Alien Hydroponics Pipe 28mm Barrier Pipe 1 Meter - Venturi Feed

Quick Spec: SKU BD101-3003 | 28mm OD | 100cm Length | White Rigid Construction | Push-Fit and Barbed Fitting Compatible

Precision Control in Any Space

Every irrigation circuit has a weakest link, and in most production setups that link is the pipe itself. Flexible tubing kinks under pressure, undersized bore creates back-pressure that starves downstream sites, and improvised connections leak at the joints — slowly at first, then catastrophically. The result is uneven feed delivery across the reservoir network: some sites receiving full flow, others starved, and the operator left chasing symptoms rather than solving the root cause. That variance compounds across every cycle, eroding consistency and making it impossible to attribute yield differences to anything other than the system fighting itself.

After integrating standardized rigid pipe throughout the irrigation circuit, the operational picture changes entirely. Feed rates stabilize across every connection point. Reservoir turnover becomes predictable. Maintenance intervals shift from reactive leak-chasing to scheduled inspection, and the system behaves the same on day one as it does on day one hundred. Operators can focus on dialing in nutrient concentration and environmental parameters rather than troubleshooting flow anomalies that should never have existed in the first place.

The mechanism behind that stability is dimensional precision and material rigidity. The Alien Hydroponics 28mm Rigid Pipe is manufactured to a 28mm outer diameter with a precision-cut 100cm length, providing a consistent bore geometry that eliminates the flow restriction introduced by flexible tubing under pressure. The rigid construction holds its cross-section under load — no kinking, no collapse, no progressive restriction as system pressure fluctuates. Push-fit and barbed fitting compatibility means the pipe integrates directly into existing RDWC, NFT, and aeroponic manifold architectures without adapter stacks or custom fabrication. The white exterior maintains visual clarity across the irrigation layout, making leak detection and system inspection straightforward during routine walkthroughs. In practical terms, the Alien Hydroponics 28mm Rigid Pipe delivers a dimensionally stable 28mm OD flow path across a 100cm run with leak-resistant push-fit and barbed fitting compatibility for RDWC, NFT, and aeroponic systems.

Where This Belongs (and Doesn't)

This pipe is a passive irrigation infrastructure component. It is not rated for pressurized mains supply, high-temperature fluid transfer, or chemical dosing lines carrying concentrated nutrient stock solutions. Confirm fitting compatibility with your specific manifold and reservoir hardware before installation. Consult your system manufacturer's specifications for pressure and flow requirements.

How It Works

The Alien Hydroponics 28mm Rigid Pipe operates on a straightforward engineering principle: dimensional consistency produces flow consistency. The 28mm outer diameter establishes a fixed bore geometry that does not deform under the operating pressures typical of recirculating hydroponic systems. Unlike flexible tubing, which can collapse at bends or expand under pressure to create variable internal volume, this rigid construction maintains a uniform cross-section from one end of the 100cm run to the other. That uniformity is what translates directly into predictable flow rates at every downstream connection point in the irrigation circuit.

Fitting integration is handled through push-fit and barbed connection compatibility. Push-fit fittings engage the pipe's outer diameter with an internal collet that locks under pressure, creating a leak-resistant seal without adhesive or clamp hardware. Barbed fittings provide an alternative connection method for operators working with flexible tubing transitions at manifold entry and exit points. Both connection types are standard across RDWC, NFT, and aeroponic system architectures, meaning this pipe drops into existing plumbing layouts without requiring system-wide hardware changes.

The white rigid material serves a dual operational function. Visually, it provides a clean, high-contrast surface against which moisture, algae growth, and fitting failures are immediately visible during inspection — a practical advantage in any production environment where early leak detection prevents nutrient loss and floor contamination. Structurally, the rigid material resists the creep and deformation that flexible tubing exhibits over extended operating periods, maintaining fitting engagement integrity across long system run times. In practical terms, the Alien Hydroponics 28mm Rigid Pipe delivers a fixed 28mm OD flow path across a 100cm rigid run with push-fit and barbed fitting compatibility, maintaining dimensional stability throughout continuous recirculating irrigation operation.

System Integration

• RDWC Manifold Runs: Use as interconnect pipe between reservoir modules, maintaining consistent bore geometry across multi-site recirculating circuits to eliminate flow imbalance between sites.
• NFT Channel Supply Lines: Install as the rigid supply run from reservoir to channel inlet, providing a stable flow path that does not flex or kink under pump pressure variations.
• Aeroponic Feed Distribution: Integrate into reservoir-to-manifold plumbing where dimensional stability is required to maintain consistent pressure at spray nozzle inlets.
• Top-Feed Drain-to-Waste Circuits: Deploy as the primary distribution pipe from reservoir to individual site feed points, replacing flexible tubing sections that introduce variable restriction across the run.
• Multi-Unit Scaling: Standardize pipe diameter across all irrigation circuits in a multi-bay facility to simplify spare parts inventory and reduce fitting compatibility variables during system expansion or maintenance.

Facility Integration Data

The following ROI reference data is provided to assist procurement and operations teams in evaluating the cost impact of standardizing irrigation pipe across multi-bay and multi-unit facility deployments. Figures are based on the MAP price of $12.60 per unit (SKU BD101-3003) and represent hardware cost only; installation labor, fittings, and ancillary plumbing components are not included.

Operator Field Notes

• Confirm fitting type before ordering: Push-fit fittings engage the 28mm OD directly; barbed fittings require a compatible barb-to-pipe adapter. Verify your manifold hardware before integrating this pipe into an existing circuit.
• Cut to length only if necessary: The 100cm precision-cut length is designed for standard bay spacing in RDWC and NFT configurations. If custom lengths are required, use a pipe cutter rated for rigid plastic to maintain a clean, square end face for fitting engagement.
• Inspect end faces before installation: Any burring or deformation at the cut ends will compromise push-fit collet engagement and increase leak risk. Deburr all cut ends before fitting installation.
• White surface aids system monitoring: The white exterior makes moisture accumulation, algae growth, and fitting seepage visible during routine walkthroughs. Incorporate pipe inspection into standard maintenance protocols.
• Standardize diameter across the circuit: Mixing 28mm rigid pipe with smaller-bore flexible tubing in the same circuit creates restriction points at transitions. Where possible, standardize bore diameter across the full run to maintain flow uniformity.
• Inner diameter not specified by manufacturer: Wall thickness and inner diameter are not published in manufacturer source data. If precise flow rate calculations are required for your system design, contact Alien Hydroponics directly for material specification documentation.

Operator FAQ

Shipping and Logistics

• Shipping Jurisdiction: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this jurisdiction cannot be fulfilled.
• Packaging: Shipped as individual 100cm rigid pipe sections. Ensure receiving dock dimensions accommodate 100cm (approximately 39.4 inches) length without bending or compression during transit handling.
• Returns: Returns are accepted for defective or damaged items in accordance with Cannafull Spectrum Solutions' return policy. Inspect all pipe sections upon receipt and document any transit damage before installation.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about shipping, lead times, or volume orders? Contact Cannafull Spectrum Solutions directly before placing your order.

What's in the Box

• 1x Alien Hydroponics 28mm White Rigid Pipe — 100cm precision-cut length (SKU BD101-3003)

Fittings, manifold hardware, reservoir components, and ancillary plumbing accessories are not included. Confirm fitting compatibility with your existing system hardware before installation. Contents confirmed from manufacturer source data; packaging inserts and documentation may vary by production batch.

Regional Compliance and Deployment Notes

• U.S. Deployment: This product is sold and shipped exclusively within the contiguous 48 United States through Cannafull Spectrum Solutions.
• Facility Compliance: Operators are responsible for ensuring that irrigation system installations comply with applicable state and local plumbing codes, facility licensing requirements, and any environmental regulations governing water discharge and nutrient runoff in their jurisdiction.
• Material Safety: Confirm material compatibility with the nutrient solutions, pH adjustment chemicals, and sanitizing agents used in your specific irrigation circuit. Alien Hydroponics does not publish chemical resistance data in available source documentation; consult the manufacturer for material specification details if chemical compatibility is a concern.
• Potable Water Use: This pipe is specified for hydroponic irrigation system use. It is not represented as certified for potable water supply applications. Do not use in drinking water supply lines without confirming applicable NSF/ANSI certification status with the manufacturer.
• Electrical Clearance: Maintain appropriate clearance between irrigation pipe runs and electrical conduit, ballasts, drivers, and junction boxes in accordance with your facility's electrical safety standards and applicable NEC requirements.

Product specifications, pricing, and availability are subject to change without notice. All technical data presented on this page is sourced from manufacturer documentation available at time of publication. Cannafull Spectrum Solutions makes no representations beyond what is confirmed in manufacturer source data. Verify current specifications with Cannafull Spectrum Solutions or Alien Hydroponics before making procurement decisions for critical system infrastructure.