Alien 水培罐连接器 直型 32 毫米

Quick Spec: Connector Type: Straight  |  Size: 32mm  |  Compatibility: V-SYSTEM  |  SKU: BD101-0035  |  Price: $13.60 USD

Precision Control in Any Space

Every unplanned leak, every slow drip from a mismatched fitting, every feed cycle interrupted by a connector that was never designed for your system — these are not minor inconveniences. They are compounding operational failures. A single compromised connection point in a reservoir circuit can skew nutrient delivery across an entire run, introduce oxygen into lines that should stay sealed, and force manual intervention at the worst possible moment. The enemy is not a single catastrophic failure; it is the slow, invisible erosion of consistency that comes from using components that were never engineered to work together.

After deploying the correct fitting, the irrigation circuit behaves as designed. Reservoir connections hold pressure without weeping. Feed schedules run uninterrupted. Nutrient solution reaches every site at the concentration and volume the system was calibrated to deliver. Operators stop chasing wet spots and start reading data. The reservoir becomes a controlled input, not a liability.

The Tank Connector Straight 32mm achieves this by providing a manufacturer-matched, straight-profile fitting at the 32mm bore specification required by V-SYSTEM reservoirs. The straight connector geometry eliminates the angular stress and flow restriction introduced by angled or adapted alternatives, maintaining laminar flow characteristics through the connection point. Compatibility with the V-SYSTEM is a verified claim, not an assumption — this fitting is part of the same product line it serves. In practical terms, the Tank Connector Straight 32mm delivers a sealed, flow-consistent 32mm connection point within any V-SYSTEM reservoir circuit at a per-unit cost of $13.60 USD.

Where This Belongs (and Doesn't)

This fitting is a fluid-transfer component rated for hydroponic nutrient solution service within V-SYSTEM configurations. It is not an electrical component and carries no circuit or HVAC classification. Installation should follow V-SYSTEM assembly documentation. Consult your system manufacturer's guidelines before modifying existing reservoir plumbing in pressurized or recirculating circuits.

How It Works

The Tank Connector Straight 32mm is a single-piece straight-profile fitting machined to a 32mm bore specification. The straight geometry creates a direct, unobstructed fluid path between the reservoir wall and the connected feed or drain line. Unlike angled fittings or improvised adapters, the straight profile does not introduce directional stress at the tank wall penetration point, which is the most common site of seal failure in reservoir assemblies under repeated thermal cycling and nutrient solution exposure.

The 32mm size designation is a hard specification, not a nominal or approximate measurement. V-SYSTEM reservoirs are engineered to accept this exact bore at designated connection ports, which means the fitting seats fully and seals against the tank wall without requiring thread tape, sealant compounds, or secondary reinforcement under normal operating conditions. The result is a connection that performs identically at installation and after extended service cycles.

Compatibility with the V-SYSTEM is a manufacturer-verified claim. This connector is part of the same product line as the reservoirs it serves, which means dimensional tolerances, material compatibility with hydroponic nutrient solutions, and thread or compression engagement specifications are matched at the design level rather than approximated in the field. In practical terms, the Tank Connector Straight 32mm delivers a manufacturer-matched, straight-profile 32mm connection point for V-SYSTEM reservoirs, eliminating the dimensional mismatch and seal degradation associated with non-OEM fittings.

System Integration

• Installs directly into V-SYSTEM reservoir connection ports at the 32mm bore specification — no modification to the reservoir required
• Straight connector profile maintains unobstructed flow path from reservoir to feed or drain line, supporting consistent nutrient delivery in top-feed and drain-to-waste circuits
• Material and dimensional tolerances are matched to V-SYSTEM reservoir specifications at the manufacturer level, eliminating field-fit uncertainty
• Functions as a replacement or additional connection point in existing V-SYSTEM assemblies without requiring full system disassembly
• Compatible with standard hydroponic tubing and fittings at the 32mm interface — verify downstream component bore specifications before assembly

Facility Integration Data

For operators managing multiple V-SYSTEM reservoirs across a facility, the per-unit cost of $13.60 USD makes proactive connector replacement and redundant inventory a low-cost operational decision relative to the cost of an unplanned feed interruption.

Operator Field Note

• Verify the connection port bore on your specific V-SYSTEM reservoir model before ordering — the 32mm specification is a hard dimension, and forcing an incorrect size will damage the tank wall seat
• Inspect the tank wall seat and any existing thread or compression engagement surface for damage or residue from previous fittings before installing a new connector
• Do not apply thread sealant compounds unless the V-SYSTEM assembly documentation for your specific reservoir model explicitly calls for it — unnecessary sealant can interfere with the designed engagement and complicate future servicing
• Maintain at least one spare connector per active reservoir in your facility inventory — at $13.60 USD per unit, the cost of a spare is negligible relative to the cost of a delayed feed cycle while waiting for a replacement to ship
• When replacing a connector mid-cycle, fully drain the affected reservoir before disassembly to prevent nutrient solution contamination of the grow environment
• Document connector installation dates per reservoir as part of your preventive maintenance log — consistent replacement intervals reduce the probability of seal degradation becoming a feed-consistency variable

Operator FAQ

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this territory cannot be fulfilled.
• Fulfillment: Orders are processed and shipped from our fulfillment operation. Estimated lead times are provided at checkout and are subject to carrier conditions. Contact us for time-sensitive procurement inquiries.
• Returns: Returns are accepted subject to our Return Policy. Items must be in original, uninstalled condition. Contact Cannafull Spectrum Solutions within the applicable return window to initiate a return authorization.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about this order? Contact Cannafull Spectrum Solutions directly before purchasing — we confirm compatibility, lead times, and warranty terms for every V-SYSTEM component inquiry.

What's in the Box

• 1x Tank Connector Straight 32mm (SKU: BD101-0035)

Box contents are based on available manufacturer source data. Additional hardware, seals, or installation accessories are not confirmed as included. Verify complete kit contents with Cannafull Spectrum Solutions or the manufacturer before assuming any ancillary components are supplied. Installation documentation, if required, should be sourced from the V-SYSTEM assembly guide for your specific reservoir model.

Regional Compliance & Deployment Notes

• The Tank Connector Straight 32mm is a passive fluid-transfer fitting with no electrical, pressure-vessel, or structural classification. It is not subject to electrical code compliance requirements.
• Operators in licensed cultivation facilities should confirm that any modification to reservoir plumbing is consistent with their facility's standard operating procedures and any applicable state-level cultivation license conditions.
• This product is sold for use in hydroponic irrigation systems within licensed agricultural and cultivation operations across the United States. End-use compliance with applicable state and local regulations is the responsibility of the purchasing operator.
• Cannafull Spectrum Solutions ships within the contiguous 48 United States only. No international fulfillment is available for this product.
• No federal, state, or third-party certification data is specified in available source documentation for this component. Contact the manufacturer directly if certification documentation is required for your facility's compliance records.

Compliance requirements vary by state and license type. The information provided here is for general operational reference only and does not constitute legal or regulatory advice. Operators are responsible for confirming that all equipment and installation practices meet the requirements of their specific jurisdiction and license conditions. Cannafull Spectrum Solutions makes no representation regarding the regulatory status of this product in any specific state or municipality beyond its classification as a passive hydroponic fitting component.