Mars Hydro VG80-Red Supplemental Far-Red Light | $99.99 MAP
Mars Hydro VG80-Red Supplemental Far-Red Light | $99.99 MAP 已缺货，一旦有货将立即发货。
Unlock Trade Pricing
Join our commercial tier for bulk pricing and inventory alerts.
Mars Hydro VG80-Red Supplemental Far-Red Light | $99.99 MAP
Mars Hydro VG80-Red Supplemental Far-Red Light | $99.99 MAP 已缺货，一旦有货将立即发货。
描述
描述
The Mars Hydro VG80-Red is a targeted far-red supplemental light fixture engineered for craft operators running compact production spaces who need precise IR spectrum augmentation without the overhead of a full-fixture replacement cycle.
- Outcome: Targeted far-red delivery (730–740 nm) to drive photoperiod signaling and end-of-day extension protocols in space-constrained production environments.
- Replaces: Uncontrolled HPS supplemental setups and broad-spectrum fixtures used inefficiently for IR augmentation alone.
- Environment: Grow tents, small production rooms, cabinet enclosures, and tiered plant shelving systems.
FACTORY-AUTHORIZED DEALER — CANNAFULL SPECTRUM SOLUTIONS
Deployed in licensed commercial facilities across the United States.
Quick Spec: MAP $99.99 | SKU: MH-VG80-RED | IR Spectrum: 730–740 nm | Warranty: Up to 5 years
Precision Control in Any Space.
When your supplemental lighting setup is built on guesswork — fixtures that deliver inconsistent output, IR channels you cannot isolate, and intensity levels you cannot dial in — the cost is invisible until it shows up in your results. Uneven canopy response, unpredictable transition timing, and wasted energy draw are not random events. They are the direct output of equipment that was never designed to give you control. In a compact production space, that lack of precision is amplified: every square foot carries more weight, and every variable you cannot manage becomes a liability you carry through every cycle.
After deploying the VG80-Red, the operational picture changes. Far-red delivery becomes a scheduled, repeatable event — not an approximation. End-of-day extension protocols run on demand. Canopy response to photoperiod signaling becomes consistent from run to run, and the fixture does it without generating the thermal load that forces you to compensate elsewhere in your environmental control stack. The space stays predictable. The results follow.
The mechanism behind that consistency is a purpose-built IR spectrum output centered on the 730–740 nm waveband — the precise range that drives phytochrome photostationary state shifts and end-of-day signaling responses. The fixture operates on 110–120V input, draws 100W, and delivers 190 µmol/s PPF at 2.0 µmol/J photon efficacy. Dimming is supported, allowing intensity adjustment across growth stages from early vegetative through late flower without swapping hardware. Vegetative coverage reaches 2×2 ft; flower coverage is rated at 1.5×1.5 ft. In practical terms, the VG80-Red delivers 190 µmol/s PPF across a 2×2 ft vegetative footprint at 100W on 110–120V input.
Where This Belongs (and Doesn't)
Electrical installation, circuit load calculations, and HVAC integration should be reviewed by a licensed electrician or facility engineer before deployment. Cannafull Spectrum Solutions provides product specifications for operator reference only and does not provide installation services.
Recommended Deployment Environments
- Grow tents (2×2 ft vegetative / 1.5×1.5 ft flower footprint)
- Small production rooms requiring targeted IR supplementation
- Cabinet and closet enclosures with limited fixture clearance
- Tiered plant shelving systems where full-spectrum fixtures are already primary
- Facilities running end-of-day far-red extension protocols
Not Recommended For
- Primary canopy lighting in large-scale production rooms — this is a supplemental fixture, not a standalone primary source
- Facilities requiring full-spectrum 400–700 nm primary output from a single fixture
- Operations using the iTime Dual-Plug Timer for dimming control — dimming is not compatible with that timer configuration
- Environments requiring CSA or Canadian compliance certifications
How It Works
The VG80-Red is built around a 225-diode array tuned to the 730–740 nm far-red waveband. This is not a broad-spectrum fixture with IR as an afterthought — the entire optical architecture is oriented toward delivering phytochrome-active far-red photons at the canopy level with measurable consistency. The 225 LED chips are configured to produce 190 µmol/s total PPF at a photon efficacy of 2.0 µmol/J, meaning the fixture converts electrical input to usable photon output at a rate that justifies its position in a precision supplemental stack.
Power input is 100W on 110–120V, making the fixture compatible with standard facility circuits without requiring dedicated high-amperage drops. The 2026 dimmable version introduces adjustable intensity output, allowing operators to modulate far-red delivery across growth stages — reducing intensity during early vegetative phases and scaling up through late flower — without swapping fixtures or adding external control hardware. One operational constraint applies: dimming is not supported when the fixture is connected to the iTime Dual-Plug Timer. Operators using timer-based scheduling should verify their control configuration before deployment. In practical terms, the VG80-Red delivers 190 µmol/s PPF across a 2×2 ft vegetative footprint at 100W draw on standard 110–120V input, with stage-adjustable dimming available outside of iTime timer configurations.
Commercial Assurance
The VG80-Red is sold through Cannafull Spectrum Solutions as a factory-authorized dealer. Every unit is covered under the manufacturer's warranty program.
- Warranty Period: Up to 5 years, as stated by the manufacturer.
- Customer Support: Lifetime customer support is available through the manufacturer's support channel.
- Authorized Channel: Purchasing through Cannafull Spectrum Solutions ensures warranty validity and access to manufacturer support pathways.
- MAP Compliance: This product is sold at MAP pricing of $99.99 (SKU: MH-VG80-RED). Pricing below MAP is not authorized.
System Integration
- Primary Fixture Pairing: Deploy alongside full-spectrum primary fixtures (400–700 nm) to add targeted far-red augmentation without replacing existing canopy lighting infrastructure.
- Circuit Compatibility: 100W draw on 110–120V input is compatible with standard 15A and 20A facility circuits. Verify total circuit load before adding supplemental fixtures to an existing run.
- Dimming Control: Intensity adjustment is available via the onboard dimming function. Note that dimming is not compatible with the iTime Dual-Plug Timer — use an alternative scheduling or control method if timer-based dimming is required.
- Coverage Stacking: For production spaces larger than 2×2 ft, multiple VG80-Red units can be deployed to tile supplemental far-red coverage across the canopy without requiring a single high-wattage fixture.
- Thermal Load: The fixture's passive thermal management profile keeps heat addition to the grow environment minimal, reducing the compensation burden on environmental control systems in small enclosed spaces.
Facility Integration Data
The following ROI reference table is provided for operators evaluating multi-unit supplemental deployments. Figures are based on MAP pricing of $99.99 per unit and do not include shipping, installation labor, or facility electrical upgrade costs.
| Fleet Size | Total Capital Outlay (MAP) | Total PPF Output (µmol/s) | Total Wattage Draw | Veg Coverage Footprint |
|---|---|---|---|---|
| 10 Units | $999.90 | 1,900 µmol/s | 1,000W | 10 × 2×2 ft zones |
| 20 Units | $1,999.80 | 3,800 µmol/s | 2,000W | 20 × 2×2 ft zones |
| 50 Units | $4,999.50 | 9,500 µmol/s | 5,000W | 50 × 2×2 ft zones |
Fleet pricing does not reflect volume discount availability. Contact Cannafull Spectrum Solutions for multi-unit procurement inquiries.
Operator Field Notes
- Dimming Compatibility Check First: Before integrating the VG80-Red into an existing control setup, confirm your timer and controller configuration. Dimming is not supported with the iTime Dual-Plug Timer — this is a hard constraint, not a preference.
- Far-Red Is Supplemental by Design: The 730–740 nm output of this fixture is optimized for photoperiod signaling and end-of-day extension. It is not a replacement for primary full-spectrum canopy lighting. Deploy it as a layer on top of an existing primary fixture stack.
- Voltage Range Is Narrow: Input is rated for 110–120V. Do not deploy on 240V circuits without confirming fixture compatibility with the manufacturer. Standard U.S. residential and light commercial circuits are within spec.
- Coverage Footprint Is Stage-Dependent: Vegetative coverage is rated at 2×2 ft; flower coverage drops to 1.5×1.5 ft. Plan fixture spacing based on the growth stage that represents the majority of your production cycle in each zone.
- Passive Cooling Means No Fan Noise, No Fan Failure: There are no moving parts in the thermal management system. In enclosed spaces where acoustic environment and maintenance overhead matter, this is an operational advantage over active-cooled alternatives.
- Yield Comparison Baseline: The manufacturer reports approximately 30% yield improvement compared to traditional HPS/MH lamps under equivalent conditions. This figure is manufacturer-reported and should be validated against your specific cultivar and environmental baseline.
Operator FAQ
Q: Is the VG80-Red a standalone primary light or a supplemental fixture?
A: The VG80-Red is a supplemental fixture. Its output is concentrated in the 730–740 nm far-red waveband, which is optimized for photoperiod signaling and end-of-day extension protocols. It does not provide the full 400–700 nm spectrum required for primary photosynthetic canopy lighting. It must be deployed alongside a full-spectrum primary fixture to support a complete production lighting stack.
Q: Does the dimming function work with all timer and controller setups?
A: No. The 2026 dimmable version of the VG80-Red supports intensity adjustment, but dimming is not compatible with the iTime Dual-Plug Timer. If your facility uses the iTime Dual-Plug Timer for scheduling, the fixture will operate but the dimming function will not respond through that controller. Use an alternative control method if stage-based intensity adjustment is required.
Q: What is the actual coverage area for vegetative and flowering stages?
A: Vegetative coverage is rated at 2×2 ft. Flower coverage is rated at 1.5×1.5 ft. The reduction in flower coverage reflects the higher photon density requirements during the reproductive stage. Plan fixture placement based on the stage that represents the majority of your production cycle in each zone, and verify PPFD at canopy level for your specific mounting height.
Q: What voltage does the VG80-Red require, and is it compatible with standard U.S. facility circuits?
A: The VG80-Red operates on 110–120V input, which is compatible with standard U.S. residential and light commercial circuits. At 100W draw, the fixture presents a low circuit load and can be added to existing runs without requiring dedicated high-amperage drops in most configurations. Always verify total circuit load with a licensed electrician before adding fixtures to an existing circuit.
Q: What warranty coverage applies to the VG80-Red purchased through Cannafull Spectrum Solutions?
A: The VG80-Red carries an up-to-5-year manufacturer warranty when purchased through an authorized dealer. Cannafull Spectrum Solutions is a factory-authorized dealer, which means warranty claims are processed through the manufacturer's standard support channel. Lifetime customer support is also available through the manufacturer. Retain your purchase confirmation as proof of authorized purchase for warranty purposes.
Q: How does the VG80-Red compare to HPS supplemental lighting in terms of energy consumption?
A: The manufacturer reports that the VG80-Red can effectively replace a 150W HPS light while reducing energy consumption by up to 30%. At 2.0 µmol/J photon efficacy, the fixture converts electrical input to usable photon output at a rate that HPS technology cannot match at equivalent wattage. The manufacturer also reports approximately 30% yield improvement compared to traditional HPS/MH lamps under equivalent conditions — a figure that should be validated against your specific cultivar and environmental baseline before projecting production outcomes.
Shipping & Logistics
- Shipping Jurisdiction: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, and international destinations are not fulfilled through this channel.
- Lead Time: Standard processing and shipping timelines apply. Contact Cannafull Spectrum Solutions directly for current lead time estimates on single-unit and multi-unit orders.
- Returns: Returns are accepted subject to the conditions outlined in the Cannafull Spectrum Solutions Return Policy. Products must be in original, uninstalled condition to qualify for return consideration. Review full terms at cannafullspec.com/pages/return-policy before ordering.
- Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.
For procurement inquiries, volume pricing, and order support: contact Cannafull Spectrum Solutions directly via cannafullspec.com.
What's in the Box
- 1 × Mars Hydro VG80-Red Supplemental Far-Red LED Grow Light (SKU: MH-VG80-RED)
- Hanging hardware (confirm with manufacturer documentation included in shipment)
- Power cord
Note: Box contents are based on available manufacturer documentation. Cannafull Spectrum Solutions recommends verifying included accessories against the packing list included with your shipment. If any items are missing or damaged upon receipt, contact the manufacturer's support channel immediately. Dimensions and weight are not specified in available source data — consult the manufacturer's current product documentation for physical specifications before planning installation clearances.
Regional Compliance & Deployment Notes
- Jurisdiction: This product is sold and shipped within the contiguous 48 United States only. No Canadian provincial compliance, Health Canada certification, or CSA certification language applies to this listing.
- Electrical Compliance: Operators are responsible for ensuring that fixture installation complies with applicable local, state, and national electrical codes. Cannafull Spectrum Solutions does not provide installation services or electrical compliance certification.
- Licensed Facility Use: This product is deployed in licensed commercial production facilities across the United States. Operators are responsible for compliance with all applicable state and local licensing requirements governing their production environment.
- Voltage Specification: The VG80-Red is rated for 110–120V input. Deployment outside this voltage range is not supported and may void the manufacturer warranty. Consult a licensed electrician before installation in any facility with non-standard electrical infrastructure.
- Warranty Jurisdiction: Warranty service is administered through the manufacturer's authorized support channel. Cannafull Spectrum Solutions, as a factory-authorized dealer, facilitates warranty claims for U.S.-based purchasers. Warranty terms are subject to the manufacturer's current policy — review full terms at the time of purchase.
Product specifications, pricing, and availability are subject to change without notice. All technical data presented on this page is sourced from manufacturer documentation current at the time of publication. Cannafull Spectrum Solutions makes no independent performance guarantees beyond those stated by the manufacturer. Verify all specifications against current manufacturer documentation before making procurement decisions.
Route Package Protection
Route Package Protection
在 CannaFull Spectrum Solutions，我们明白在运输过程中安心是至关重要的。这就是为什么我们自豪地为您的所有在线订单提供全面的运输保护和跟踪解决方案 Route！
Route：您的一体化运输中心
Route 与您的 CannaFull Spectrum Solutions 购物体验无缝集成，让您完全掌控配送过程，安心无忧。以下是 Route 提供的功能：
- 自动包裹保护：在 CannaFull Spectrum Solutions 上下的每个订单都会自动附带 Route 的基本保护计划，保护您的购买免遭包裹丢失、被盗或损坏。
- 增强型跟踪： Route 超越了基本跟踪信息。获取实时更新、预计交付时间以及有关潜在延误或问题的主动警报。
- 轻松的索赔管理：如果您的包裹遇到问题，Route 可简化索赔流程。直接通过 Route 应用提出索赔，即可快速高效地获得解决方案。
- 价格匹配保证： Route 可确保您获得最优惠的价格。如果您在一定时间内（通常为 48 小时）发现同一商品的广告价格更低，Route 将退还差价。
- 丢失邮件更换： Route 提供额外的安全保障。如果您的包裹被标记为已送达但您从未收到，Route 可能会更换它，具体取决于具体物品和承保选项。
使用大麻全光谱解决方案路线的好处：
- 放心购物：知道您购买的商品不会丢失、被盗或损坏，您就可以完全放心购物。
- 轻松跟踪：利用 Route 的实时跟踪和主动通知随时了解每一步情况。
- 轻松索赔： Route 简化了索赔流程，在您遇到任何与交付相关的问题时，可为您节省时间并避免烦恼。
- 每次购买都增加价值： Route 会自动为您的 [您的商店名称] 订单提供基本保护和有价值的跟踪功能，无需支付额外费用。
如何开始路线：
使用 Route 购买 CannaFull Spectrum Solutions 简单又方便：
- 完成您的订单：当您在 CannaFull Spectrum Solutions 结账时，您将看到激活 Route 对您的订单的保护的选项（通常是预先选择的）。
- 下载路线应用程序：为了获得更加无缝的体验，请下载适用于 iOS 和 Android 的免费路线应用程序。
- 追踪您的包裹：登录路线应用程序或查看您的电子邮件以获取追踪更新并管理您的受保护货件。
Route：您的无忧运输合作伙伴
CannaFull Spectrum Solutions 致力于通过每次购买提供 Route 服务，为您提供无压力的购物体验。Route 让您可以放心购物，因为您知道您的包裹受到保护，并且每一步都可以轻松跟踪。
常见问题：
- Route 是免费的吗？ CannaFull Spectrum Solutions 的每笔订单都会自动包含基本 Route 保护。Route 还提供具有附加功能和覆盖范围的可选高级计划。
- 如何向 Route 提出索赔？可通过 Route 应用程序或网站轻松提出索赔。
- 如果我的包裹丢失了怎么办？根据具体情况和您选择的保险计划，Route 可能会赔偿您或更换丢失的物品。
放心购物，轻松追踪！选择 CannaFull Spectrum Solutions，在下次在线购物时体验 Route 的强大功能。
Shiping, Cancelations & Returns
Shiping, Cancelations & Returns
- 标准运费（预计 3-5 个工作日内送达）：X 美元（Y 美元以上订单免费）
- 加急运输（预计 1-2 个工作日内送达）：$Z
国际运输（如适用）：我们目前提供/不提供国际运输。（如果您提供，请注明费率和预计交货时间）。
追踪和路线保护：订单发货后，您将通过电子邮件收到带有追踪号的通知。我们还与 Route 合作，在结账时为所有订单提供额外的运输保护（包裹丢失、被盗或损坏），只需支付少量费用。
请注意：由于代发货的特性，送货时间可能比其他商店宣传的稍长。我们努力提供尽可能准确的估算，但可能会出现不可预见的情况。
取消政策
我们理解计划可能会发生变化，因此您可以在下单后 24 小时内取消订单并获得全额退款。如果您的订单已转发给我们的履行合作伙伴，我们将尽力满足您的取消请求，但可能会收取全额取消费或商店信用额。
退货政策
我们希望您对所购商品完全满意。如果您出于任何原因不满意，您可以在购买之日起 30 天内退回符合条件的商品。
符合条件的商品：大多数全新、未使用、未开封且带原包装的商品均符合退货条件。例外情况可能包括（如适用，请列出任何例外情况，例如最终销售商品或易腐烂商品）。
退货条件：要获得全额退款，退回的商品必须是未使用状态，且所有原始标签和包装完好无损。
退货运费：如果退货是由于我们的错误（例如，寄送了错误的商品）造成的，我们将承担退货运费。否则，您将承担退货运费。但是，您可以使用 Route 的保护计划（如果购买）来补偿丢失、被盗或损坏包裹的退货运费。
退款流程：收到您退回的商品并核实其状况后，我们将在 X 个工作日内处理您的退款。退款将以您原来的付款方式或商店信用额度发放，具体取决于您的偏好。
通过在我们这里购物，您同意本运输、取消和退货政策中概述的条款。
Warranty
Warranty
在 CannaFull Spectrum Solutions，我们希望您对购买的产品充满信心。我们提供的许多 LED 生长灯都附带制造商保修，确保您的投资得到保护。
了解您的保修：
- 具体保修条款和条件将根据您购买的个别产品而有所不同。
- 我们强烈建议您在收到产品时查看随附的制造商保修信息。
- 该信息通常详细说明保修期、保险范围和索赔流程。
帮助中心：
虽然保修由制造商直接处理，但我们理解处理保修索赔有时会令人困惑。在 CannaFull Spectrum Solutions，我们在整个过程中为您提供支持：
- 轻松访问保修信息：我们努力在每个产品页面上提供清晰简明的保修信息。这通常包括可下载的保修文件或制造商保修网站的链接。
- 专属客户支持：如果您对产品保修有任何疑问或需要帮助提出索赔，请随时联系我们友好的客户支持团队。我们将很乐意指导您完成整个流程，并帮助您从制造商处获得应有的支持。
我们能做什么：
虽然我们不能直接处理保修索赔，但我们可以通过以下几种方式为您提供帮助：
- 帮助找到您的特定产品的相关保修信息。
- 提供制造商保修部门的联系方式。
- 提供有关完成和提交保修索赔的指导。
- 充当您和制造商之间的联络人，让您随时了解整个过程。
我们对您的承诺：
CannaFull Spectrum Solutions 致力于提供积极的客户体验。我们希望您对购买的产品感到满意，这包括确保您的保修索赔得到迅速有效的处理。
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Buy now pay later with
