Alien 水培弯头 5 英寸螺纹双流

SKU: BD101-0019  |  Connection Type: Patent-pending Dual-Flow™ fitting  |  Compatible System: V-SYSTEM  |  Price: $40.63 USD

Precision Control in Any Space

Every irrigation row has a weak point, and in most facilities that weak point is the end. When the final pot in a V-SYSTEM row terminates through a non-integrated fitting — a generic elbow, a field-fabricated adapter, or a stopgap connection sourced outside the system — the return line becomes a liability. Flow backs up, pressure differentials develop across the row, and the uniform feed delivery the entire upstream system was designed to produce gets undermined at the last connection. The cost is invisible on any single run but compounds across every cycle: inconsistent drain volumes, variable root-zone saturation, and the kind of crop variance that cannot be corrected at harvest.

After deployment, the row closes cleanly. The 5" return line receives flow through a fitting that was engineered specifically for this transition point — not adapted from a generic plumbing catalog. Feed volumes remain consistent from the first pot to the last. Drain-to-waste volumes are predictable. The system operates as a single hydraulic unit rather than a series of components that happen to be connected, and the operator's attention shifts from troubleshooting fittings to managing production outcomes.

The mechanism is the Dual-Flow™ fitting geometry itself. The patent-pending design addresses the specific hydraulic demands of the V-SYSTEM row termination: connecting the last pot in the row to the 5" return line through a fitting that manages bidirectional flow dynamics at the elbow transition rather than forcing return-line flow through a geometry optimized for something else. This is not a universal fitting applied to a specialized application — it is a component designed within the V-SYSTEM product line to complete the system's hydraulic circuit as the manufacturer intended. In practical terms, the Elbow 5" Threaded Dual-Flow delivers a purpose-engineered V-SYSTEM row termination via patent-pending Dual-Flow™ fitting geometry at the 5" return line interface, SKU BD101-0019, priced at $40.63 USD.

Where This Belongs (and Doesn't)

This fitting is a V-SYSTEM-specific component. Installation and system configuration should follow Alien Hydroponics V-SYSTEM documentation. Consult a qualified irrigation technician for facility-scale row layout and return-line sizing. Cannafull Spectrum Solutions does not provide hydraulic engineering services.

How It Works

The Elbow 5" Threaded Dual-Flow operates at the hydraulic boundary between the V-SYSTEM pot row and the facility's return infrastructure. At this transition point, the fitting must simultaneously manage the outflow from the final pot position and the directional change required to route drain water into the 5" return line — two functions that a standard elbow fitting handles sequentially rather than as an integrated hydraulic event. The patent-pending Dual-Flow™ design addresses both functions within a single fitting body, using a geometry that accommodates the flow characteristics specific to V-SYSTEM row termination rather than approximating them through a generic adapter.

The threaded connection interface provides a secure, repeatable seal at the row termination point. Threaded engagement eliminates the compression-fit variability that contributes to slow leaks and fitting displacement under the cyclic pressure changes inherent in timed top-feed irrigation schedules. The 5" specification matches the V-SYSTEM return line diameter directly, ensuring that the fitting does not introduce a flow restriction or diameter mismatch at the point where return-line velocity is highest — the row outlet. In practical terms, the Elbow 5" Threaded Dual-Flow delivers a patent-pending Dual-Flow™ threaded termination at the V-SYSTEM row-to-5"-return-line interface, SKU BD101-0019, as a purpose-built component within the Alien Hydroponics V-SYSTEM product line.

Commercial Assurance

System Integration

• V-SYSTEM Compatibility: Designed and specified as a component within the Alien Hydroponics V-SYSTEM product line — not a third-party adapter.
• Return Line Interface: Connects directly to the 5" V-SYSTEM return line at the row termination point using a threaded engagement interface.
• Dual-Flow™ Fitting: Patent-pending Dual-Flow™ geometry manages the hydraulic transition from row outlet to return line within a single fitting body.
• Drain-to-Waste Compatibility: Suitable for drain-to-waste irrigation configurations where consistent return-line flow and row termination integrity are operational requirements.
• Row Position: Installed at the final pot position in a V-SYSTEM row — not a mid-row or inlet-side component.

Facility Integration Data

The following table provides a reference framework for procurement planning across V-SYSTEM row configurations of varying scale. Unit pricing is based on the current MAP of $40.63 USD per fitting (SKU: BD101-0019). Dimensions and weight are not specified in current source data and should be confirmed with Cannafull Spectrum Solutions prior to freight planning for large-quantity orders.

Operator Field Notes

• Install at Row Termination Only: This fitting is specified for the final pot position in a V-SYSTEM row. Installing it at a mid-row position will disrupt flow distribution across the row and is outside the manufacturer's intended application.
• Verify Return Line Diameter Before Ordering: Confirm your V-SYSTEM return line is the 5" specification before procurement. This fitting is not designed for smaller-diameter return lines used in other Alien Hydroponics configurations.
• Threaded Interface Requires Clean Engagement: Inspect threads on both the fitting and the return line connection point before installation. Cross-threading or debris in the thread engagement will compromise the seal and introduce leak risk under cyclic irrigation pressure.
• One Fitting Per Row: Each V-SYSTEM row requires one Elbow 5" Threaded Dual-Flow at its termination point. Procurement quantities should match total row count in the facility layout.
• Patent-Pending Status: The Dual-Flow™ fitting design carries patent-pending status. Do not attempt to replicate or substitute with field-fabricated alternatives — hydraulic performance equivalence cannot be assumed.
• Replacement Inventory: Operators running high-cycle irrigation schedules should maintain at least one spare fitting per active room. Fitting failure at row termination will take the entire row offline until replaced.

Operator FAQ

Shipping & Logistics

• Shipping Jurisdiction: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this jurisdiction cannot be fulfilled through this channel.
• Freight Notes: Dimensions and weight for SKU BD101-0019 are not specified in current source data. Contact Cannafull Spectrum Solutions prior to placing large-quantity orders to confirm freight classification and packaging specifications.
• Returns: Returns are subject to Cannafull Spectrum Solutions return policy terms. Contact the support team within the applicable return window with order documentation and reason for return.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

For order inquiries, freight questions, or pre-purchase configuration support: contact Cannafull Spectrum Solutions directly via cannafullspec.com.

What's in the Box

• 1x Alien Hydroponics Elbow 5" Threaded Dual-Flow fitting (SKU: BD101-0019)

Note: Packaging contents are based on available source data for SKU BD101-0019. No additional hardware, documentation, or accessories are confirmed in current source data. If your order arrives with missing or damaged components, contact Cannafull Spectrum Solutions immediately with your order number and photographic documentation of the received shipment.

Regional Compliance & Deployment Notes

• U.S. Deployment: The Elbow 5" Threaded Dual-Flow is available for deployment in licensed cultivation facilities across the contiguous United States through Cannafull Spectrum Solutions' authorized distribution channel.
• Regulatory Scope: This product is an irrigation system fitting component. It does not carry electrical, photobiological, or emissions certifications. Compliance obligations for the broader V-SYSTEM installation — including facility plumbing codes and water discharge regulations — are the responsibility of the licensed operator and their qualified installation contractors.
• Patent Status: The Dual-Flow™ fitting design is patent-pending under Alien Hydroponics intellectual property. Operators and facility contractors should not attempt to replicate this fitting geometry for procurement or fabrication purposes.
• Jurisdiction Limitation: Cannafull Spectrum Solutions does not ship to Canadian provinces or territories. All orders must originate from and ship to addresses within the contiguous 48 United States.
• Operator Responsibility: Installation of V-SYSTEM components, including this fitting, should be performed in accordance with Alien Hydroponics V-SYSTEM installation documentation and applicable local plumbing and facility codes. Cannafull Spectrum Solutions does not provide on-site installation services.

Compliance requirements vary by state, county, and facility license type. The information provided here is for general reference only and does not constitute legal, regulatory, or engineering advice. Licensed operators are responsible for verifying that all irrigation system components and installation practices meet the requirements of their applicable jurisdiction and facility operating license. Cannafull Spectrum Solutions makes no representations regarding the regulatory status of this product in any specific jurisdiction beyond its role as an authorized dealer of Alien Hydroponics V-SYSTEM components.