. Mount at mid-canopy height and angle toward the primary growth zone, not directly at the substrate surface.
• UIS Splitter Expansion: If integrating this unit into a multi-tent facility network, confirm UIS splitter compatibility with the Controller 69 before purchasing additional peripheral devices. Native capacity is 8 devices; splitter-expanded capacity is 32.
• Structural Load: The 250 lb beam capacity on 22 mm steel poles is rated for the hanging bar assembly. Distribute supplemental hardware loads across multiple hang points rather than concentrating weight on a single bar.

Operator FAQ

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this territory cannot be fulfilled.
• Processing: Orders are processed in the order received. Estimated lead times will be confirmed at checkout or via direct inquiry. Freight and oversized shipping surcharges may apply to multi-unit fleet orders — contact us before placing large-quantity orders.
• Returns: Returns are accepted for defective units per the manufacturer's warranty terms. Non-defective returns are subject to our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions? Contact Cannafull Spectrum Solutions at support@cannafullspec.com or visit cannafullspec.com for current inventory and fleet pricing.

What's in the Box

The following components are confirmed as included in the AI Grow Tent System Compact 2x2 (SKU: AI-2x2-1P) based on available source data:

• AI Grow Tent enclosure — 23.62 x 23.62 x 47.24 in (60 x 60 x 120 cm), Oxford outer shell, Mylar interior lining, 22 mm steel pole frame
• CLOUDLINE LITE 4-inch inline fan (SKU: CLOUDLINE-LITE-4) — 165 CFM, 29 dBA, 324 Pa, dual ball bearing, IP-44, CE/RoHS certified
• 6.5-inch clip fan (SKU: CLIP-FAN-6.5) — 325 CFM, 90° rotation, dual ball bearing, IP-44
• Controller 69 UIS Multi-Device Controller (SKU: CONTROLLER-69) — 4.5-inch capacitive touch display, Wi-Fi + Bluetooth, built-in temperature and humidity sensor, 12-foot corded sensor probe, 100–240 V AC
• 2 primary hanging bars + 1 extra hanging bar

Note: Accessory items such as carbon filters, ducting, grow media, nutrients, and supplemental lighting are not included unless explicitly listed above. Kit contents are subject to change by the manufacturer without notice. Confirm current kit contents with Cannafull Spectrum Solutions before purchase if specific components are required for your deployment. Manual Code: PK2111X1. UPC: 819137022829.

Regional Compliance & Deployment Notes

• Distribution Territory: This product is sold and shipped exclusively within the contiguous 48 United States by Cannafull Spectrum Solutions. No international or Canadian fulfillment is available.
• Electrical Compliance: The CLOUDLINE LITE 4-inch inline fan carries CE and RoHS certification. All active components operate on 100–240 V AC, 50/60 Hz. Verify that your facility's circuit meets the amperage and connector requirements (NEMA 1-15 Type-A for the inline fan) before installation.
• Ingress Protection: The inline fan and clip fan carry IP-44 ingress protection, rated for operating environments within 35–85% RH and 32–140°F. Do not deploy in conditions exceeding these parameters.
• Licensing Compliance: Operators are solely responsible for ensuring that the use of this equipment complies with all applicable federal, state, and local regulations governing controlled substance cultivation, including but not limited to state cannabis licensing requirements. Cannafull Spectrum Solutions makes no representation regarding the legal status of cultivation activities in any jurisdiction.
• Warranty Jurisdiction: Warranty claims are processed through the manufacturer's authorized service channels. No warranty period is specified in available source data. Contact Cannafull Spectrum Solutions to confirm current warranty terms applicable to your state of operation.

Product specifications, certifications, and kit contents are subject to change by the manufacturer without notice. All data presented on this page reflects information available at the time of publication. Cannafull Spectrum Solutions is not responsible for typographical errors or specification changes made by the manufacturer after publication. Verify current specifications with Cannafull Spectrum Solutions before finalizing procurement decisions for licensed facility deployments.