Alien 水培文丘里管配件

SKU: BD100-6003  |  Compatible System: V-SYSTEM  |  Price: $11.40 USD

Precision Control in Any Space

Every irrigation system has a weak point, and in most V-SYSTEM builds that weak point is the connection between the reservoir and the pot. When that interface is improvised — wrong fittings, mismatched bulkheads, components sourced outside the system architecture — the result is feed inconsistency that compounds across every cycle. Nutrient solution reaches some containers at the right concentration and pressure; others receive diluted flow, air gaps, or interrupted delivery. The operator adjusts, compensates, and re-adjusts, burning time and inputs on a problem that should not exist. The silent cost is not any single failed cycle — it is the cumulative variance that makes repeatable output impossible.

After integrating the correct system-native fitting, the irrigation circuit behaves as designed. Each pot in the V-SYSTEM array receives the same nutrient solution concentration and the same air injection at the same pressure, cycle after cycle. The reservoir feeds the system; the system feeds the canopy; the operator manages the process rather than fighting the hardware. Feed schedules hold. Drain-to-waste volumes become predictable. The variables that previously required constant manual intervention are removed from the equation entirely.

The Venturi Fitting (BD100-6003) achieves this by functioning as a venturi bulkhead fitting — a geometry-driven mechanism that uses differential pressure within the irrigation line to simultaneously inject nutrient solution and entrain air into each individual V-SYSTEM pot. There are no moving parts, no external power requirement, and no secondary injection hardware needed. The fitting is a single, system-qualified component that performs two delivery functions — liquid and gas — through one installation point per container. In practical terms, the Venturi Fitting delivers combined nutrient and air injection at the pot level within the V-SYSTEM architecture at a per-unit cost of $11.40 USD.

Where This Belongs (and Doesn't)

The Venturi Fitting is a system-specific component engineered for V-SYSTEM hydroponic configurations. It is not a universal bulkhead fitting and is not rated or warranted for use outside the V-SYSTEM platform. Do not substitute this fitting in non-compatible reservoir or irrigation architectures. Verify system compatibility before installation.

How It Works

The Venturi Fitting operates on the venturi principle: as irrigation solution moves through the constricted geometry of the fitting, fluid velocity increases and local pressure drops. That pressure differential draws air into the flow stream through a secondary inlet, producing a combined nutrient-and-air delivery at the outlet — the point where the fitting interfaces with the V-SYSTEM pot. The result is simultaneous liquid feed and oxygenation at the root zone without a separate air pump or injection manifold at the container level.

Installation is a bulkhead mount directly into the V-SYSTEM pot wall. The fitting seats at the container interface point specified in the V-SYSTEM build, creating a sealed, system-native connection between the irrigation line and the growing container. Because the venturi effect is passive — driven entirely by the pressure and flow rate already present in the V-SYSTEM reservoir circuit — the fitting adds no electrical load and introduces no additional failure modes beyond the fitting itself. In practical terms, the Venturi Fitting delivers passive dual-function injection (nutrient solution and air) at each V-SYSTEM pot position through a single bulkhead installation point, with no auxiliary power or secondary hardware required per container.

Commercial Assurance

System Integration

• V-SYSTEM Compatibility: Designed and qualified exclusively for Alien Hydroponics V-SYSTEM hydroponic configurations — installs at the system-specified bulkhead position on each pot.
• Irrigation Circuit Role: Functions as the terminal delivery point in the top-feed or drain-to-waste line, converting reservoir pressure into per-container nutrient and air injection.
• Passive Operation: No electrical connection, no secondary pump, and no additional manifold hardware required at the container level — the venturi effect is driven by existing system flow.
• Scalability: One fitting per pot; fleet-scale installations require one unit per container position, making quantity planning straightforward for multi-site or multi-room builds.
• Replacement Protocol: Direct OEM replacement for worn or damaged venturi fittings in existing V-SYSTEM installations — no system modification required.

Facility Integration Data

The table below provides fleet-scale quantity and cost reference for V-SYSTEM installations requiring Venturi Fittings at a per-unit price of $11.40 USD (SKU: BD100-6003). One fitting is required per pot position.

Operator Field Notes

• One fitting, one pot: Each V-SYSTEM container requires its own Venturi Fitting — do not attempt to split a single fitting across multiple pot positions or use a single fitting to serve a manifold not designed for it.
• System pressure matters: Venturi function is dependent on adequate flow rate and pressure from the reservoir circuit. Verify that your V-SYSTEM pump and line sizing meet the pressure requirements specified in the V-SYSTEM build documentation before installation.
• OEM replacement only: Substituting non-Alien Hydroponics fittings at the venturi position introduces dimensional and flow-rate variables that the V-SYSTEM was not designed to accommodate. Use BD100-6003 for all replacement and expansion installations.
• Inspect at each cycle: Check fittings for mineral scale accumulation at the venturi inlet and outlet during routine reservoir maintenance. Blockage at the air inlet port will reduce or eliminate the air-injection function without affecting liquid delivery — a failure mode that may not be immediately visible in plant response.
• Stocking recommendation: For operational continuity, maintain a minimum spare inventory of 10–15% of installed fitting count. At $11.40 per unit, the carrying cost of a spare set is low relative to the downtime risk of a mid-cycle fitting failure.

Operator FAQ

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this territory cannot be fulfilled through this listing.
• Fulfillment: Standard order processing and carrier transit times apply. Contact Cannafull Spectrum Solutions for current lead time and shipping rate information prior to placing large-quantity orders.
• Returns: Defective or damaged items are handled under Cannafull Spectrum Solutions return procedures. Contact support with order documentation and a description of the defect before returning any item.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Technical or order support: contact Cannafull Spectrum Solutions directly through the store contact page or listed support channels.

What's in the Box

• 1x Alien Hydroponics Venturi Fitting — SKU BD100-6003

Box contents confirmed from available source data. Accessory hardware, installation instructions, or additional components are not confirmed in source documentation. Verify complete kit contents with Cannafull Spectrum Solutions or Alien Hydroponics if full accessory inclusion is required for your installation.

Regional Compliance & Deployment Notes

• Jurisdiction: This product is available for purchase and shipment within the contiguous 48 United States only through Cannafull Spectrum Solutions.
• Regulatory Classification: The Venturi Fitting is a hydroponic irrigation component. It is not subject to electrical safety certification requirements. Operators are responsible for ensuring that the broader V-SYSTEM installation in which this fitting is used complies with all applicable local, state, and facility-level regulations governing hydroponic operations.
• Facility Compliance: Licensed cultivation facilities should verify that all irrigation system components, including this fitting, are documented in facility equipment records as required by applicable state licensing frameworks.
• No Canadian Distribution: Cannafull Spectrum Solutions does not ship to Canadian provinces. This listing does not reference or imply compliance with Health Canada regulations or CSA certification standards.

Product specifications, warranty terms, and compliance requirements are subject to change by the manufacturer without notice. Cannafull Spectrum Solutions makes no independent warranty claims beyond those issued by Alien Hydroponics. Confirm current specifications and warranty terms at point of purchase. All pricing reflects current MAP of $11.40 USD per unit (SKU: BD100-6003) and is subject to change.