AC Infinity 控制器传感器探头 | 20' 有线气候探测器

Quick Spec: SKU: AC-SPB20  |  Cable Length: 20 ft. (609.60 cm)  |  Plug: 3.5 mm  |  Probe: Thermal-Alloy  |  Housing: SAE Grade Steel Type 316  |  IP Rating: IP-44  |  Warranty: 2-Year Product Warranty  |  MAP: $21.99 USD

Precision Control in Any Space

Every unmonitored zone in a cultivation or HVAC environment is a liability. When atmospheric data is absent — or worse, collected manually at irregular intervals — the gap between what the environment is doing and what the controller is responding to widens silently. Vapor pressure deficit drifts outside the target window. Temperature stratification goes undetected between canopy layers. Humidity spikes in dead-air pockets before any alarm triggers. The cost is not always visible in a single cycle; it accumulates across weeks of suboptimal conditions, inconsistent output, and reactive corrections that arrive too late to prevent the damage they are meant to address.

After deployment, the picture changes. The controller receives a continuous, real-time data stream from the exact location that matters — not from a sensor mounted at the intake or averaged across the room, but from the precise microclimate zone where conditions drive outcomes. Automated scheduling responds to actual atmospheric state rather than programmed assumptions. VPD stays within the target band. Temperature and humidity deviations are caught at the moment of onset, not discovered during the next manual walkthrough. The environment stops being a variable and becomes a managed parameter.

The mechanism behind that shift is the 69 Pro's thermal-alloy probe head, housed in SAE Grade Steel Type 316 construction and rated IP-44 for resistance to splashing water and dust — the two most common failure conditions in active cultivation and HVAC environments. The 3.5 mm plug interfaces directly with AC Infinity universal controllers, feeding temperature and humidity readings into the controller's automated logic without additional adapters or signal conversion. The 20-foot cable length — 609.60 cm — provides the reach to position the probe at the actual measurement point rather than at the nearest convenient location. IP-44 protection ensures the sensor maintains signal integrity in the humid, particulate-laden air that characterizes enclosed growing environments. In practical terms, the AC Infinity 69 Pro Climate Sensor delivers continuous VPD, temperature, and humidity data from a spot-detection probe positioned up to 20 feet from the controller, via a 3.5 mm direct-connect interface with a 2-Year Product Warranty.

Where This Belongs (and Doesn't)

The 69 Pro Climate Sensor is a passive data-acquisition device. It does not regulate voltage, interrupt circuits, or perform switching functions. Installation in live electrical panels or high-voltage HVAC control boards is outside the scope of this sensor's design and rating. Consult a licensed electrician or mechanical contractor for any integration requiring hardwired electrical access.

How It Works

The 69 Pro Climate Sensor operates as a direct input device within the AC Infinity controller ecosystem. The thermal-alloy probe head captures localized temperature and humidity data at the point of placement, converting environmental conditions into a signal transmitted through the 20-foot (609.60 cm) cable to the connected controller. The 3.5 mm plug connects to the sensor port on compatible AC Infinity universal controllers — including the CLOUDLINE Series of Inline Duct Fans and CLOUDWAY Series of Whole House Fans — enabling the controller's onboard logic to read atmospheric state in real time and execute automated responses based on programmed thresholds.

The probe's SAE Grade Steel Type 316 housing provides corrosion resistance appropriate for humid cultivation environments, while the IP-44 rating certifies protection against solid particle ingress and splashing water from any direction. This rating class is the minimum standard for sensors deployed in active grow environments where irrigation, transpiration, and condensation regularly introduce moisture into the air column. The thermal-alloy probe head is engineered to adapt to rapid climate fluctuations — a critical requirement in spaces where temperature and humidity can shift significantly within minutes of a lighting transition, irrigation event, or ventilation cycle change. The sensor's spot-detection coverage model means readings reflect actual conditions at the probe location rather than a spatially averaged estimate, giving the controller precise, location-specific data on which to base automated decisions. In practical terms, the AC Infinity 69 Pro Climate Sensor delivers real-time temperature and humidity readings from a thermal-alloy IP-44 probe over a 20-foot cable via a 3.5 mm direct-connect interface to AC Infinity universal controllers, backed by a 2-Year Product Warranty.

Commercial Assurance

System Integration

• Controller Compatibility: Connects directly to AC Infinity universal controllers via 3.5 mm plug — no adapters required
• Fan Series Integration: Validated for use with the CLOUDLINE Series of Inline Duct Fans and CLOUDWAY Series of Whole House Fans
• Automated Response: Feeds live temperature and humidity data into controller scheduling logic, enabling threshold-triggered fan speed adjustments and climate automation sequences
• Cable Reach: 20-foot (609.60 cm) cable allows probe placement at the actual measurement zone — canopy level, duct midpoint, or enclosure interior — independent of controller mounting location
• Ecosystem Position: Functions as the atmospheric sensing node within the AC Infinity UIS (Universal Intelligence System) architecture, providing the data layer on which automated deployment decisions are executed

Facility Integration Data

The following table models per-unit and fleet-level investment for operators deploying the 69 Pro Climate Sensor across multiple controlled zones. Each sensor represents one monitored atmospheric node within the AC Infinity controller ecosystem.

Operator Field Notes

• Probe Placement Discipline: Position the thermal-alloy probe head at the actual atmospheric zone of interest — canopy mid-height for cultivation environments, duct centerline for HVAC applications — not at the nearest accessible point. Spot-detection coverage means the reading is only as accurate as the placement is intentional.
• IP-44 Boundary Awareness: IP-44 certifies resistance to splashing water and dust ingress. It does not certify submersion or sustained water contact. Route the cable away from direct irrigation lines and condensation drip points to preserve sensor longevity.
• Cable Management in Active Environments: The 20-foot cable provides significant reach, but unsecured cable runs in active grow spaces introduce snag and abrasion risk. Use cable clips or hook-and-loop ties to route the cable along tent poles, duct runs, or frame members.
• Controller Pairing Verification: Before deployment, confirm the target controller is within the AC Infinity universal controller compatibility list. The 3.5 mm plug is a physical fit on many devices, but signal interpretation requires a compatible AC Infinity controller to function correctly.
• Rapid Fluctuation Response: The thermal-alloy probe is rated for adaptation to rapid climate fluctuations. In environments with aggressive lighting transitions or high-frequency irrigation cycles, allow one full environmental cycle after initial installation before using sensor data to calibrate automated thresholds.
• Redundancy Deployment: In multi-zone facilities, deploy one sensor per distinct atmospheric compartment. A single sensor reading averaged across zones will mask localized deviations that drive inconsistent output between rooms or tent sections.

Operator FAQ

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, and international addresses are not fulfilled through this listing.
• Fulfillment: Orders are processed and shipped from authorized distribution. Tracking information is provided at time of shipment. Estimated transit times vary by destination within the contiguous United States.
• Returns: Free and easy returns accepted within 30 days of delivery for items in original, uninstalled condition. Contact Cannafull Spectrum Solutions to initiate a return authorization before shipping any unit back.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about shipping, lead times, or volume orders? Contact Cannafull Spectrum Solutions directly at cannafullspec.com.

What's in the Box

• 1x AC Infinity 69 Pro Climate Sensor — 20 ft. corded probe (SKU: AC-SPB20)
• 3.5 mm plug pre-installed for direct controller connection

Note: Box contents are confirmed based on available manufacturer source data. Accessory items such as mounting hardware, documentation inserts, or additional cables are not specified in source data and may or may not be included. Verify complete box contents upon receipt. If any component is missing or damaged, contact Cannafull Spectrum Solutions before installation.

Regional Compliance & Deployment Notes

• Electrical Classification: The 69 Pro Climate Sensor is a low-voltage passive sensing device. It does not perform switching, load control, or voltage regulation functions. No electrician sign-off is required for sensor placement in most U.S. jurisdictions, but verify local codes for any installation involving HVAC ductwork penetration or enclosed electrical spaces.
• IP Rating Compliance: IP-44 certification is an internationally recognized ingress protection standard. This rating is appropriate for the humidity and particulate conditions present in enclosed cultivation environments operating under standard U.S. commercial facility parameters.
• Licensed Facility Deployment: This sensor is deployed in licensed commercial cultivation facilities across the United States. Operators in regulated cannabis markets should confirm that atmospheric monitoring equipment meets any state-specific environmental control documentation requirements applicable to their license class.
• Controller Ecosystem Requirement: Full functionality requires a compatible AC Infinity universal controller. Operators procuring sensors for facility-wide deployment should confirm controller inventory and port availability before scaling sensor deployment across multiple zones.
• No Canadian Distribution: Cannafull Spectrum Solutions does not ship to Canadian provinces or fulfill orders subject to Health Canada or CSA regulatory frameworks. This product listing applies exclusively to licensed U.S. facilities and U.S.-based operators.

Compliance information provided here is for general reference only and does not constitute legal or regulatory advice. Operators are responsible for verifying that all equipment deployments meet the requirements of their applicable state, county, and municipal regulations. Cannafull Spectrum Solutions makes no warranty regarding the regulatory status of this product in any specific jurisdiction.