AC Infinity CLOUDRAY S6 | Grow Tent Clip Fan 6” with 10 Speeds | EC-Motor | Auto Oscillation

Precision Control in Any Space

Every enclosed cultivation environment has the same silent adversary: stagnant air that pools at the canopy, creates thermal gradients, and leaves entire zones without adequate CO2 replenishment or transpiration support. The equipment operators typically deploy against this problem makes it worse — fixed-speed fans that run at full blast or not at all, clamps that slip under load, and zero integration with the environmental controllers already managing the room. The result is a circulation layer that operates completely outside the facility's control architecture, introducing variance that compounds across every cycle.

After deploying the CLOUDRAY S6, the circulation layer stops being a liability and becomes a managed variable. Airflow speed adjusts automatically in response to temperature and humidity triggers. Oscillation sweeps the canopy on a programmed schedule rather than running continuously and degrading motor life. The fan mounts flush to the frame, reclaims vertical clearance, and holds position under continuous operation — delivering consistent atmospheric movement without requiring manual intervention between cycles.

The mechanism behind that outcome is an EC motor platform drawing 11W at 0.14A across a 100–240V AC input range, producing 325 CFM of airflow at a measured 31 dBA noise floor. Ten discrete speed levels, ten dynamic wind modes, and ten oscillation angle settings across a 90° sweep give operators 1,000 addressable airflow states from a single unit. IP-54 ingress protection seals the motor housing against the moisture and particulate loads common in high-humidity cultivation environments. Dual ball bearings support a 67,000-hour rated service life, and the UIS-compatible control interface allows the fan to receive commands from AC Infinity controllers via temperature, humidity, timer, cycle, and schedule programming — or remotely through the AC Infinity app with compatible controllers. In practical terms, the CLOUDRAY S6 delivers 325 CFM at 31 dBA across a 6-inch airflow path at 11W continuous draw, fully addressable within the UIS control ecosystem.

Where This Belongs (and Doesn't)

The CLOUDRAY S6 is a low-voltage circulation fan rated for enclosed cultivation environments. It is not a substitute for ducted exhaust ventilation, HVAC supply air, or CO2 injection distribution. Electrical installation must comply with applicable local codes. Consult a licensed electrician for any hardwired or multi-circuit deployment.

How It Works

The CLOUDRAY S6 is built around an EC (electronically commutated) motor, a motor architecture that uses digital pulse-width modulation to control rotational speed with precision that brushed or standard AC induction motors cannot match. EC motors respond to control signals in discrete, repeatable increments — which is why the CLOUDRAY S6 can hold any of its 10 speed levels consistently rather than drifting under load. The motor draws 11W at 0.14A from a 100–240V AC supply, making it compatible with standard North American electrical infrastructure without a transformer or voltage converter.

Airflow output is rated at 325 CFM with a static pressure capacity of 25 Pa — sufficient to push air through the resistance of dense canopy foliage at close mounting distances. The 6-inch blade assembly operates at a measured 31 dBA, a noise floor that does not interfere with environmental sensor readings or require acoustic mitigation in operator-occupied spaces. The oscillation system provides 10 discrete angle settings across a 90° sweep range. When connected to a UIS controller, oscillation start and stop events are triggered automatically by the external program — eliminating the need for manual intervention to match airflow patterns to photoperiod or environmental state changes. Manual oscillation activation is also available via the dedicated oscillation button on the unit itself.

The mounting system uses a heavy-duty metal clamp engineered to grip poles of varying diameters across standard tent frame configurations. The motor base is designed with a shallower profile than conventional clip fans, allowing the unit to mount closer to the frame and preserve usable canopy clearance. The fan body measures 9.73 x 11.82 in. (24.7 x 30.0 cm) and ships with a 96-inch (8-foot) power cord, providing reach to outlet positions without extension cord dependency in standard tent configurations. Dual ball bearings support the rated 67,000-hour service life, and the IP-54 housing seals the motor against moisture ingress and particulate contamination at the humidity levels common in active cultivation environments. In practical terms, the CLOUDRAY S6 delivers 325 CFM at 31 dBA with a 67,000-hour rated motor life, fully addressable across 10 speeds, 10 dynamic wind modes, and 10 oscillation settings via UIS controller or AC Infinity app.

Commercial Assurance

• Warranty: 2-year manufacturer warranty covering defects in materials and workmanship, applicable to all CLOUDRAY S6 variants (single unit and 2-Pack).
• Returns: 30-day free returns policy applies to all models. Review full terms at cannafullspec.com/pages/return-policy before ordering.
• Authorized Channel: Cannafull Spectrum Solutions is a factory-authorized dealer. All units are sourced through verified distribution channels and carry full manufacturer warranty support.
• IP Rating: IP-54 rated per product page specification. IP44 rating noted in manufacturer manual documentation. Both ratings confirm sealed motor protection against moisture and dust ingress under cultivation operating conditions.
• Rated Service Life: 67,000 hours continuous operation (motor); oscillation duty rated at maximum 18 hours on / 6 hours off per 24-hour cycle to preserve motor lifespan.

System Integration

• UIS Ecosystem Compatibility: Connects directly to AC Infinity UIS controller hubs for automated speed, oscillation, temperature-triggered response, humidity-triggered response, timer, cycle, and schedule programming — no additional adapters required.
• AC Infinity App Control: With a compatible UIS controller, the CLOUDRAY S6 is addressable remotely via the AC Infinity app, enabling schedule adjustments and real-time speed changes without physical access to the unit.
• PWM Digital Control: EC motor architecture accepts PWM control signals across 10 discrete speed settings (0–10), ensuring repeatable airflow output at each programmed level without analog drift.
• Dual Mounting Orientation: Horizontal and vertical mounting positions supported, allowing the unit to integrate into multi-tier rack configurations or standard tent pole layouts without additional hardware.
• Universal Voltage Input: 100–240V AC operating range provides compatibility with standard U.S. electrical infrastructure across all licensed facility configurations.

Facility Integration Data

The following ROI reference data is provided to support procurement planning for multi-unit deployments. All figures are based on published electrical specifications (11W per unit) and standard U.S. commercial electricity rates ($0.12/kWh). Actual operational costs will vary by facility rate schedule and duty cycle.

Operator Field Notes

• Oscillation Duty Cycle: The manufacturer rates oscillation at a maximum of 18 hours on / 6 hours off per 24-hour period. Running oscillation continuously beyond this threshold accelerates motor wear and will shorten service life below the rated 67,000 hours. Program oscillation rest periods into your UIS schedule at deployment.
• Clamp Diameter Compatibility: The heavy-duty metal clamp is rated to grip poles of any thickness found in standard tent frame configurations. Verify clamp engagement before leaving the unit unattended — a loose clamp under vibration load is the primary cause of repositioning events in continuous-run deployments.
• Mounting Orientation: Both horizontal and vertical mounting positions are supported. Vertical mounting is effective for targeting airflow at specific canopy tiers in multi-level configurations. Confirm the cord route does not create a tension point on the clamp when mounted vertically.
• IP Rating Field Note: The product page lists IP-54; the manufacturer manual documents IP44. Both ratings confirm sealed protection against moisture and dust under standard cultivation humidity levels. For environments consistently operating above 80% RH, confirm the mounting position does not direct condensation runoff toward the motor housing.
• Cord Management: The 96-inch (8-foot) power cord provides adequate reach in most standard tent configurations without extension cord use. Route the cord along the tent frame and secure it to prevent it from contacting the canopy or creating a trip hazard at the base of the tent.
• 2-Pack Procurement: The 2-Pack variant (SKU: AC-CCS6) is the same physical unit with identical specifications. At $119.00 for two units versus $59.99 per single unit, the 2-Pack represents a $0.98 per-unit reduction. For facilities deploying four or more units, procuring in 2-Pack increments reduces per-unit cost at no specification trade-off.

Operator FAQ

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, and international destinations cannot be fulfilled through this channel.
• Fulfillment: Orders are processed and shipped from U.S. distribution. Tracking information is provided at time of shipment. Delivery timelines vary by destination and carrier availability.
• Returns: 30-day free returns policy applies to all CLOUDRAY S6 models. Items must be returned in original condition. Initiate returns through cannafullspec.com/pages/return-policy.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about your order? Contact Cannafull Spectrum Solutions directly through cannafullspec.com before initiating a return or exchange.

What's in the Box

• 1x AC Infinity CLOUDRAY S6 6-inch clip fan (or 2x units for 2-Pack variant)
• Heavy-duty metal clamp assembly (pre-attached)
• 96-inch (8-foot) power cord
• Manufacturer documentation and warranty registration information

Box contents are based on manufacturer documentation available at time of publication. Cannafull Spectrum Solutions ships factory-sealed units. If your shipment is missing any component, contact us before opening a return — manufacturer warranty support can resolve component issues directly in most cases.

Regional Compliance & Deployment Notes

• Electrical Compliance: The CLOUDRAY S6 operates on 100–240V AC at 0.14A (11W). Verify that the outlet circuit serving the unit is rated for the load, particularly in multi-unit deployments where several fans share a single circuit. Consult a licensed electrician for any installation involving dedicated circuits or panel modifications.
• State Licensing: This product is sold as cultivation infrastructure equipment. Operators are responsible for ensuring their facility holds all applicable state and local licenses required for the cultivation activity in which this equipment is deployed. Cannafull Spectrum Solutions does not provide licensing guidance.
• Operating Environment Limits: The CLOUDRAY S6 is rated for operating temperatures of 32–140°F and relative humidity of 35–85% RH. Deployment in environments outside these parameters voids the manufacturer warranty and may create safety hazards.
• UL / Certification Status: Certification status beyond IP-54 ingress protection is not specified in manufacturer source data. Operators in jurisdictions requiring specific electrical safety certifications (e.g., UL listing) for cultivation equipment should verify certification status directly with AC Infinity prior to procurement.
• Shipping Jurisdiction: Available for deployment across licensed U.S. facilities within the contiguous 48 states. Cannafull Spectrum Solutions does not ship to Canadian provinces or international destinations.

Compliance requirements vary by state and municipality. The information provided here is for general reference only and does not constitute legal or regulatory advice. Operators are responsible for verifying all applicable requirements with their state regulatory authority prior to deployment.