AC Infinity IONBOARD S24 | 全光谱 LED 生长灯 200W | Samsung LM301B | 2x4 英尺覆盖范围

Key Specs: 220W | 2.65 µmol/J | 2 x 4 ft. flower coverage | ETL Listed | 11.46 lbs | 2-Year Warranty

Kill Variance. Print Yield.

Legacy HPS infrastructure doesn't fail loudly — it fails slowly, and it charges you for every hour it does. Lamp lumen output degrades from the moment a bulb fires. Ballasts drift. Manual dimming controls introduce operator-dependent inconsistency that compounds across every room, every cycle, every harvest. The facility running on aging discharge technology isn't just paying an electricity premium — it's absorbing a variance tax on every gram it produces, quietly, invisibly, and without a line item on any P&L.

After deployment, the picture changes. Canopy zones that once showed hot spots and dead zones resolve into a uniform photon field. Intensity levels are programmed once and held automatically across the grow cycle — no manual intervention, no mid-cycle drift, no lamp swap downtime. The facility runs cleaner, cooler, and with a predictable electrical draw that makes HVAC sizing and energy budgeting a deterministic exercise rather than a moving target.

The mechanism behind that outcome is a 220W unibody aluminum board populated with 544 Samsung LM301H diodes across a four-channel spectrum — 660nm deep red, 730nm far-red, 3000K warm white, and 6500K cool white — algorithmically positioned to produce the most uniform PAR map achievable at this form factor. Efficacy is rated at 2.65 µmol/J. The IP-65-sealed driver accepts 100–277V AC input at 50/60 Hz, drawing 1.84A at 120V or 0.92A at 240V, and supports five discrete dimming levels (20/40/60/80/100%) with full UIS ecosystem compatibility for centralized scheduling and intensity programming. In practical terms, the IONBOARD S24 delivers 1,726 PPF (µmol/s) across a 2 x 4 ft. footprint at 220W with a 50,000-hour rated LED lifespan.

Where This Belongs (and Doesn't)

This fixture operates on a standard US plug (NEMA 1-15 Type-A) with a 5 ft. power cord. Verify that your facility's circuit capacity, mounting infrastructure, and HVAC load calculations are validated before deployment. Minimum circuit sizing should account for continuous-load NEC derating at the applicable voltage.

Infrastructure Note: The IONBOARD S24 draws 1.84A at 120V and 0.92A at 240V. Multi-fixture rows should be load-planned against available circuit capacity with NEC continuous-load derating applied. HVAC sizing should account for the fixture's thermal output within the sealed room envelope.

How It Works

The IONBOARD S24 is built on a unibody aluminum chassis — a single-piece thermal management structure that eliminates the junction points and heat accumulation common to multi-component frame assemblies. The board houses 544 Samsung LM301H diodes, a binned LED platform selected for output consistency and long-term lumen maintenance. Diode placement is not uniform-grid — it is algorithmically determined to produce the flattest achievable PAR map across the 2 x 4 ft. coverage zone, minimizing edge falloff and eliminating the intensity peaks that create uneven canopy development in fixed-grid arrays.

The four-channel spectrum — 660nm deep red, 730nm far-red, 3000K warm white, and 6500K cool white — is engineered to support photosynthetic efficiency across all growth stages. The 660nm channel drives peak chlorophyll absorption. The 730nm far-red channel influences photoperiodic response and internode elongation. The 3000K warm white and 6500K cool white channels fill the broadband photosynthetically active radiation (PAR) window, providing the continuous spectral coverage that single-channel or two-channel arrays cannot replicate. The IP-65-rated driver (AC Infinity Proprietary Driver IB-200 / GTS-100) accepts 100–277V AC at 50/60 Hz and supports five discrete dimming steps — 20, 40, 60, 80, and 100% — programmable through the UIS platform for automated grow cycle scheduling without manual intervention at the fixture level. In practical terms, the IONBOARD S24 delivers 1,726 PPF (µmol/s) at 2.65 µmol/J across a 2 x 4 ft. footprint, drawing 0.92A at 240V with a 50,000-hour LED life expectancy.

System Integration

To operate this platform at peak efficiency, verify your ecosystem matches these requirements:

• Controller Compatibility: UIS-compatible controllers required for automated scheduling, grow cycle programming, and multi-fixture centralized control via the AC Infinity app ecosystem.
• Mounting: Fixture dimensions are 11.81 x 23.62 in. (30.0 x 60.0 cm) with an LED board thickness of 0.43 in. (1.1 cm). Verify racking or hanging hardware is rated for 11.46 lbs. minimum with appropriate safety factor.
• Power: NEMA 1-15 Type-A plug with 5 ft. cord. Input voltage range 100–277V AC, 50/60 Hz. Confirm circuit capacity supports continuous load at 1.84A (120V) or 0.92A (240V) with NEC derating applied.
• HVAC Capacity: Account for fixture thermal load in sealed room HVAC sizing calculations. The unibody aluminum chassis dissipates heat conductively, but total room thermal load must be modeled at full fleet deployment.
• Scalability: Expansion capability via dongle supports multi-fixture UIS integration for facilities scaling beyond single-zone deployments.

Facility Integration Data

The following ROI reference and competitive comparison are provided to support procurement and capital planning decisions for multi-fixture deployments.

Operator Field Note

• Weight and Structural Load: The IONBOARD S24 weighs 11.46 lbs. Mounting hardware must be rated for this load with an appropriate safety factor. Verify racking, cable, or hanging system ratings before installation.
• Electrical Draw: 1.84A at 120V / 0.92A at 240V / 0.80A at 277V. Apply NEC continuous-load derating (125% of operating current) when sizing circuits for permanent installation. The 5 ft. power cord terminates in a NEMA 1-15 Type-A plug.
• Operating Environment: Rated for 32–140°F and 35–85% RH. Do not operate outside these parameters. IP-65 rating protects against dust ingress and water spray but does not qualify the fixture for submersion or direct wash-down applications.
• Dimming Protocol: Five discrete levels (20/40/60/80/100%) are accessible via UIS controller or app. There is no analog 0–10V dimming input. Confirm controller compatibility before integrating into existing control infrastructure.
• Driver Dimensions: The external driver measures 8.62 x 1.57 in. (21.9 x 4.0 cm). Account for driver placement and cable routing in fixture layout planning.
• Spectral Channels: The 730nm far-red channel influences photoperiodic response. Verify that far-red exposure aligns with your crop's intended light program, particularly in photoperiod-sensitive cultivars.

Shipping & Logistics

• Origin: Ships from Cannafull Spectrum Solutions' authorized distribution point within the contiguous 48 United States.
• Processing: Orders are processed within 1–2 business days of payment confirmation. Tracking information is provided upon shipment.
• Damage: Inspect all shipments upon receipt. Report freight damage within 48 hours of delivery to Cannafull Spectrum Solutions at (888) 378-0017 or sales@cannafullspec.com. Retain all original packaging for carrier claims.
• Returns: Returns accepted within 30 days of delivery. A Return Authorization (RA) number is required before returning any unit. Contact Cannafull Spectrum Solutions to initiate the RA process.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions? (888) 378-0017 or sales@cannafullspec.com

What's in the Box

• AC Infinity IONBOARD S24 LED Grow Light Board (220W)
• AC Infinity Proprietary Driver (IB-200 / GTS-100)
• Power cord with US Plug (NEMA 1-15 Type-A), 5 ft.

Note: Box contents are based on available manufacturer data. Verify complete contents upon receipt. Contact Cannafull Spectrum Solutions at (888) 378-0017 if any components are missing or damaged.

Regional Compliance & Deployment Notes

Commonly deployed in sealed commercial cultivation facilities across the United States. Installation, HVAC sizing, and electrical requirements vary by jurisdiction; always verify with local code.