Harvest Right Medium Freeze Dryer Silicone Molds Set of 5 | 84 Freeze-Ready Sections

Precision Control in Any Space

Every operator running a lyophilization line eventually confronts the same silent cost: portion variance. When fill volumes are inconsistent from section to section, sublimation rates diverge, cycle times stretch unpredictably, and the finished product exits the chamber with uneven moisture content and irregular unit weight. That variance compounds across every tray, every batch, every run — and it never announces itself until the output fails a quality check or a client rejects a lot. The enemy is not the freeze dryer. The enemy is the absence of a controlled, repeatable portioning interface between the operator and the machine.

After deployment, the production floor looks different. Each mold drops into the large Harvest Right freeze dryer tray and fills the available surface area with 84 discrete, dimensionally identical sections. Every section receives the same volume. Every section presents the same surface area to the sublimation front. Cycle-to-cycle output becomes predictable enough to schedule around — batch processing shifts from an estimate to a production commitment, and shelf-stable finished units exit the chamber with consistent geometry and moisture profile across the entire tray.

The mechanism is the material and the geometry working together. Each mold is constructed from food-grade premium silicone — BPA-free, thermally stable across the extreme temperature range of a full freeze-dry cycle, and flexible enough to release product cleanly without tools or force. The 84-section array is dimensioned at 1 inch by 1 inch per section, each holding approximately 1 tablespoon of feedstock. The mold set is sized to fit precisely inside large Harvest Right freeze dryer trays, eliminating gap losses and tray-edge waste that reduce effective batch capacity. The full set ships at 5.0 lb and includes 5 or 6 molds, providing immediate multi-tray coverage for operators running medium or large PRO units. In practical terms, the Harvest Right Silicone Food Mold Medium Set of 5 delivers 84 uniform approximately 1-tablespoon sections per mold across a tray-matched footprint engineered for the full thermal and vacuum conditions of pharmaceutical-grade lyophilization cycles.

Where This Belongs (and Doesn't)

This accessory is a portioning and batch-management tool. It does not modify freeze dryer electrical, vacuum, or refrigeration systems. All installation and operational decisions remain the responsibility of the qualified facility operator. Verify tray compatibility with your specific Harvest Right unit model before deployment.

How It Works

The operational logic of this mold set is straightforward: it converts an open freeze dryer tray into a precision batch matrix. The operator fills each of the 84 sections — each measuring 1 inch by 1 inch and holding approximately 1 tablespoon of feedstock — then places the loaded mold directly into the large Harvest Right freeze dryer tray. The mold's dimensional footprint is matched to the tray interior, so the sections fill the available surface area without repositioning or shimming. Once the chamber door closes and the Smart Freeze™ cycle initiates, the silicone material performs passively: it conducts the thermal load of the freezing phase, withstands the vacuum and temperature extremes of the sublimation phase, and releases the finished lyophilized units cleanly when the cycle completes.

The material selection is the critical engineering decision. Food-grade premium silicone maintains dimensional stability across the full temperature range encountered during lyophilization — from the initial freeze-down through the primary and secondary drying phases — without off-gassing, deforming, or bonding to the product. BPA-free construction satisfies food-contact safety requirements for operators processing consumable products. The flexibility of the silicone matrix allows the operator to demold finished units by hand without tools, preserving the structural integrity of fragile lyophilized pieces that would fracture under rigid-mold extraction force. Cleanup is straightforward: the material releases residue without soaking and tolerates the cleaning protocols standard in food-processing environments. In practical terms, the Harvest Right Silicone Food Mold Medium Set of 5 processes up to 84 uniform sections per mold per cycle, with full thermal compatibility across the lyophilization envelope and tool-free product release at cycle completion.

Commercial Assurance

Cannafull Spectrum Solutions supplies this accessory as a factory-authorized dealer of Harvest Right equipment and accessories. Every unit ships as a genuine OEM component verified for compatibility with Harvest Right medium and large PRO freeze dryer tray systems.

• OEM Compatibility: Engineered and dimensioned by Harvest Right for direct fit into large freeze dryer trays — no modification required.
• Material Certification: Food-grade premium silicone, BPA-free, verified for food-contact applications throughout the lyophilization process.
• Thermal Qualification: Rated to withstand the full range of temperatures and vacuum conditions present during a complete freeze-dry cycle.
• Warranty: Warranty terms are governed by Harvest Right's current published warranty policy. Contact Cannafull Spectrum Solutions at the address below to initiate any warranty or defect claim.
• Authorized Channel: Purchased through Cannafull Spectrum Solutions, this accessory is supported by our commercial operator service team for order, logistics, and compatibility questions.

System Integration

• Tray Interface: Molds are dimensioned for direct placement inside large Harvest Right freeze dryer trays — no cutting, trimming, or tray modification required before loading.
• Cycle Compatibility: Silicone construction is thermally and mechanically compatible with the full Smart Freeze™ automated cycle, including freeze-down, primary sublimation, and secondary drying phases.
• Multi-Unit Scaling: With 5 or 6 molds per set, operators running multi-tray chambers can load an entire chamber in a single prep operation, supporting production redundancy across parallel freeze dryer units.
• Post-Cycle Handling: Flexible silicone matrix allows tool-free demolding of finished lyophilized units, reducing post-cycle handling time and minimizing product loss from fragile batch structures.
• Sanitation Protocol: BPA-free food-grade silicone is compatible with standard food-processing sanitation procedures, supporting rapid turnaround between batch processing runs.

Facility Integration Data

The table below models accessory investment against active freeze dryer fleet size for operators evaluating mold set requirements across scaled lyophilization operations.

Operator Field Notes

• Pre-Load Verification: Confirm tray fit before first production run — molds are dimensioned for large Harvest Right freeze dryer trays; verify your unit's tray format matches before loading feedstock.
• Fill Discipline: Each section holds approximately 1 tablespoon. Overfilling sections above the rim will cause product to bridge between sections during freezing, compromising batch separation and unit-dose consistency.
• Liquid Feedstock Protocol: For liquid and semi-liquid feedstocks (smoothies, jello, yogurt, pudding), pre-freeze the loaded mold on a level surface before transferring to the freeze dryer tray to prevent section-to-section spillover during chamber loading.
• Demolding Technique: Apply gentle flex pressure from the underside of the mold to release finished lyophilized units. Do not use rigid tools against the section walls — silicone flex is the release mechanism.
• Sanitation Interval: Clean molds between batch runs using food-safe cleaning protocols. The silicone surface does not require extended soaking; residue releases readily under standard wash conditions.
• Fleet Inventory: For multi-unit operations, maintain one mold set per active freeze dryer unit plus a minimum 10% reserve inventory to cover cleaning cycles and prevent production gaps between consecutive batch runs.

Operator FAQ

Shipping & Logistics

• Shipping Jurisdiction: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this region cannot be fulfilled through this channel.
• Lead Time: Lead time for this accessory is an operational variable not published in the manufacturer's technical specification. Contact Cannafull Spectrum Solutions directly for current lead time and availability before placing fleet-scale orders.
• Returns: Returns are subject to the Cannafull Spectrum Solutions Return Policy. Contact our team within the applicable return window with your order number and reason for return before shipping any product back.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

For order support, compatibility questions, or fleet procurement inquiries: contact Cannafull Spectrum Solutions at cannafullspec.com.

What's in the Box

• 5 or 6 food-grade premium silicone molds (quantity per manufacturer specification)
• Each mold contains 84 sections, each measuring 1 inch by 1 inch with approximately 1-tablespoon capacity

Note: Box contents are confirmed from manufacturer-published specification data. Freeze dryer trays, freeze dryer units, and any other accessories are sold separately. The mold quantity of "5 or 6" is preserved verbatim from the manufacturer's published data; no inference regarding exact count has been made. Verify contents upon receipt and contact Cannafull Spectrum Solutions immediately if shipment does not match the published specification.

Regional Compliance & Deployment Notes

• Shipping Region: Available for deployment in licensed commercial facilities across the contiguous 48 United States. No shipments to Alaska, Hawaii, U.S. territories, or international destinations.
• Prop 65 Status: Prop 65 warning is not required for SKU N-HR-MLD-M per manufacturer-published data. This designation is based on the manufacturer's current compliance assessment and is subject to change. Operators in California should verify current Prop 65 status at time of purchase.
• Hazardous Material Classification: This product is not classified as a hazardous material per manufacturer-published data. Standard ground shipping applies.
• Food Contact Compliance: Constructed from BPA-free food-grade premium silicone. Operators are responsible for verifying that this material designation satisfies the food-contact regulatory requirements applicable to their specific facility, jurisdiction, and product type.
• Electrical Certifications: ETL and UL certifications are not applicable to this non-electrical accessory. No electrical compliance review is required for deployment.
• Facility Regulatory Responsibility: Compliance with all applicable federal, state, and local regulations governing food processing, lyophilization operations, and commercial facility standards remains the sole responsibility of the purchasing operator.

Compliance data sourced from manufacturer-published specification as of the date of this listing. Regulatory classifications are subject to change. Cannafull Spectrum Solutions makes no representation regarding the suitability of this product for any specific regulated application. Operators should conduct independent compliance verification prior to deployment in regulated production environments.