Alien 水培弯头 5 英寸带倒刺 带排水点

Quick Spec: Barb Size: 5"  |  Drain Point: Integrated  |  Compatibility: V-SYSTEM  |  SKU: BD101-0018  |  Price: $37.40 USD

Precision Control in Any Space

Every uncontrolled drain point in a top-feed system is a liability waiting to surface. When fittings are sourced from generic suppliers — sized for plumbing applications, not irrigation — operators absorb the cost in slow ways: pooling at the reservoir base, inconsistent drain rates between rows, and the recurring labor of chasing leaks that never fully seal. The enemy is not a single catastrophic failure. It is the accumulated friction of equipment that was never designed to work together, quietly degrading the consistency of every feed cycle.

After integrating a purpose-matched drain fitting into the V-SYSTEM build, the irrigation circuit behaves as a closed, predictable loop. Drain-to-waste routing exits cleanly at a defined point, reservoir levels stabilize between cycles, and the operator stops spending time on plumbing and starts spending time on the crop. The system does what it was designed to do — feed uniformly, drain completely, and repeat without intervention.

The mechanism is straightforward: the Elbow 5" Barbed with Drain Point is engineered specifically for V-SYSTEM compatibility, with a 5" barb specification that mates directly to V-SYSTEM feed and drain lines without adapter fittings or sealant workarounds. The integrated drain point provides a dedicated exit for waste solution, eliminating the need to tee off a separate drain line or rely on gravity routing through an uncontrolled fitting. In practical terms, the Elbow 5" Barbed with Drain Point delivers a single-component drain solution for V-SYSTEM irrigation circuits at a 5" barb interface, purpose-built for drain-to-waste operation.

Where This Belongs (and Doesn't)

This fitting is engineered for V-SYSTEM hydroponic irrigation circuits. It is not a general-purpose plumbing fitting and should not be used in pressurized water supply lines, HVAC drainage, or any application outside its rated irrigation context. Verify V-SYSTEM line diameter compatibility before installation.

How It Works

The Elbow 5" Barbed with Drain Point operates on a single functional principle: route irrigation outflow to a defined, controlled exit point within the V-SYSTEM circuit. The elbow geometry redirects feed or drain flow at a fixed angle, while the integrated drain point provides a secondary outlet specifically for waste solution discharge. This eliminates the need for a separate tee fitting or an improvised drain tap, reducing the total number of connection points in the circuit and the corresponding number of potential leak sites.

The 5" barb specification is the critical interface dimension. It is sized to mate directly with V-SYSTEM-compatible tubing at that diameter, creating a friction-fit connection that holds under normal irrigation operating pressures without requiring clamps or adhesive sealants in standard V-SYSTEM configurations. The drain point is factory-integrated into the elbow body — it is not a field-drilled or aftermarket modification — which means the outlet geometry and wall integrity are consistent across units. In practical terms, the Elbow 5" Barbed with Drain Point provides a two-function fitting — directional flow routing and dedicated drain exit — in a single V-SYSTEM-compatible component at the 5" barb interface.

System Integration

• Integrates directly into V-SYSTEM top-feed and drain-to-waste irrigation circuits at the 5" barb connection point
• Eliminates the need for a separate tee fitting and drain tap by combining elbow geometry and drain point in a single component
• Reduces total fitting count in the drain circuit, lowering the number of potential leak initiation points
• Compatible with V-SYSTEM reservoir and feed line configurations — verify tubing diameter matches 5" barb spec before installation
• Designed for use alongside other Alien Hydroponics V-SYSTEM fittings and reservoir components for a fully matched irrigation circuit

Facility Integration Data

The following table provides fleet-scale cost reference for operators integrating the Elbow 5" Barbed with Drain Point across multiple V-SYSTEM stations. Unit price is $37.40 USD (SKU: BD101-0018).

Operator Field Notes

• Confirm tubing inner diameter matches the 5" barb specification before installation — a mismatched barb-to-tube fit is the primary source of connection failure in irrigation circuits
• The integrated drain point is a factory feature, not a field modification; do not attempt to drill, tap, or modify the elbow body to add additional outlets
• In drain-to-waste configurations, route the drain point outlet to a collection reservoir or drain line before initiating feed cycles — an unrouted drain point will discharge at the fitting location
• Inspect the barb connection for seating depth after initial installation; the tubing should seat fully over the barb shoulder, not rest on the barb tip
• This fitting is a V-SYSTEM component — substituting non-V-SYSTEM fittings at adjacent connection points may introduce diameter mismatches that compromise circuit integrity
• Keep a spare unit on-site in active facilities; a single failed drain fitting can interrupt an entire feed cycle until replaced

Shipping & Logistics

• Shipping Region: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this region cannot be fulfilled.
• Fulfillment: Orders are processed and shipped from our Longmont facility. Contact us for current lead times on this SKU prior to placing time-sensitive orders.
• Returns: Returns are accepted subject to our Return Policy. Items must be in original, uninstalled condition. Contact Cannafull Spectrum Solutions to initiate a return authorization before shipping any product back.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about this order? Contact Cannafull Spectrum Solutions directly before purchasing — we are here to confirm fit, availability, and logistics for your facility build.

What's in the Box

• 1x Alien Hydroponics Elbow 5" Barbed with Drain Point (SKU: BD101-0018)

Box contents reflect confirmed manufacturer source data for SKU BD101-0018. Additional hardware, tubing, or installation accessories are not confirmed as included and are not represented here. Verify complete kit contents with Cannafull Spectrum Solutions if your application requires additional V-SYSTEM components.

Regional Compliance & Deployment Notes

• This product is sold for use in lawful hydroponic irrigation applications within the contiguous 48 United States.
• The Elbow 5" Barbed with Drain Point is a passive irrigation fitting and does not require electrical certification or licensing for installation in standard hydroponic irrigation circuits.
• Operators in licensed cultivation facilities should verify that irrigation system components meet any facility-specific equipment standards required by their state regulatory authority.
• Cannafull Spectrum Solutions does not ship to addresses outside the contiguous 48 United States. Canadian orders, territories, and APO/FPO addresses are outside our current shipping jurisdiction.
• This product is not subject to controlled substance regulations; however, its end-use environment may be. Operators are responsible for maintaining compliance with all applicable state and local regulations governing their cultivation facility.

Compliance requirements vary by state and jurisdiction. The information provided here is for general reference only and does not constitute legal or regulatory advice. Cannafull Spectrum Solutions makes no representations regarding the suitability of this product for any specific regulatory environment. Consult your compliance officer or legal counsel for jurisdiction-specific guidance.