AC Infinity IONBEAM U2 | Targeted Spectrum UV LED Grow Light Bars | 2-Bar Kit | 11-Inch

Key Specs: 24W | 365nm + 395nm UV | 2x2 / 2x4 / 3x3 Coverage | 0.06A | 3.2 lb | 2-Year Warranty

Stop Buying. Start Manufacturing Top-Shelf Inventory.

Consumer-grade equipment and guesswork-driven growing impose a cost that never appears on a single invoice — it accumulates in the gap between what your canopy could express and what it actually delivers. Without targeted UV input during the fruit and flower window, secondary metabolite development is left to chance. Terpene profiles flatten. Resin density underperforms. The facility runs, the lights run, and the harvest still comes in below its genetic ceiling — not because of a single failure, but because a critical environmental variable was never controlled in the first place. That silent shortfall is the real overhead.

After deploying the IONBEAM U2, the UV window is no longer a variable — it is a scheduled, repeatable event. Operators set intensity across ten discrete brightness levels, program ON/SCHEDULE/OFF modes through the integrated Dimming Schedule Controller, and walk away knowing that every flowering cycle receives the same UV dose at the same phase. The canopy stops being a guess and starts being a production input. Quality becomes a function of process, not luck.

The mechanism is a two-bar array of Samsung LM301H EVO diodes — 12 diodes per bar — emitting at 365nm and 395nm across the targeted UV spectrum. The IP65-rated unibody aluminum housing mounts magnetically onto grow tent frames, bar-style fixtures, and canvas structures using the included steel bars, requiring no permanent electrical modification. The controller operates on 100–240V AC at 50/60 Hz, drawing 0.06A from a standard NEMA 1-15 Type-A outlet, and integrates with the UIS platform for smart program and app-based control. In practical terms, the IONBEAM U2 delivers 365nm and 395nm UV coverage across 2x2, 2x4, and 3x3 footprints at 24W and 0.06A draw from a standard household circuit.

Where This Belongs (and Doesn't)

Not recommended for circuits under ~0.2A @120V or ~0.1A @240V per fixture, or unsealed rooms lacking HVAC capacity for expected thermal load.

The IONBEAM U2 draws 0.06A at 100–240V AC from a NEMA 1-15 Type-A outlet. No dedicated circuit is required, but verify that the outlet circuit is not already at capacity before adding supplemental load. This unit is a supplemental device — it requires a primary grow light already in operation.

Infrastructure Note: Magnetic mounting requires a steel or ferrous-compatible frame surface. Verify tent frame or fixture material before installation. UIS controller integration requires a compatible AC Infinity UIS controller (sold separately).

How It Works

The IONBEAM U2 operates as a two-bar supplemental UV array, each bar measuring 10.98 x 1.08 in. (27.9 x 2.75 cm) and housing 12 Samsung LM301H EVO diodes tuned to 365nm and 395nm emission wavelengths. The 365nm channel targets the UVB-adjacent range associated with secondary metabolite stress response pathways, while the 395nm channel delivers near-UV energy that bridges into the visible violet range, supporting photomorphogenic signaling during the flowering window. Together, these two channels simulate the UV component of natural solar radiation that sealed cultivation environments otherwise eliminate entirely.

Power delivery is handled through a 99.8 in. (253.4 cm) power cord terminating in a NEMA 1-15 Type-A US plug, with a 9.1 in. (23.2 cm) connector cord linking the bars to the Dimming Schedule Controller (3.31 x 1.26 in. / 8.4 x 3.2 cm). The controller provides ten discrete brightness intensity levels plus OFF, ON, and SCHEDULE modes, enabling operators to program UV exposure windows that align precisely with the flowering photoperiod without manual intervention. The IP65-rated unibody aluminum housing with aluminum board construction resists moisture ingress across the full 35–85% RH operating range, and the included steel bars enable magnetic attachment to grow tent frames, bar-style fixtures, and canvas structures without tools or permanent modification. The system integrates natively with the UIS platform, allowing smart program control and app-based scheduling through compatible AC Infinity UIS controllers. In practical terms, the IONBEAM U2 delivers targeted 365nm and 395nm UV across 2x2, 2x4, and 3x3 canopy footprints at 24W and 0.06A from a standard NEMA 1-15 outlet, with a rated service life of 50,000 hours.

System Integration

To operate this platform at peak efficiency, verify your ecosystem matches these requirements:

• Controller Compatibility: The IONBEAM U2 includes a standalone Dimming Schedule Controller. For UIS smart program and app-based control, a compatible AC Infinity UIS controller is required (sold separately). Confirm UIS controller model compatibility before purchase.
• Mounting Surface: Magnetic mounting requires a ferrous (steel) frame surface. Verify grow tent frame or fixture material is steel-compatible before relying on magnetic attachment. Included steel bars provide the mounting interface.
• Power Supply: NEMA 1-15 Type-A outlet required. Unit draws 0.06A at 100–240V AC, 50/60 Hz. Confirm available outlet capacity on the circuit before adding supplemental load.
• Primary Lighting: The IONBEAM U2 is a supplemental device. A primary full-spectrum grow light must already be in operation. This unit does not replace primary photosynthetic lighting.
• Environmental Range: Confirm facility operating humidity falls within 35–85% RH. The IP65 rating provides moisture ingress protection within this range under normal sealed-enclosure conditions.

Facility Integration Data

The following ROI reference and comparison data are provided to assist procurement and facility planning decisions for the IONBEAM U2 supplemental UV kit.

Operator Field Note

• Weight and Structural: Each 2-bar kit weighs 3.2 lb total. Magnetic mounting is designed for steel grow tent frames and bar-style fixture rails — confirm the mounting surface is ferrous before relying on magnetic attachment. Do not mount on aluminum or non-ferrous frames without supplemental mechanical fastening.
• Electrical: The unit draws 0.06A at 100–240V AC via a NEMA 1-15 Type-A plug. The power cord is 99.8 in. (253.4 cm) — plan outlet placement accordingly. Do not use extension cords rated below the circuit's breaker capacity.
• UV Exposure Warning: The IONBEAM U2 emits 365nm and 395nm UV radiation. Do not look directly at the bars during operation. Limit direct skin exposure. Use appropriate eye protection when servicing or repositioning bars while powered.
• Environmental Setpoints: Rated for 35–85% RH operating range. IP65 housing provides protection against dust ingress and low-pressure water jets — it is not rated for submersion or direct high-pressure wash-down. Maintain ambient conditions within the rated humidity band for rated service life.
• Supplemental Role Only: This unit does not produce sufficient photosynthetically active radiation to sustain plant growth independently. It must operate alongside a primary grow light. Deploying it as a standalone light source will not support normal plant development.

Shipping & Logistics

• Origin: Ships from Cannafull Spectrum Solutions' authorized distribution point within the contiguous 48 United States.
• Processing: Orders are processed within 1–2 business days of confirmed payment. Tracking information is provided upon shipment.
• Damage: Inspect all shipments within 48 hours of delivery. Report any shipping damage immediately to Cannafull Spectrum Solutions at (888) 378-0017 or sales@cannafullspec.com. Damage reported after 48 hours may not be eligible for carrier claims.
• Returns: Returns accepted within 30 days of delivery for units in original, uninstalled condition. A Return Authorization (RA) number is required before returning any product. Contact Cannafull Spectrum Solutions to initiate the RA process.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions? (888) 378-0017 or sales@cannafullspec.com

What's in the Box

• 2x IONBEAM U2 UV LED bars (11 in. each, 12 Samsung LM301H EVO diodes per bar, 365nm + 395nm)
• 1x Dimming Schedule Controller (3.31 x 1.26 in. / 8.4 x 3.2 cm)
• 1x Power cord — 99.8 in. (253.4 cm), NEMA 1-15 Type-A US plug
• 1x Connector cord — 9.1 in. (23.2 cm)
• Included steel bars for magnetic mounting

Note: Box contents are based on available manufacturer data. Verify complete contents upon receipt. Contact Cannafull Spectrum Solutions at (888) 378-0017 if any components are missing or damaged.

Regional Compliance & Deployment Notes

Commonly deployed in sealed commercial cultivation facilities across the United States. Installation, HVAC sizing, and electrical requirements vary by jurisdiction; always verify with local code.