AC Infinity Advance Grow Tent System 2x2 | 1-Plant Kit | WiFi-Integrated Controls to Automate Ventilation | Circulation

Quick Spec: Tent: 24" x 24" x 72" | Frame: 22 mm steel, 250 lb beam capacity | Interior: Mylar reflective lining | Outer Shell: Oxford fabric | Inline Fan: 4" CLOUDLINE LITE, 165 CFM, 29 dBA | Clip Fan: CLOUDRAY, 325 CFM, 31 dBA | Controller: CONTROLLER 69, Wi-Fi + Bluetooth, 8 devices (32 with splitters) | Light: IONBOARD 11.81 x 11.81 in. | UPC (2x2 Standard): 819137022836

Precision Control in Any Space

The enemy is guesswork — and the equipment that enables it. In compact cultivation environments, the failure mode is not dramatic; it is slow and cumulative. A fan running at a fixed speed that cannot respond to a temperature spike at canopy level. A controller that reads ambient air instead of the microclimate where it matters. A lighting fixture hung at the wrong height because there was no structured framework to position it correctly. Each of these gaps compounds across a cycle: VPD drifts outside the target window, transpiration rates shift, and the plant's metabolic output becomes a function of environmental luck rather than operator intent. The silent cost is not a single failed run — it is the inability to replicate a good one.

After deployment, the operational picture changes structurally. The enclosure becomes a defined atmospheric zone — sealed, reflective, and mechanically ventilated — where every environmental variable is addressable through a single control interface. The CONTROLLER 69 reads temperature, humidity, and VPD in real time via a 12-foot corded sensor probe positioned at canopy level, then issues automated commands to the inline fan and any connected devices. Scheduling, threshold triggers, and remote monitoring via Wi-Fi and Bluetooth eliminate the manual adjustment cycles that introduce variance between runs. The operator's role shifts from reactive troubleshooting to proactive parameter setting.

The mechanism behind that outcome is an engineered component stack, not a collection of compatible parts. The tent structure is built on 22 mm steel poles rated to 250 lbs of beam load capacity, with an Oxford outer shell and a Mylar interior lining that maximizes photon recirculation from the IONBOARD LED panel (11.81 x 11.81 in., 0.43 in. board thickness). Atmospheric exchange is handled by the CLOUDLINE LITE inline fan — 4" duct, 165 CFM maximum airflow, 29 dBA operating noise, 324 Pa static pressure, IP-44 rated, dual ball bearing construction rated to 67,000 hours L10 life expectancy, CE and RoHS certified, mountable horizontally or vertically, powered at 100-240V AC at 35W maximum / 18W average draw at 0.55A. Internal air circulation is managed by the CLOUDRAY clip fan — 6.5" impeller, 325 CFM maximum airflow, 31 dBA, 25 Pa static pressure, 90-degree rotation range, dual ball bearing construction rated to 67,000 hours life expectancy, 11W at 0.15A on 100-240V AC. The CONTROLLER 69 manages up to 8 devices natively (32 with splitters), supports 3 sensors (1 built-in onboard temperature and humidity, plus corded probes), displays on a 4.5-inch screen with capacitive touch input, and operates on 100-240V AC at 2W maximum. In practical terms, the Advance Grow Tent Kit (2x2) delivers a fully automated atmospheric control ecosystem within a 24" x 24" x 72" enclosure, with inline ventilation rated to 165 CFM and environmental orchestration across up to 32 connected devices via a single Wi-Fi and Bluetooth-enabled controller.

Where This Belongs (and Doesn't)

Electrical installation, HVAC integration, and structural mounting must comply with applicable local codes and facility requirements. Cannafull Spectrum Solutions does not provide installation services. Consult a licensed electrician or mechanical contractor for circuit load calculations and duct routing in regulated environments.

How It Works

The Advance Grow Tent Kit (2x2) operates as a closed-loop atmospheric ecosystem. The structural enclosure — 24" x 24" x 72", Oxford outer shell, Mylar interior — defines the controlled zone. The 22 mm steel pole framework supports up to 250 lbs of beam load across 3 hanging bars, providing fixed mounting positions for the IONBOARD LED panel and the CLOUDLINE LITE inline fan. The 9.84 x 39.37 in. (25.0 x 100.0 cm) viewing window allows canopy inspection without breaking the sealed environment. The 5.90 x 13.77 in. (15.0 x 35.0 cm) side intake hole provides a defined passive or active intake pathway for fresh air exchange.

Atmospheric exchange is driven by the CLOUDLINE LITE inline fan. At 4" duct diameter, it moves up to 165 CFM at a maximum static pressure of 324 Pa, operating at 29 dBA — quiet enough for occupied facility spaces. The fan runs on 100-240V AC, drawing 35W maximum / 18W average at 0.55A, and accepts a US Plug NEMA 1-15 Type-A connector operating at 50/60 Hz. IP-44 ingress protection and dual ball bearing construction rated to 67,000 hours L10 life expectancy mean the unit does not require scheduled replacement within a standard multi-year operational window. CE and RoHS certifications confirm compliance with applicable quality standards. The fan mounts horizontally or vertically, accommodating varied duct routing configurations within the enclosure.

Internal air circulation — critical for uniform canopy-level VPD and boundary layer disruption — is handled by the CLOUDRAY clip fan. Its 6.5" impeller delivers up to 325 CFM at 31 dBA, with a 90-degree rotation range enabling directional coverage across the canopy plane. Static pressure is rated at 25 Pa. Like the inline fan, the CLOUDRAY runs on 100-240V AC (11W, 0.15A) and carries a 67,000-hour life expectancy with dual ball bearing construction.

Orchestration of both fans and up to 6 additional connected devices is handled by the CONTROLLER 69. The controller's onboard sensor reads ambient temperature and humidity; the 144-inch (12-foot) corded probe sensor extends to canopy level for direct microclimate measurement. VPD is calculated in real time from these inputs and displayed on the 4.5-inch capacitive touch screen. Automated scheduling, threshold-based triggers, and remote adjustment via Wi-Fi and Bluetooth eliminate manual intervention as the primary control mechanism. The controller operates on 100-240V AC at 2W maximum, supports up to 3 sensors (1 built-in), and scales to 32 devices with splitter accessories. The IONBOARD LED panel — 11.81 x 11.81 in. (30.0 x 30.0 cm), 0.43 in. board thickness — mounts to the overhead hanging bars and delivers photon output into the Mylar-lined enclosure, with full wattage, spectrum, and PPF specifications available in the IONBOARD product documentation. In practical terms, the Advance Grow Tent Kit (2x2) integrates inline ventilation at 165 CFM, internal circulation at 325 CFM, and automated VPD-responsive control across up to 32 devices within a sealed 24" x 24" x 72" enclosure managed from a single Wi-Fi and Bluetooth-enabled interface.

System Integration

• Controller-to-Fan Integration: The CONTROLLER 69 connects directly to the CLOUDLINE LITE inline fan and CLOUDRAY clip fan, enabling automated speed adjustment based on real-time temperature, humidity, and VPD readings without manual fan intervention.
• Sensor Positioning: The 144-inch (12-foot) corded probe sensor on the CONTROLLER 69 reaches from the controller mounting position to canopy level within the 72-inch tent height, enabling measurement at the plant's active metabolic zone rather than at ambient room level.
• Scalable Device Control: The CONTROLLER 69 natively manages up to 8 devices; splitter accessories expand that capacity to 32 devices, accommodating future integration of supplemental lighting, CO2 controllers, or additional circulation equipment as the operation scales.
• Remote Monitoring: Wi-Fi and Bluetooth connectivity on the CONTROLLER 69 enables remote parameter adjustment and environmental monitoring via the AC Infinity app, reducing the need for physical access to the enclosure during active production cycles.
• Electrical Compatibility: All components in this kit — CLOUDLINE LITE, CLOUDRAY, and CONTROLLER 69 — operate on 100-240V AC, confirming compatibility with standard U.S. facility electrical infrastructure without voltage conversion.

Operator Field Notes

• Sensor Probe Placement: Position the CONTROLLER 69's 144-inch corded probe at canopy level — not at the controller's mounting height — to ensure VPD calculations reflect actual plant-zone conditions rather than ambient room readings. The 12-foot cable length accommodates this in the 72-inch tent without extension.
• Duct Routing: The CLOUDLINE LITE's 4" duct diameter and IP-44 rating support both horizontal and vertical mounting orientations. Plan duct routing before tent assembly to avoid sharp bends that reduce effective CFM below the 165 CFM rated maximum.
• Intake Sizing: The side intake hole measures 5.90 x 13.77 in. (15.0 x 35.0 cm). Passive intake at this dimension is adequate for the CLOUDLINE LITE's 165 CFM draw at moderate static pressure; if carbon filtration is added to the exhaust path, verify that intake area is sufficient to prevent negative pressure buildup that could deform the tent walls.
• Hanging Bar Load Management: The 250 lb beam weight capacity is distributed across 3 hanging bars. Distribute the IONBOARD, CLOUDLINE LITE, and any ancillary equipment across separate bars to avoid concentrating load on a single attachment point.
• CLOUDRAY Positioning: The 90-degree rotation range on the CLOUDRAY clip fan allows directional adjustment without repositioning the clip mount. Set rotation to oscillate across the canopy plane rather than directing airflow at a fixed point to avoid localized transpiration stress.
• IONBOARD Specifications: Wattage, spectrum, PPF, LED count, coverage area, and certifications for the IONBOARD are not specified in available source data. Obtain the IONBOARD product datasheet before finalizing circuit load calculations and mounting height for your specific production protocol.

Shipping & Logistics

• Shipping Jurisdiction: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, and international addresses cannot be processed.
• Freight Method: This kit ships as a multi-component assembly. Confirm delivery address accessibility for standard ground freight before placing your order. Liftgate service may be required for facilities without a loading dock — contact support@cannafullspec.com to arrange prior to checkout.
• Returns: Returns are accepted in accordance with the Cannafull Spectrum Solutions Return Policy. Items must be in original, uninstalled condition with all original packaging. Contact support@cannafullspec.com within the applicable return window to initiate a return authorization.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

For order support, freight coordination, or pre-purchase technical questions: support@cannafullspec.com

What's in the Box

The following components are confirmed as included in the Advance Grow Tent Kit (2x2) — SKU AC-PKB22 — based on available source data:

• Advance Grow Tent (2x2) — 24" x 24" x 72", Oxford outer shell, Mylar interior, 22 mm steel pole framework, 3 hanging bars, 250 lb beam weight capacity (Manual Code: PK2111X1)
• CLOUDLINE LITE Inline Fan — 4" duct, 165 CFM, 29 dBA, 324 Pa, IP-44, dual ball bearing, 67,000-hour L10 life expectancy, CE/RoHS certified, 100-240V AC, US Plug NEMA 1-15 Type-A
• CLOUDRAY Clip Fan — 6.5" impeller, 325 CFM, 31 dBA, 25 Pa, 90-degree rotation, dual ball bearing, 67,000-hour life expectancy, 100-240V AC, IP-44
• CONTROLLER 69 — Temperature/Humidity/VPD controller, 4.5-inch display, capacitive touch, Wi-Fi + Bluetooth, 8 devices native (32 with splitters), 3 sensors (1 built-in), 144-inch corded probe, 100-240V AC
• IONBOARD LED Grow Light — 11.81 x 11.81 in. (30.0 x 30.0 cm), 0.43 in. board thickness (full wattage and spectrum specifications not available in source data — refer to IONBOARD product documentation)

Note: Accessory items such as splitters, additional sensor probes, ducting, carbon filters, and hangers are not confirmed as included in this kit. Verify complete box contents against the packing list included with shipment. If any component is missing or damaged upon receipt, contact support@cannafullspec.com before installation.

Regional Compliance & Deployment Notes

• Electrical Code Compliance: All electrical connections, circuit loading, and outlet configurations must comply with the National Electrical Code (NEC) and applicable state and local amendments. The CLOUDLINE LITE operates on 100-240V AC at 35W maximum / 0.55A; the CLOUDRAY operates at 11W / 0.15A; the CONTROLLER 69 operates at 2W maximum. IONBOARD wattage is not specified in source data — confirm before circuit sizing.
• Licensing Jurisdiction: Cultivation licensing requirements, canopy size restrictions, and facility compliance standards vary by state and municipality. Confirm that the deployment of this system is consistent with your current license tier and canopy allocation before installation.
• IP Rating Application: The CLOUDLINE LITE and CLOUDRAY are both rated IP-44. This rating provides protection against solid particle ingress greater than 1 mm and water splash from any direction. It does not provide protection against sustained water immersion or high-pressure water jets. Verify that the operating environment does not exceed IP-44 exposure conditions.
• Certification Verification: The CLOUDLINE LITE carries CE and RoHS certifications. The CONTROLLER 69 and IONBOARD certification status is not fully specified in available source data. Facilities with procurement requirements for UL, ETL, or other specific certifications should verify component certification status directly with AC Infinity before ordering.
• Shipping Jurisdiction: This product is available for shipment within the contiguous 48 United States only through Cannafull Spectrum Solutions. Compliance with state-specific import, transport, and cultivation equipment regulations is the responsibility of the purchasing operator.

Cannafull Spectrum Solutions provides this compliance information as a reference summary only. It does not constitute legal, regulatory, or engineering advice. Operators are responsible for confirming all applicable federal, state, and local requirements governing cultivation equipment deployment in their jurisdiction. Specifications are subject to change by the manufacturer without notice — confirm current specifications with Cannafull Spectrum Solutions prior to procurement decisions.