AC Infinity 种植帐篷网格 | 柔性弹性绳 | 5x5'

Quick Spec: SKU: AC-ETB55  |  Non-Stretched: 44.1 x 44.1 in. (112 x 112 cm)  |  Stretched: 5 x 5 ft. (152.4 x 152.4 cm)  |  Cells: 196  |  Material: Elastic Polyester  |  UPC: 819137022805

Precision Control in Any Space

Every unmanaged canopy is a compounding liability. When lateral growth goes undirected, plants compete for light at the apex while lower sites remain underlit and underdeveloped — a structural inefficiency that compounds across every week of the production cycle. Rigid netting systems make the problem worse: fixed-grid geometry forces the operator to adapt plant training to the net rather than adapting the net to the plant. Stems abrade against hard cord surfaces. Repositioning mid-cycle means cutting and re-rigging. The result is inconsistent site development, uneven yield distribution, and labor hours spent correcting problems that a properly engineered support system would have prevented from the start.

After deployment, the canopy plane becomes a managed asset. Lateral growth is directed systematically across the full footprint, ensuring that every production site receives comparable light interception and airflow exposure. Heavy fruit and bud sites are supported without stem compression or abrasion, reducing mechanical stress losses at the point of maximum biomass accumulation. The operator gains the ability to adjust net height and hook position mid-cycle without cutting or re-rigging — a structural flexibility that eliminates the forced choice between canopy correction and production continuity.

The mechanism behind that operational outcome is an interweaving elastic polyester construction. Elastic rubber cords shrouded in high-quality polyester form 196 individual cells across the net's non-stretched footprint of 44.1 x 44.1 in. (112 x 112 cm), stretching to a full 5 x 5 ft. (152.4 x 152.4 cm) under load. The elastic construction allows each cell to conform to stem diameter and growth angle rather than imposing a fixed geometry — non-abrasive contact surfaces protect stem tissue while the cord material bears the mechanical load of heavy climbing fruits and dense bud sites. Four-corner steel hooks secure the net to grow tent steel frames and allow height adjustment without tools, enabling vertical repositioning as canopy height progresses through the production cycle. The net is also foldable for deployment in smaller frame configurations by relocating its corner hooks. In practical terms, the AC-ETB55 delivers 196-cell elastic support across a 5 x 5 ft. stretched footprint with a non-stretched storage profile of 44.1 x 44.1 in., mountable horizontally, vertically, or in an A-frame array via four steel hooks.

Where This Belongs (and Doesn't)

The AC-ETB55 is a passive mechanical support component. It does not interface with electrical systems, HVAC circuits, or environmental control networks. No licensed contractor is required for installation. Mounting is accomplished via the included steel hooks on compatible steel grow tent frames.

How It Works

The AC-ETB55 operates on an interweaving elastic cord architecture. Each cord in the grid is an elastic rubber core shrouded in a high-quality polyester sleeve — the rubber core provides the tensile elasticity that allows the net to stretch from its non-stretched state of 44.1 x 44.1 in. (112 x 112 cm) to its full operational footprint of 5 x 5 ft. (152.4 x 152.4 cm), while the polyester sheath provides the non-abrasive contact surface that protects stem tissue under sustained mechanical load. The interweaving construction distributes load across the full grid rather than concentrating stress at individual cord intersections, which is the failure mode of knotted or welded-junction netting under heavy fruit and bud weight.

The 196-cell array provides individual containment zones sized to accommodate most plant stem diameters while leaving sufficient clearance for pruning tools and manual picking operations without disturbing adjacent sites. Cell geometry is not fixed — because each cord is elastic, cell size adapts to the stem or branch occupying it, eliminating the pressure points that rigid-cell netting creates at stem contact surfaces. This adaptive cell geometry is the primary mechanism by which the AC-ETB55 reduces mechanical stress losses at high-biomass production sites.

Mounting is accomplished via four steel hooks positioned at the net's corners. The hooks are designed for compatibility with grow tent steel frame tubing and allow the operator to adjust net height along the vertical axis of the frame without tools — a critical capability for production cycles where canopy height progresses significantly between early and late stages. For smaller frame configurations, the net folds to a reduced footprint and the hooks relocate to the new corner positions, maintaining full structural function at reduced coverage area. In practical terms, the AC-ETB55 delivers 196-cell elastic polyester support across a 5 x 5 ft. stretched footprint, mountable at variable heights via four steel hooks, with a non-stretched storage and transport profile of 44.1 x 44.1 in. (112 x 112 cm).

System Integration

• Grow Tent Frame Compatibility: Designed for steel-frame grow tent structures; four-corner steel hooks attach directly to frame tubing without additional hardware
• Canopy Management Workflow: Integrates with low-stress training (LST) and screen-of-green (SCROG) methodologies; elastic cell geometry accommodates progressive stem thickening without requiring net replacement mid-cycle
• Environmental Control Compatibility: Non-metallic polyester construction does not interfere with humidity sensors, temperature probes, or airflow patterns when installed horizontally within the canopy plane
• Scalability: Multiple units can be deployed in vertical stacks or adjacent arrays within larger frame structures; hook repositioning allows configuration adjustment without additional tools or hardware
• Companion Equipment: Pairs with AC Infinity grow tent systems, environmental controllers, and clip fans for a fully integrated controlled-environment production ecosystem

Operator Field Notes

• Install sequence: Attach all four steel hooks to the frame before applying lateral tension — attempting to stretch the net to full footprint before all hooks are secured creates uneven cord stress and misaligned cell geometry
• Height adjustment protocol: Reposition hooks one corner at a time to maintain net tension symmetry during vertical adjustment; releasing all four hooks simultaneously allows the net to contract and may require full re-stretch to restore cell alignment
• Stem insertion: Insert stems through cells during early lateral growth stages before stem diameter increases — the elastic cell walls will accommodate progressive thickening, but forcing a mature stem through a cell risks cord abrasion at the sheath seam
• Folded configuration: When deploying in a smaller frame, fold the net so that the new corner positions align with available hook points before attaching — do not stretch the net diagonally to compensate for misaligned hooks, as asymmetric tension reduces cell uniformity across the canopy plane
• End-of-cycle handling: The elastic polyester construction allows the net to be removed, cleaned, and redeployed; avoid cutting cords during harvest — use the cell openings for pruning and picking access as designed to preserve net integrity for subsequent cycles
• Outdoor deployment: In A-frame or vertical outdoor configurations, anchor the base hooks to a fixed structure before tensioning the upper hooks to prevent net displacement under wind load

Operator FAQ

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, and international destinations are not fulfilled through this channel.
• Fulfillment: Orders are processed and shipped from authorized distribution points. Estimated transit times are provided at checkout based on destination zip code. Cannafull Spectrum Solutions does not guarantee carrier delivery windows.
• Returns: Defective units are eligible for return or replacement under applicable warranty terms. Non-defective returns must be initiated within the return window specified in the Cannafull Spectrum Solutions Return Policy. Product must be in original, uninstalled condition with all original packaging.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

For order support, contact Cannafull Spectrum Solutions at support@cannafullspec.com.

What's in the Box

• 1x AC Infinity Grow Tent Trellis Netting 5x5' — 196-cell elastic polyester interweaving construction (SKU: AC-ETB55)
• 4x Steel corner hooks (pre-attached to net corners; removable for hook repositioning in smaller frame configurations)

Box contents confirmed from manufacturer product data for SKU AC-ETB55. Cannafull Spectrum Solutions does not modify OEM packaging. If your shipment is missing any listed component, contact support@cannafullspec.com within 48 hours of delivery with your order number and a photograph of the received contents.

Regional Compliance & Deployment Notes

• Passive Mechanical Component: The AC-ETB55 is a passive mechanical support net. It contains no electrical components, no control circuitry, and no chemical treatments. No regulatory permits, electrical inspections, or licensed contractor involvement are required for installation.
• Material Compliance: Constructed from elastic polyester and steel hardware. Operators in jurisdictions with specific material restrictions for controlled-environment agricultural equipment should verify local compliance requirements independently.
• Facility Use: Suitable for deployment in licensed controlled-environment production facilities across the United States. Operators are responsible for ensuring that canopy management practices, including trellis netting deployment, comply with applicable state and local cultivation regulations.
• No Canadian Distribution: Cannafull Spectrum Solutions does not ship to Canadian provinces or territories. This product listing does not reference CSA certification or Health Canada compliance frameworks.
• Commercial Procurement: Operators procuring for multi-facility or multi-room deployments should confirm current MAP pricing and availability with Cannafull Spectrum Solutions prior to placing bulk orders.

Compliance requirements for controlled-environment cultivation facilities vary by state and municipality. The information provided in this section is for general reference only and does not constitute legal or regulatory advice. Cannafull Spectrum Solutions recommends that licensed operators consult with qualified compliance counsel regarding jurisdiction-specific requirements before deploying any cultivation equipment or methodology.