AC Infinity TERRAFORM 8 12000 BTU Portable AC | 5-in-1 Auto-Switching

Quick Spec: 12,000 BTU Cooling  |  10,000 BTU Heating  |  1,200 W Max Draw  |  115V / 60 Hz / 10A  |  Unit Dimensions: 15.27″ L × 15.82″ W × 27.71″ H  |  SKU: AC-ACN8

One Duct. Five Modes. Zero Guesswork.

Every uncontrolled swing in temperature or vapor pressure deficit is a silent tax on output quality. When the equipment managing your environment operates as a collection of disconnected units — a portable cooler here, a space heater there, a dehumidifier running on its own schedule — the atmosphere inside your enclosure is never truly governed. It drifts. It spikes. It recovers too slowly. The compressor cycles at the wrong moment, humidity climbs while the room cools, and the operator is left chasing setpoints manually, reacting to conditions that should have been prevented. That reactive loop is not a minor inconvenience; it is a structural source of variance that compounds across every cycle.

After deployment, the picture changes fundamentally. A single unit manages the full atmospheric stack — cooling, heating, dehumidifying, and air circulation — under one coordinated control architecture. The system reads live conditions and transitions between operational modes autonomously, holding temperature and VPD targets without operator input between adjustments. The enclosure maintains a stable, repeatable atmospheric profile from the first day of a cycle to the last, and the operator's attention shifts from reactive troubleshooting to proactive scheduling.

The mechanism behind that outcome is a 12,000 BTU compressor paired with an adaptive AI control layer that monitors temperature, humidity, and VPD simultaneously, switching between Cooling, Heating, Dehumidifying, and Circulation modes as live readings demand. Control resolution is 10 discrete levels across a 61–95°F operating range and 35–85% RH envelope. The unit connects to UIS controllers for WiFi app connectivity, enabling advanced automations, data tracking, alert thresholds, and remote schedule management. Electrical draw peaks at 1,200 W on a 115V AC / 60 Hz / 10A circuit — a single standard outlet. Duct tube lengths of 78.00 in. (198.1 cm) and 66.00 in. (167.6 cm) are included for flexible single-duct routing. In practical terms, the TERRAFORM 8 delivers 12,000 BTU of cooling capacity and 10,000 BTU of heating capacity across enclosures up to 10′×10′ at 1,200 W maximum power draw on a 10A / 115V circuit.

Where This Belongs (and Doesn’t)

Electrical note: The TERRAFORM 8 requires a dedicated 115V AC / 60 Hz / 10A circuit. Do not share the circuit with high-draw lighting or irrigation equipment. Verify circuit capacity with a licensed electrician before installation.

How It Works

The TERRAFORM 8 is built around a 12,000 BTU AC compressor that serves as the thermal engine for the entire atmospheric control ecosystem. Rather than operating as a single-function cooler, the compressor feeds a five-mode control architecture: Cooling, Heating, Dehumidifying, Circulation, and combined auto-switching sequences. The Cortex-layer AI reads live sensor data for temperature, humidity, and VPD simultaneously, then selects and transitions between modes in real time without operator input. This is not a programmable timer — it is a closed-loop feedback system that responds to actual atmospheric conditions inside the enclosure.

Control resolution is 10 discrete levels across the full operating range of 61–95°F and 35–85% RH. The operator sets a target — temperature setpoint or VPD target — and the system executes the mode transitions required to hold that target. When cooling is sufficient, the compressor runs in cooling mode. When the enclosure drops below the heating threshold, the system switches to heating output rated at 10,000 BTU. When humidity rises above the dehumidification threshold, the system prioritizes moisture removal. All transitions occur through one duct, eliminating the need for separate exhaust or intake ports for each function.

UIS integration extends the control architecture beyond the unit itself. Connecting to a UIS controller via the onboard interface unlocks WiFi app connectivity, enabling remote setpoint adjustment, automated scheduling, alert thresholds for out-of-range conditions, and historical data logging for cycle-over-cycle atmospheric analysis. The unit draws a maximum of 1,200 W at 115V AC / 60 Hz / 10A — a single standard circuit. Physical dimensions are 15.27 in. (38.8 cm) length × 15.82 in. (40.2 cm) width × 27.71 in. (70.4 cm) height, with integrated transportation wheels for repositioning. Duct tube lengths of 78.00 in. (198.1 cm) and 66.00 in. (167.6 cm) are included for routing flexibility. In practical terms, the TERRAFORM 8 delivers automated five-mode atmospheric control across enclosures up to 10′×10′ at a maximum electrical load of 1,200 W / 10A on a single 115V outlet.

System Integration

• UIS Ecosystem Compatibility: Connects directly to AC Infinity UIS controllers, enabling WiFi app control, remote setpoint management, automated scheduling, and alert-based notifications for temperature, humidity, and VPD deviations.
• Single-Duct Deployment: All five operational modes — Cooling, Heating, Dehumidifying, Circulation, and auto-switching sequences — route through one duct, minimizing penetration requirements in sealed enclosures.
• Portable Infrastructure: Integrated transportation wheels allow the unit to be repositioned between enclosures or rooms without tools, supporting multi-room operations where climate assets rotate on a schedule.
• Data Architecture: UIS connectivity enables historical atmospheric data logging, providing cycle-over-cycle records of temperature, humidity, and VPD for compliance documentation and production analysis.
• Electrical Footprint: Maximum draw of 1,200 W / 10A on a single 115V / 60 Hz circuit — compatible with standard commercial and residential electrical infrastructure without panel upgrades in most installations.

Operator Field Notes

• Circuit isolation is non-negotiable: The TERRAFORM 8 draws up to 10A at peak load. Sharing a 15A circuit with lighting or irrigation equipment risks nuisance tripping and compressor stress. Dedicate one circuit per unit.
• VPD targeting outperforms temperature-only control: Setting a VPD target rather than a temperature-only setpoint allows the system to coordinate cooling and dehumidification responses simultaneously, producing tighter atmospheric stability across the canopy zone.
• Duct routing affects thermal efficiency: Two duct tube lengths are included — 78.00 in. (198.1 cm) and 66.00 in. (167.6 cm). Use the shortest routing path that clears obstructions; longer duct runs reduce effective heat transfer efficiency at the exhaust point.
• UIS integration should be configured before first cycle: Connecting to a UIS controller and establishing baseline alert thresholds before the first production cycle ensures that out-of-range events are logged and flagged from day one, not discovered after the fact.
• Transportation wheels are load-bearing, not decorative: The integrated wheel system is designed for repositioning on hard, level surfaces. Do not use wheels to move the unit while the compressor is running or within 10 minutes of shutdown.
• Operating envelope boundaries matter: The unit is rated for 61–95°F ambient and 35–85% RH. Operating outside these boundaries — particularly in high-humidity environments above 85% RH — can trigger compressor protection shutdowns. Verify ambient conditions before deployment.

Operator FAQ

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, and international destinations cannot be processed.
• Freight Class: The TERRAFORM 8 ships as a standard parcel. Unit weight is not specified in source data; actual shipping cost will be calculated at checkout based on destination and carrier rates. Contact us for freight quotes on multi-unit orders.
• Returns: Returns are accepted in accordance with the Cannafull Spectrum Solutions Return Policy. Items must be in original, uninstalled condition with all packaging intact. Review full terms at cannafullspec.com/pages/return-policy before ordering.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions before ordering? Contact Cannafull Spectrum Solutions at support@cannafullspec.com or visit cannafullspec.com.

What’s in the Box

• TERRAFORM 8 All-In-One Climate Control Unit (SKU: AC-ACN8)
• Duct Tube — 78.00 in. (198.1 cm)
• Duct Tube — 66.00 in. (167.6 cm)

Box contents are confirmed from available source data. Additional accessories, mounting hardware, or documentation included by the manufacturer will be present in the factory-sealed package. UIS controllers, WiFi adapters, and supplemental sensors are sold separately. Contact Cannafull Spectrum Solutions to confirm current box contents before purchase if complete accessory inventory is required for your installation plan.

Regional Compliance & Deployment Notes

• Electrical Code Compliance: The TERRAFORM 8 operates on 115V AC / 60 Hz / 10A. Installation must comply with the National Electrical Code (NEC) and applicable local electrical codes. A dedicated circuit is required. Verify panel capacity and circuit availability with a licensed electrician before installation.
• Licensed Facility Requirements: Operators deploying this unit in licensed cultivation facilities should verify that climate control equipment specifications meet any applicable state or local facility licensing requirements. Requirements vary by jurisdiction across the United States.
• Operating Environment Limits: The unit is rated for ambient operating temperatures of 61–95°F and relative humidity of 35–85% RH. Deployment in environments outside these parameters may trigger compressor protection responses or void manufacturer support eligibility.
• Shipping Jurisdiction: Available for purchase and delivery within the contiguous 48 United States only through Cannafull Spectrum Solutions.
• UPC for Compliance Documentation: UPC 819137025189 — use this identifier for procurement records, facility equipment logs, and any state-required equipment documentation.

Cannafull Spectrum Solutions provides this product information for reference purposes. Compliance with federal, state, and local regulations governing cultivation facility equipment is the sole responsibility of the purchasing operator. Specifications are sourced from manufacturer data and are subject to change without notice. Verify current specifications with Cannafull Spectrum Solutions before finalizing procurement decisions.