Alien 水培分配三通 40 毫米

SKU: BD101-0014  |  Fitting Size: 40mm  |  System Compatibility: V-SYSTEM  |  Price: $33.90

Precision Control in Any Space

Every uncontrolled junction in an irrigation circuit is a liability. When fittings are sourced outside the native system architecture, flow splits unevenly, connections weep under pressure, and the operator is left chasing root-zone variance that has no visible upstream cause. The cost is not just wasted nutrient solution — it is the compounding inconsistency that makes every harvest cycle harder to read and harder to replicate. Guesswork becomes the operating standard, and equipment that fights the system design becomes the norm.

After integrating a properly specified distribution component into the V-SYSTEM network, the feed circuit behaves as a single engineered unit. Flow divides at the tee junction with the geometry the system was designed around. Reservoir drawdown becomes predictable. Top-feed schedules hold their timing because pressure drop at the distribution point is no longer a variable. The operator stops troubleshooting fittings and starts reading plant response — which is the only data that matters at canopy level.

The Distribution Tee 40mm is a native V-SYSTEM component, sized and rated to interface directly with the 40mm line architecture that defines the V-SYSTEM feed network. Because it is sourced from within the same system family, it eliminates the adapter stack and the leak points that adapters introduce. Compatibility is not approximate — it is specified. The fitting seats into the V-SYSTEM circuit without modification, maintaining the hydraulic integrity of the full irrigation loop from reservoir to drain. In practical terms, the Distribution Tee 40mm delivers a confirmed 40mm native fit within the V-SYSTEM architecture at a single-unit price of $33.90, with no adapter hardware required.

Where This Belongs (and Doesn't)

The Distribution Tee 40mm is a hydraulic fitting component. It is not an electrical component and carries no voltage rating, circuit classification, or HVAC designation. Installation should follow the V-SYSTEM manufacturer's irrigation assembly guidelines. Consult your facility's irrigation system documentation before modifying active feed lines.

How It Works

The Distribution Tee 40mm functions as a flow-splitting junction within the V-SYSTEM irrigation circuit. At the point where a single feed line must divide into two downstream branches — whether to serve separate grow zones, multiple reservoir feeds, or parallel drain-to-waste runs — the tee provides the geometric transition that keeps the hydraulic circuit intact. The 40mm fitting dimension is not a nominal approximation; it is the specified interface size for V-SYSTEM line components, meaning the tee seats and seals against V-SYSTEM tubing and fittings without requiring reducers, bushings, or thread adapters that would otherwise introduce turbulence, leak risk, and pressure loss at the junction.

Because the component is native to the V-SYSTEM product family, the operator does not need to engineer a workaround at the distribution point. The tee is inserted into the feed line according to V-SYSTEM assembly protocol, and the circuit resumes its designed flow characteristics on both downstream branches. This matters in space-constrained installations where the feed line layout cannot accommodate bulky adapter assemblies and where every junction in the circuit is a potential failure point. A native fitting eliminates the failure mode at the source. In practical terms, the Distribution Tee 40mm provides a V-SYSTEM-native 40mm flow-split junction that maintains circuit hydraulic integrity without adapter hardware, at a unit cost of $33.90.

System Integration

• V-SYSTEM Compatibility: Designed and specified for direct integration into V-SYSTEM hydroponic irrigation networks — no adapter hardware required at the 40mm junction
• Top-Feed Circuit Use: Suitable for top-feed irrigation configurations where the main reservoir line must split to serve multiple feed zones
• Drain-to-Waste Architecture: Compatible with drain-to-waste system layouts where distribution uniformity at the tee point directly affects per-site feed volume
• Replacement Integration: Drop-in replacement for existing V-SYSTEM 40mm tee fittings — no circuit redesign required when replacing a worn or failed junction component
• Reservoir Line Routing: Positions within the reservoir-to-canopy feed path at any point where a 40mm line split is required by the facility's irrigation layout

Facility Integration Data

The following table provides fleet-scale procurement reference for facilities integrating the Distribution Tee 40mm across multiple V-SYSTEM irrigation circuits or build-outs requiring redundant tee inventory.

Operator Field Notes

• Verify Line Size Before Ordering: Confirm your V-SYSTEM feed line is running 40mm before purchasing — installing a tee sized outside the native line diameter will require additional fittings and defeats the purpose of a native component
• Native Fit Means No Sealant Required: A properly seated V-SYSTEM tee at the correct size should not require thread tape, sealant, or compression adapters — if it does, the fitting or the line size is mismatched
• Inspect Junction Points on Every Reservoir Refill: Tee fittings are the highest-stress points in a gravity or low-pressure feed circuit — a brief visual check during reservoir maintenance catches early weeping before it becomes a floor event
• Stock One Spare Per Active Circuit: A failed tee junction during an active feed cycle can interrupt the entire downstream branch — keeping one BD101-0014 on the shelf eliminates unplanned downtime from a $33.90 component
• Document Your Tee Positions in the Circuit Diagram: In multi-zone V-SYSTEM builds, mapping each tee location against the reservoir feed path makes troubleshooting flow variance faster and reduces diagnostic time during a cycle

Shipping & Logistics

• Shipping Jurisdiction: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this jurisdiction cannot be fulfilled.
• Fulfillment: The Distribution Tee 40mm (SKU: BD101-0014) ships as a standard parcel. Specific carrier, transit time, and packaging details are confirmed at checkout. Local pickup availability at the Longmont location may be available — contact Cannafull Spectrum Solutions to confirm current pickup status before ordering.
• Returns: Returns are subject to Cannafull Spectrum Solutions' return policy. Contact cannafullspec.com for return authorization procedures before shipping any item back.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about this order? Contact Cannafull Spectrum Solutions at cannafullspec.com.

What's in the Box

• 1x Alien Hydroponics Distribution Tee 40mm (SKU: BD101-0014)

Box contents are confirmed based on available manufacturer data for SKU BD101-0014. Accessory hardware, installation instructions, or supplementary fittings are not confirmed as included. If your application requires specific ancillary components, verify inclusion with Cannafull Spectrum Solutions before ordering.

Regional Compliance & Deployment Notes

• Jurisdiction: This product is available for sale and shipment within the contiguous 48 United States only.
• Regulatory Classification: The Distribution Tee 40mm is an irrigation fitting component. It carries no electrical rating, no voltage classification, and no HVAC designation. It is not subject to electrical code compliance review.
• Facility Compliance: Operators in licensed cultivation facilities should verify that irrigation system modifications — including fitting replacements — are consistent with their facility's standard operating procedures and any applicable state-level cultivation license conditions.
• No Canadian Distribution: Cannafull Spectrum Solutions does not ship to Canadian provinces. No CSA certification or Health Canada compliance language applies to this product listing.
• Installation Responsibility: Proper installation within the V-SYSTEM architecture is the responsibility of the operator. Cannafull Spectrum Solutions recommends following V-SYSTEM manufacturer assembly documentation for all fitting integrations.

Compliance requirements vary by state and facility license type. The information provided here is for general reference only and does not constitute legal or regulatory advice. Operators should consult their compliance officer or legal counsel regarding any facility-specific installation requirements.