Mars Hydro ADlite Deep Red 30 Supplemental Light | 660nm 30W

Precision Control in Any Space.

When your primary fixture runs a fixed broadband spectrum, every stage of the crop cycle gets the same photon recipe — and that uniformity is the problem. During the flowering phase, the canopy is starved of the specific deep red wavelengths that drive the photomorphogenic responses operators depend on, while the rest of the spectrum continues drawing power against a biological need that isn't there. The result is a light recipe that never quite matches the stage, energy expenditure that doesn't map to output, and results that shift batch to batch without a clear mechanical explanation. Guesswork fills the gap where precision should be, and the equipment that was supposed to solve the problem becomes the source of the variance.

After deploying the ADlite Deep Red 30, the flowering environment operates on a defined photon schedule. The 660nm channel runs in lockstep with the primary fixture's 12-hour photoperiod — no manual intervention, no timer drift, no spectral gaps between what the canopy needs and what the fixture delivers. The supplemental layer is additive and targeted: it contributes only the wavelength that matters during the stage that requires it, and it goes dark when the stage ends. The facility's primary fixture remains unchanged; the ADlite Deep Red 30 fills the spectral deficit without displacing infrastructure or adding thermal load.

The mechanism behind that outcome is a two-bar passive-cooling architecture drawing 15W per bar for a total system draw of 30W, with both bars emitting at a tightly controlled 660nm deep red peak — the wavelength with the highest photosynthetic quantum yield in the red absorption band of chlorophyll. Each bar is independently powered with its own plug, eliminating daisy-chain dependency and allowing flexible positional deployment within the canopy footprint. Integration into the Mars Hydro iConnect ecosystem is achieved via the iTime 2-in-1 Smart Timer or iHub, enabling scheduled on/off control through the MarsPro App without requiring a dedicated controller per bar. The ADlite Deep Red 30 is compatible with any third-party primary fixture and can be embedded directly into Mars Hydro FC and FCE series fixtures using the bracket system for flush integration. In practical terms, the ADlite Deep Red 30 delivers 30W of targeted 660nm deep red photon output across two independently powered bars, compatible with any primary fixture under 500W and controllable via the MarsPro App through the iTime smart timer.

Where This Belongs (and Doesn't)

Electrical installation must comply with all applicable local codes. This fixture is independently powered via its own plug — no hardwiring required. HVAC load impact at 30W total draw is negligible in most configurations; verify with your facility's thermal management baseline before deployment in sealed environments with tight temperature tolerances.

How It Works

The ADlite Deep Red 30 is a two-bar supplemental fixture, with each bar rated at 15W for a combined system draw of 30W. Both bars emit at 660nm — the deep red wavelength that sits at the peak of the red absorption band for chlorophyll a and b, and the primary photon energy input driving the photosynthetic reactions most relevant to reproductive-stage development. The bar-style form factor distributes photon output linearly across the canopy rather than concentrating it at a single point, reducing hotspot formation and improving uniformity of spectral delivery at the leaf surface.

Thermal management is handled entirely through passive cooling — no fans, no moving parts, no additional noise or vibration load in the production environment. The aluminum bar housing conducts heat away from the diode array passively, maintaining stable operating temperatures without mechanical intervention. Each bar ships with its own plug and operates as an independent power circuit, which means positional flexibility is not constrained by daisy-chain topology. Bars can be repositioned within the canopy footprint, mounted at custom angles, or embedded into compatible Mars Hydro FC and FCE fixtures using the available bracket system.

Control architecture is built around the Mars Hydro iConnect ecosystem. The ADlite Deep Red 30 pairs with the iTime 2-in-1 Smart Timer or iHub, enabling scheduled on/off control through the MarsPro App. For the flowering phase, the recommended protocol is to synchronize the ADlite Deep Red 30 with the primary fixture's photoperiod — typically 12 hours ON / 12 hours OFF — so the 660nm channel tracks the active photosynthetic window without requiring manual adjustment each cycle. A complete four-channel ADlite deployment (UV + IR + Red + Blue) requires only two iTime units to manage the full set, reducing controller overhead in multi-bar configurations. In practical terms, the ADlite Deep Red 30 delivers 30W of 660nm deep red output across two passively cooled, independently powered bars, schedulable via the MarsPro App through a single iTime smart timer connection.

Commercial Assurance

• Authorized Distribution: Cannafull Spectrum Solutions is a factory-authorized dealer for Mars Hydro ADlite supplemental fixtures. Every unit ships with full manufacturer support eligibility.
• Warranty Status: Warranty terms for the ADlite Deep Red 30 are not specified in current manufacturer source data. Contact Cannafull Spectrum Solutions at support@cannafullspec.com for current warranty documentation before purchase.
• Compatibility Assurance: The ADlite Deep Red 30 is confirmed compatible with any third-party primary LED grow light and natively integrates with Mars Hydro FC and FCE series fixtures via the bracket system.
• iConnect Ecosystem: Full MarsPro App scheduling functionality is available when paired with the Mars Hydro iTime 2-in-1 Smart Timer or iHub — sold separately or as part of the ADlite Smart Control Kit.
• U.S. Deployment: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. All units are fulfilled from U.S.-based inventory.

System Integration

• Primary Fixture Compatibility: Pairs with any full-spectrum primary LED grow light under 500W, regardless of brand or control architecture.
• iConnect Control: Connects to the Mars Hydro iTime 2-in-1 Smart Timer or iHub for MarsPro App scheduling; two iTime units manage a complete four-channel ADlite set (UV + IR + Red + Blue).
• Bracket Integration: Embeds directly into Mars Hydro FC and FCE series fixtures using the available bracket system, enabling flush supplemental deployment without external mounting hardware.
• Independent Power Architecture: Each bar ships with its own plug and operates as a standalone power circuit — no daisy-chain dependency, no shared load constraints between bars.
• Scalable Deployment: Additional ADlite Deep Red 30 units can be added to expand coverage across multiple production zones without modifying existing control infrastructure.

Facility Integration Data

The following table models electrical load and acquisition cost across fleet deployments of the ADlite Deep Red 30 at MAP pricing of $69.99 per unit, based on a total system draw of 30W per unit and a standard 12-hour flowering photoperiod (4,380 operating hours per year at $0.12/kWh).

Energy cost modeled at $0.12/kWh. Actual utility rates vary by jurisdiction. Fleet pricing reflects MAP; contact Cannafull Spectrum Solutions for volume inquiry.

Operator Field Note

• Photoperiod Synchronization: Set the ADlite Deep Red 30 to match the primary fixture's 12-hour ON / 12-hour OFF flowering schedule via the iTime smart timer — do not run the 660nm channel outside the active photoperiod, as extended far-red-adjacent exposure outside the intended window can interfere with the dark period signal.
• Mounting Position: Bar-style form factor allows overhead, side-mount, or embedded installation; for canopy-level uniformity, distribute bars evenly across the footprint rather than concentrating both bars at a single point above the canopy center.
• Independent Power Circuits: Each bar has its own plug — verify that the outlet configuration in your production zone can accommodate both bars on separate circuits or a shared circuit with adequate amperage headroom at 15W per bar.
• iTime Controller Efficiency: If deploying a full four-channel ADlite set (UV30 + IR15 + Red30 + Blue30), only two iTime units are required to manage all eight bars — plan controller placement accordingly to minimize cable run length.
• Compatibility Verification: The ADlite Deep Red 30 is confirmed compatible with any primary fixture brand; if embedding into Mars Hydro FC or FCE series fixtures, confirm bracket system availability for your specific fixture model before installation.
• Warranty Documentation: Warranty terms are not specified in current source data — retain purchase confirmation and contact Cannafull Spectrum Solutions for manufacturer warranty documentation prior to deployment in a production environment.

Operator FAQ

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, or international addresses cannot be fulfilled.
• Fulfillment: Orders are processed from U.S.-based inventory. Estimated transit times are provided at checkout based on destination. Cannafull Spectrum Solutions is not responsible for carrier delays outside our fulfillment control.
• Returns: Returns are accepted in accordance with the Cannafull Spectrum Solutions Return Policy. Items must be in original, uninstalled condition with all original packaging. Contact support@cannafullspec.com to initiate a return authorization before shipping any unit back.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about your order? Contact Cannafull Spectrum Solutions at support@cannafullspec.com or visit cannafullspec.com/pages/contact.

What's in the Box

• 2x ADlite Deep Red 30 light bars (660nm, 15W per bar)
• 2x Independent power plugs (one per bar, as confirmed in manufacturer source data)

Note: The iTime 2-in-1 Smart Timer and iHub are not included with the ADlite Deep Red 30 standalone unit. Smart timer control requires separate purchase of the iTime or iHub, or selection of the ADlite Smart Control Kit. Bracket hardware for FC/FCE fixture integration is not confirmed as included — verify with Cannafull Spectrum Solutions before ordering if embedded installation is planned. Box contents are based on confirmed manufacturer source data; dimensions and weight are not specified in current source data.

Regional Compliance & Deployment Notes

• U.S. Distribution Only: The ADlite Deep Red 30 is distributed by Cannafull Spectrum Solutions exclusively within the contiguous 48 United States. No shipments to Canadian provinces or international destinations.
• Electrical Compliance: Installation must comply with all applicable local, state, and federal electrical codes. The ADlite Deep Red 30 is independently powered via its own plug — no hardwiring is required under standard deployment configurations.
• Facility Licensing: Operators are solely responsible for ensuring that supplemental lighting deployment complies with all applicable state and local cannabis cultivation licensing requirements, canopy measurement regulations, and facility inspection standards in their jurisdiction.
• Certification Status: Electrical certification data (UL, ETL, CE, or equivalent) is not specified in current manufacturer source data for the ADlite Deep Red 30. Contact Cannafull Spectrum Solutions at support@cannafullspec.com for current certification documentation if required for facility compliance review.
• Thermal & HVAC: At 30W total draw, the ADlite Deep Red 30 contributes a negligible thermal load in most production environments. Operators running sealed or tightly climate-controlled facilities should verify aggregate supplemental fixture load against HVAC capacity baselines before scaling fleet deployment.