Mars Hydro Adlite UV30 30W UV Grow Light | 365-370nm 2-Pack

Mars Hydro  |  库存单位: MH-ADLITE-UV30
正常价格 $65.99
结账时计算运费

Unlock Trade Pricing

Join our commercial tier for bulk pricing and inventory alerts.

Yield AI
15 questions per session Grow systems advisor · cannafullspec.com

描述

The Mars Hydro Adlite UV30 is a 30W (2-Pack) 365-370nm UV supplemental bar light engineered for operators running full-spectrum cultivation systems who need targeted UV delivery without adding a dedicated fixture controller or replacing their primary light infrastructure.

  • Outcome: Stimulated secondary metabolite production — flavonoids, anthocyanins — and measurable biomass response through consistent 365-370nm UV supplementation across a 3 ft x 2 ft canopy zone per bar pair.
  • Replaces: Uncontrolled UV exposure strategies, broad-spectrum workarounds, and single-point supplemental fixtures that leave coverage gaps in the canopy.
  • Environment: Sealed grow rooms, multi-tier vertical racks, and enclosed cultivation chambers operating on AC100-277V infrastructure.

FACTORY-AUTHORIZED DEALER — CANNAFULL SPECTRUM SOLUTIONS

Deployed in licensed commercial facilities across the United States.

Quick Spec: 30W total (15W per bar) | 365-370nm | PPF 12.31 µmol/s at AC240V | Coverage: 3 ft x 2 ft | Daisy Chain: 20 units at 120V / 40 units at 240V | Lifespan: 25,000 Hours

Precision UV. Zero Guesswork. Measurable Canopy Response.

The enemy is not a missing fixture — it is the invisible gap in your light recipe. Operators running full-spectrum primary lights without a dedicated UV channel are leaving a critical biological trigger unaddressed. Plants that evolved under high-UV solar conditions respond to that absence with reduced secondary metabolite synthesis, lower flavonoid and anthocyanin accumulation, and suppressed stress-response pathways that drive quality differentiation. The cost is not always visible in a single harvest. It accumulates across cycles as inconsistent potency profiles, variable terpene expression, and canopy zones that never quite perform the way the genetics promise. Equipment that was never designed to deliver UV as a discrete, controllable input cannot fix this — it can only obscure it.

After deployment, the cultivation environment changes in a specific and measurable way. Each bar pair delivers a defined 365-370nm UV band across a 3 ft x 2 ft canopy zone, integrated directly into the existing light schedule without a separate controller, a new circuit, or a structural modification to the room. Plants receive the UV stress signal that triggers flavonoid and anthocyanin synthesis on a repeatable, cycle-consistent basis. Secondary metabolite profiles stabilize. Biomass response becomes predictable. The facility stops relying on genetic potential alone and starts activating it through a controlled environmental input that was previously absent from the recipe.

The mechanism behind that outcome is a passively cooled bar architecture drawing 15W per bar (30W total for the 2-Pack, ±5%) across an AC100-277V input range, eliminating voltage compatibility as a deployment variable. At AC240V, the fixture delivers 12.31 µmol/s PPF in the 365-370nm UV band — the wavelength range documented to activate UV-B stress response pathways and secondary metabolite biosynthesis in high-UV-adapted cultivars. Passive thermal management means no fan, no moving parts, and no acoustic signature added to the room. The daisy-chain architecture supports up to 20 units at 120V and 40 units at 240V from a single power connection, allowing operators to scale UV supplementation across an entire multi-row facility without multiplying electrical termination points. Rated for 25,000 hours of operation, the fixture is designed to run through multiple production cycles before any maintenance consideration arises. In practical terms, the Adlite UV30 delivers 12.31 µmol/s PPF at 365-370nm across a 3 ft x 2 ft coverage zone at 15W per bar on any AC100-277V circuit.

Where This Belongs (and Doesn't)

Electrical integration should be performed by a qualified electrician in accordance with local codes. Thermal load calculations should account for supplemental fixture additions when sizing HVAC for enclosed cultivation environments.

Coverage Zone

Each 2-Pack unit covers a 3 ft x 2 ft canopy footprint. For multi-row or multi-tier deployments, additional units should be daisy-chained to maintain consistent UV delivery across the full canopy surface. At 240V, up to 40 units can be chained from a single power feed.

Correct Application

  • Supplemental UV layer over existing full-spectrum primary lights (FC4000, FC4800, FCE4800, TS3000, SP3000 and comparable fixtures under 500W)
  • Multi-tier vertical rack systems requiring per-shelf UV delivery
  • Enclosed chambers where UV-adapted cultivars — specific herbs, fruits, and flowering varieties — require targeted 365-370nm input
  • Facilities scaling UV coverage incrementally across multiple rooms or rows via daisy-chain expansion

Not Designed For

  • Standalone primary lighting — this fixture is a supplemental UV channel, not a full-spectrum primary source
  • Open outdoor or greenhouse installations without UV-rated enclosure protection
  • Applications requiring wavelengths outside the 365-370nm UV band

How It Works

The Adlite UV30 operates on a targeted single-band architecture. Each bar emits exclusively in the 365-370nm UV range — a wavelength band that sits at the boundary of UV-A and UV-B, documented to activate stress-response signaling in plants that evolved under high-UV solar environments. This is not a broad-spectrum fixture with UV as a minor component. The entire photon output of each bar is concentrated in this band, which means every µmol/s of PPF delivered to the canopy is a UV-active photon contributing to the intended biological response: upregulation of flavonoid and anthocyanin biosynthesis pathways, stimulation of secondary metabolite production, and suppression of certain pathogen and mold growth vectors through plant-side immune activation.

Thermal management is entirely passive. There are no fans, no heat sinks requiring airflow clearance, and no moving components that introduce failure modes or acoustic load to the cultivation environment. The bar form factor — 23.6 x 1.3 x 1.1 inches (600 x 33.2 x 29.5 mm) per bar — is designed for integration into tight vertical spacing on multi-tier racks where active cooling fixtures cannot be accommodated. Operating temperature range is -20 to 35°C (-4 to 95°F), covering the full range of controlled cultivation environments including cold-start conditions in facilities with overnight temperature drops.

Power architecture is universal-input: AC100-277V at 50/60 Hz, drawing 0.1829A at 120V, 0.1052A at 240V, and 0.09803A at 277V. The 1.5m power cord and 0.7m wire connection length provide practical reach for rack-mounted installations without requiring extension infrastructure. Daisy-chain capacity is 20 units at 120V and 40 units at 240V, enabling a single circuit to serve an entire multi-row UV supplementation deployment. The 25,000-hour rated lifespan means the fixture is designed to operate through multiple full production cycles before any replacement consideration is warranted. In practical terms, the Adlite UV30 delivers 12.31 µmol/s PPF at 365-370nm per 2-Pack unit across a 3 ft x 2 ft zone at 15W per bar on AC100-277V with zero active cooling components.

Commercial Assurance

Cannafull Spectrum Solutions is a factory-authorized dealer for Mars Hydro products. Every Adlite UV30 unit sold through this listing is a genuine manufacturer-sourced product eligible for all applicable manufacturer support programs.

  • Warranty: Warranty terms are not specified in available manufacturer source data for this SKU. Contact Cannafull Spectrum Solutions at support@cannafullspec.com for current warranty documentation before purchase.
  • Authenticity: Units ship directly from authorized inventory. No gray-market or third-party sourced stock.
  • Bulk Procurement: Multi-unit and fleet orders are available. Contact the commercial sales desk for volume pricing on deployments of 10 units or more.
  • Technical Support: Pre-sale integration questions and post-sale configuration support available via support@cannafullspec.com.

System Integration

  • Primary Light Pairing: Validated for use with FC4000, FC4800, FCE4800, TS3000, and SP3000 primary fixtures; recommended for any full-spectrum primary light under 500W where UV supplementation is absent from the native spectrum.
  • Circuit Load: At 120V, each 2-Pack draws 0.1829A; at 240V, 0.1052A; at 277V, 0.09803A. Daisy-chain capacity allows 20 units at 120V or 40 units at 240V on a single feed — calculate total amperage draw before committing to a circuit.
  • Mounting: Bar form factor (23.6 x 1.3 x 1.1 inches per bar) integrates into standard rack systems using included hanging ropes and zip ties; plastic rack mounts included for rigid installation options.
  • Scheduling: No dedicated controller required — integrate into existing light schedule via the primary fixture's timer or facility controller; the UV30 operates on the same on/off signal as the primary light circuit.
  • Scalability: Daisy-chain architecture supports incremental room-by-room or row-by-row UV coverage expansion without adding electrical termination points per unit.

Facility Integration Data

The following ROI reference data is calculated on the basis of MAP pricing ($65.99 per 2-Pack unit) and the 25,000-hour rated lifespan. Operators should validate against their actual utility rate and production cycle length.

Fleet Deployment Cost Reference

Fleet Size (2-Pack Units) Total Wattage Total PPF (µmol/s) at 240V Coverage Area Hardware Cost (MAP)
10 Units 300W 123.1 µmol/s 10 x 3 ft x 2 ft zones $659.90
20 Units 600W 246.2 µmol/s 20 x 3 ft x 2 ft zones $1,319.80
50 Units 1,500W 615.5 µmol/s 50 x 3 ft x 2 ft zones $3,299.50

Hardware cost calculated at MAP $65.99/unit. Wattage calculated at nominal 30W per 2-Pack. PPF calculated at 12.31 µmol/s per unit at AC240V. Coverage zones are additive and assume independent mounting positions. Bulk pricing may reduce per-unit cost — contact commercial sales desk for fleet quotes.

Operator Field Notes

  • UV Eye Safety: The 365-370nm output band is in the UV-A range and is not visible to the naked eye. Do not look directly at operating bars without UV-rated eye protection. This applies to all personnel entering the cultivation space during UV supplementation periods.
  • Supplemental-Only Architecture: This fixture delivers no PAR output in the photosynthetically active range. It does not replace or reduce the required output from your primary light. Schedule UV supplementation as an additive layer within your existing photoperiod — not as a substitute for any portion of it.
  • Daisy-Chain Circuit Planning: At 120V, each unit draws 0.1829A. A 20-unit daisy chain at 120V draws approximately 3.66A total. At 240V, a 40-unit chain draws approximately 4.21A total. Verify circuit capacity before reaching maximum daisy-chain count.
  • Mounting Clearance: The passive thermal design requires no forced-air clearance around the bar body, but ensure the bar surface is not in direct contact with light-blocking materials that could reduce UV transmission to the canopy.
  • Cultivar Matching: UV response is most pronounced in cultivars that evolved under high-UV solar conditions. Operators running UV-sensitive or low-UV-adapted varieties should introduce UV supplementation incrementally and monitor plant response before committing to full-cycle exposure schedules.
  • Operating Temperature Limits: Rated for -20 to 35°C (-4 to 95°F). Do not operate in environments exceeding 35°C ambient — passive cooling has no active thermal override and sustained overtemperature conditions will accelerate diode degradation ahead of the 25,000-hour rated lifespan.

Operator FAQ

Q: Can the Adlite UV30 be used as a standalone primary light?

A: No. The Adlite UV30 is a single-band UV supplemental fixture operating exclusively at 365-370nm. It delivers no output in the photosynthetically active radiation (PAR) range (400-700nm) and cannot support photosynthesis or primary plant growth on its own. It must be deployed alongside a full-spectrum primary light. Validated pairings include the FC4000, FC4800, FCE4800, TS3000, and SP3000, as well as any comparable full-spectrum primary fixture under 500W.

Q: How many units can I daisy-chain from a single power connection?

A: The Adlite UV30 supports daisy-chaining of up to 20 units at AC120V and up to 40 units at AC240V from a single power feed. Before reaching maximum chain count, verify that your circuit's breaker rating accommodates the cumulative amperage draw: approximately 3.66A for a 20-unit chain at 120V, and approximately 4.21A for a 40-unit chain at 240V. Operating at 240V is the preferred configuration for large-scale deployments due to the doubled chain capacity and reduced per-unit current draw.

Q: What biological effects does 365-370nm UV supplementation produce?

A: UV exposure in the 365-370nm band activates stress-response signaling pathways in plants adapted to high-UV solar environments. Documented responses include upregulation of flavonoid and anthocyanin biosynthesis, stimulation of secondary metabolite production, and activation of plant-side immune responses that can suppress certain pathogen and mold growth vectors. UV supplementation also supports biomass production through controlled stress induction. Response intensity varies by cultivar — varieties that naturally receive high UV exposure in their native environments show the most pronounced response.

Q: Does the Adlite UV30 require a dedicated controller or dimmer?

A: No dedicated controller is required. The Adlite UV30 operates on a standard on/off power input and can be integrated directly into an existing light schedule via the facility's primary timer or environmental controller. There is no dimming function on this fixture — UV output is fixed at the rated level when powered. Scheduling UV supplementation periods within the primary photoperiod is the standard integration method.

Q: What is the rated lifespan of the Adlite UV30, and does it require lamp replacement?

A: The Adlite UV30 is rated for 25,000 hours of operation. As a solid-state LED bar fixture with passive thermal management and no moving components, it has no consumable lamp element requiring scheduled replacement. At a typical 18-hour daily supplementation schedule, 25,000 hours represents approximately 3.8 years of continuous operation before any performance degradation consideration is warranted. Sustained operation above the 35°C ambient temperature limit will reduce effective lifespan.

Q: What voltage does the Adlite UV30 support, and does it work on both 120V and 240V circuits?

A: Yes. The Adlite UV30 accepts AC100-277V input at 50/60 Hz, making it compatible with standard 120V, 240V, and 277V facility circuits without requiring a voltage converter or separate driver. Current draw is 0.1829A at 120V, 0.1052A at 240V, and 0.09803A at 277V. The 240V configuration is recommended for large daisy-chain deployments due to the doubled chain capacity (40 units vs. 20 at 120V) and lower per-unit amperage draw.

Shipping & Logistics

  • Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, and international destinations cannot be fulfilled through this listing.
  • Carrier & Transit: Standard ground shipping via UPS or FedEx. Expedited and freight options available for multi-unit orders — contact the commercial sales desk prior to checkout for freight routing on orders of 10 or more units.
  • Returns: Defective units are eligible for return or replacement under applicable manufacturer support terms. Non-defective returns must be initiated within the return window specified in the Cannafull Spectrum Solutions Return Policy. Units must be in original, uninstalled condition with all included accessories.
  • Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions before ordering? Contact us at support@cannafullspec.com or via the store contact page.

What's in the Box

The following items are confirmed as included with the Adlite UV30 2-Pack (SKU: MH-ADLITE-UV30) based on manufacturer operational documentation:

  • 2x Adlite UV Light Bars (15W each, 365-370nm)
  • 2x Plastic rack mounts
  • 10x Zip ties
  • 4x Hanging ropes
  • 1x Power cable (1.5m cord length)

Note: Package contents are confirmed from manufacturer operational documentation. Weight is not specified in available source data. Verify contents against the physical packing list upon receipt. Contact support@cannafullspec.com within 48 hours of delivery if any item is missing or damaged.

Regional Compliance & Deployment Notes

  • Input Voltage Compliance: The Adlite UV30 accepts AC100-277V at 50/60 Hz. Verify that facility wiring and circuit protection are rated for the selected operating voltage before installation.
  • UV Safety Compliance: The 365-370nm output band constitutes UV-A radiation. Facilities operating UV supplemental fixtures may be subject to occupational UV exposure guidelines under applicable OSHA standards. Consult your facility's safety officer regarding personnel exposure limits and required PPE for cultivation spaces with active UV supplementation.
  • State Licensing: This product is sold for use in lawfully licensed cultivation facilities. Purchaser is solely responsible for compliance with all applicable state and local licensing, zoning, and operational regulations governing the cultivation environment in which this fixture is deployed.
  • Electrical Code: Installation must comply with the National Electrical Code (NEC) and all applicable local amendments. Daisy-chain configurations must be evaluated against circuit breaker ratings and conductor ampacity before energizing.
  • Shipping Jurisdiction: Available for shipment to licensed commercial facilities across the contiguous 48 United States only.

Cannafull Spectrum Solutions provides this compliance information as a reference for facility operators. It does not constitute legal or regulatory advice. Operators are responsible for independently verifying all applicable federal, state, and local requirements governing the use of UV supplemental lighting in their licensed cultivation environments.

Route Package Protection

在 CannaFull Spectrum Solutions,我们明白在运输过程中安心是至关重要的。这就是为什么我们自豪地为您的所有在线订单提供全面的运输保护和跟踪解决方案 Route!

Route:您的一体化运输中心

Route 与您的 CannaFull Spectrum Solutions 购物体验无缝集成,让您完全掌控配送过程,安心无忧。以下是 Route 提供的功能:

  • 自动包裹保护:在 CannaFull Spectrum Solutions 上下的每个订单都会自动附带 Route 的基本保护计划,保护您的购买免遭包裹丢失、被盗或损坏。
  • 增强型跟踪: Route 超越了基本跟踪信息。获取实时更新、预计交付时间以及有关潜在延误或问题的主动警报。
  • 轻松的索赔管理:如果您的包裹遇到问题,Route 可简化索赔流程。直接通过 Route 应用提出索赔,即可快速高效地获得解决方案。
  • 价格匹配保证: Route 可确保您获得最优惠的价格。如果您在一定时间内(通常为 48 小时)发现同一商品的广告价格更低,Route 将退还差价。
  • 丢失邮件更换: Route 提供额外的安全保障。如果您的包裹被标记为已送达但您从未收到,Route 可能会更换它,具体取决于具体物品和承保选项。

使用大麻全光谱解决方案路线的好处:

  • 放心购物:知道您购买的商品不会丢失、被盗或损坏,您就可以完全放心购物。
  • 轻松跟踪:利用 Route 的实时跟踪和主动通知随时了解每一步情况。
  • 轻松索赔: Route 简化了索赔流程,在您遇到任何与交付相关的问题时,可为您节省时间并避免烦恼。
  • 每次购买都增加价值: Route 会自动为您的 [您的商店名称] 订单提供基本保护和有价值的跟踪功能,无需支付额外费用。

如何开始路线:

使用 Route 购买 CannaFull Spectrum Solutions 简单又方便:

  1. 完成您的订单:当您在 CannaFull Spectrum Solutions 结账时,您将看到激活 Route 对您的订单的保护的选项(通常是预先选择的)。
  2. 下载路线应用程序:为了获得更加无缝的体验,请下载适用于 iOS 和 Android 的免费路线应用程序。
  3. 追踪您的包裹:登录路线应用程序或查看您的电子邮件以获取追踪更新并管理您的受保护货件。

Route:您的无忧运输合作伙伴

CannaFull Spectrum Solutions 致力于通过每次购买提供 Route 服务,为您提供无压力的购物体验。Route 让您可以放心购物,因为您知道您的包裹受到保护,并且每一步都可以轻松跟踪。

常见问题:

  • Route 是免费的吗? CannaFull Spectrum Solutions 的每笔订单都会自动包含基本 Route 保护。Route 还提供具有附加功能和覆盖范围的可选高级计划。
  • 如何向 Route 提出索赔?可通过 Route 应用程序或网站轻松提出索赔。
  • 如果我的包裹丢失了怎么办?根据具体情况和您选择的保险计划,Route 可能会赔偿您或更换丢失的物品。

放心购物,轻松追踪!选择 CannaFull Spectrum Solutions,在下次在线购物时体验 Route 的强大功能。

Shiping, Cancelations & Returns

订单处理:我们努力在 1-2 个工作日内处理所有订单。
运费和方式:我们提供多种运输方式以满足您的需求和预算。预计交货时间将在结账时显示,并可能因您选择的方式和位置而异。
  • 标准运费(预计 3-5 个工作日内送达):X 美元(Y 美元以上订单免费)
  • 加急运输(预计 1-2 个工作日内送达):$Z

国际运输(如适用):我们目前提供/不提供国际运输。(如果您提供,请注明费率和预计交货时间)。

追踪和路线保护:订单发货后,您将通过电子邮件收到带有追踪号的通知。我们还与 Route 合作,在结账时为所有订单提供额外的运输保护(包裹丢失、被盗或损坏),只需支付少量费用。

请注意:由于代发货的特性,送货时间可能比其他商店宣传的稍长。我们努力提供尽可能准确的估算,但可能会出现不可预见的情况。

取消政策

我们理解计划可能会发生变化,因此您可以在下单后 24 小时内取消订单并获得全额退款。如果您的订单已转发给我们的履行合作伙伴,我们将尽力满足您的取消请求,但可能会收取全额取消费或商店信用额。

退货政策

我们希望您对所购商品完全满意。如果您出于任何原因不满意,您可以在购买之日起 30 天内退回符合条件的商品。

符合条件的商品:大多数全新、未使用、未开封且带原包装的商品均符合退货条件。例外情况可能包括(如适用,请列出任何例外情况,例如最终销售商品或易腐烂商品)。

退货条件:要获得全额退款,退回的商品必须是未使用状态,且所有原始标签和包装完好无损。

退货运费:如果退货是由于我们的错误(例如,寄送了错误的商品)造成的,我们将承担退货运费。否则,您将承担退货运费。但是,您可以使用 Route 的保护计划(如果购买)来补偿丢失、被盗或损坏包裹的退货运费。

退款流程:收到您退回的商品并核实其状况后,我们将在 X 个工作日内处理您的退款。退款将以您原来的付款方式或商店信用额度发放,具体取决于您的偏好。

通过在我们这里购物,您同意本运输、取消和退货政策中概述的条款。

Warranty

在 CannaFull Spectrum Solutions,我们希望您对购买的产品充满信心。我们提供的许多 LED 生长灯都附带制造商保修,确保您的投资得到保护。

了解您的保修:

  • 具体保修条款和条件将根据您购买的个别产品而有所不同。
  • 我们强烈建议您在收到产品时查看随附的制造商保修信息。
  • 该信息通常详细说明保修期、保险范围和索赔流程。

帮助中心:

虽然保修由制造商直接处理,但我们理解处理保修索赔有时会令人困惑。在 CannaFull Spectrum Solutions,我们在整个过程中为您提供支持:

  • 轻松访问保修信息:我们努力在每个产品页面上提供清晰简明的保修信息。这通常包括可下载的保修文件或制造商保修网站的链接。
  • 专属客户支持:如果您对产品保修有任何疑问或需要帮助提出索赔,请随时联系我们友好的客户支持团队。我们将很乐意指导您完成整个流程,并帮助您从制造商处获得应有的支持。

我们能做什么:

虽然我们不能直接处理保修索赔,但我们可以通过以下几种方式为您提供帮助:

  • 帮助找到您的特定产品的相关保修信息。
  • 提供制造商保修部门的联系方式。
  • 提供有关完成和提交保修索赔的指导。
  • 充当您和制造商之间的联络人,让您随时了解整个过程。

我们对您的承诺:

CannaFull Spectrum Solutions 致力于提供积极的客户体验。我们希望您对购买的产品感到满意,这包括确保您的保修索赔得到迅速有效的处理。

Payment & Security

Payment methods

  • American Express
  • Diners Club
  • Discover
  • Google Pay
  • JCB
  • Mastercard
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Buy now pay later with