AC Infinity CONTROLLER 63 | 无线远程风扇控制器
AC Infinity CONTROLLER 63 | 无线远程风扇控制器 已缺货，一旦有货将立即发货。
Unlock Trade Pricing
Join our commercial tier for bulk pricing and inventory alerts.
AC Infinity CONTROLLER 63 | 无线远程风扇控制器
AC Infinity CONTROLLER 63 | 无线远程风扇控制器 已缺货，一旦有货将立即发货。
描述
描述
The AC Infinity Controller 63 (CTR63A) is a wireless remote fan controller engineered for craft operators who need precise, repeatable airflow management across HVAC and controlled-environment applications without running control wiring to each unit.
- Outcome: 10-speed PWM fan control delivered wirelessly from up to 130 ft., with onboard memory that retains speed settings through power cycles
- Replaces: Manual inline speed dials, hardwired wall controllers, and walk-up fan adjustments that interrupt workflow
- Environment: Sealed grow rooms, mechanical chases, rooftop HVAC installations, and any space where direct access to the fan is operationally impractical
FACTORY-AUTHORIZED DEALER — CANNAFULL SPECTRUM SOLUTIONS
Deployed in licensed commercial facilities across the United States.
Quick Spec: SKU CTR63A | 433 MHz wireless | 130 ft. (40 m) range | 10-speed PWM | Compatible: CLOUDLINE, AIRLIFT, CLOUDWAY, CLOUDLIFT EC motor series | Includes 4-Pin Molex to UIS adapter (4.07 in.) | Powered by two AAA batteries
Precision Control in Any Space
Every facility has at least one fan that is difficult to reach — mounted above a sealed canopy, tucked into a mechanical chase, or installed at ceiling height where manual adjustment means stopping work, repositioning equipment, and breaking the environmental rhythm you spent hours dialing in. The real cost is not the thirty seconds it takes to walk over. The cost is the compounding variance that accumulates every time an adjustment gets deferred because access is inconvenient. Airflow that runs too fast wastes energy and desiccates canopy edges. Airflow that runs too slow allows heat stratification and vapor pressure deficit to drift outside target range. Neither failure announces itself loudly — both erode output quietly, cycle after cycle, until the variance shows up in the harvest data and the cause is no longer traceable.
After deploying the Controller 63, the operational picture changes in a specific and measurable way. Fan speed becomes a parameter you adjust from your current position — at the environmental monitor station, at the entry point, or anywhere within the space — without interrupting the task in front of you. Speed changes happen in real time, the system confirms the new setting via white LED indicators, and the onboard memory chip locks that setting in so a power interruption does not reset your configuration. The result is an airflow profile that stays where you set it, responds immediately when conditions shift, and requires no physical contact with the fan unit to manage.
The mechanism behind that operational reliability is a 433 MHz wireless signal architecture with a verified range of 130 ft. (40 m) — sufficient to cover the full diagonal of most single-room commercial installations without signal degradation. The remote controller operates on 2 to 3.6V drawing 0.1 mA at 0.3 mW, powered by two AAA batteries. The receiver operates on 8 to 15V drawing 10 mA at 100 mW and connects to compatible AC Infinity EC motor fans — CLOUDLINE, AIRLIFT, CLOUDWAY, and CLOUDLIFT series — via the included 4-Pin Molex to UIS adapter (4.07 in. / 10.3 cm). PWM speed control delivers 10 discrete speed steps, each confirmed by white LED indicators on the remote face. The controller body measures 3.59 x 1.37 x 0.75 in. (9.1 x 3.5 x 1.9 cm); the receiver measures 1.14 x 1.57 x 0.59 in. (2.9 x 4.0 x 1.5 cm) with a 0.25 in. (6.5 mm) mounting hole for fixed installation. The system operates within a humidity range of 35 to 85% RH, covering standard controlled-environment conditions. In practical terms, the Controller 63 delivers 10-speed wireless PWM fan control across a 130 ft. operating radius at a receiver power draw of 100 mW, with speed settings retained through power cycles via onboard backup memory.
Where This Belongs (and Doesn't)
The Controller 63 is a low-voltage PWM signal device. It does not replace line-voltage switching, variable frequency drives, or any high-current motor control application. Installation must comply with all applicable electrical codes. Consult a licensed electrician for any integration involving line-voltage wiring or commercial HVAC control panels.
Qualified Deployment Environments
- Sealed cultivation rooms where fan units are mounted above the canopy or in overhead mechanical positions
- HVAC inline duct runs where physical access to the speed controller requires ladder or elevated platform
- Multi-zone facilities where a single operator manages airflow across several rooms from a central corridor
- Rooms operating at 35 to 85% RH — the full operating humidity range of the receiver
- Any installation using AC Infinity CLOUDLINE, AIRLIFT, CLOUDWAY, or CLOUDLIFT EC motor fans with UIS or Molex connectors
Outside Scope
- Non-AC Infinity fan brands or AC Infinity fans without EC motors or UIS/Molex connector compatibility
- Applications requiring simultaneous wired and wireless control of the same fan — only one receiver or wired controller may be active per fan at a time
- Line-voltage motor control or any application exceeding the receiver's 8 to 15V / 10 mA operating parameters
- Environments with humidity consistently below 35% RH or above 85% RH
- Installations requiring signal penetration through reinforced concrete or dense RF-shielded enclosures beyond 130 ft.
How It Works
The Controller 63 operates as a two-component wireless system: a handheld remote transmitter and a compact receiver module that installs inline between the fan's power connector and its control input. Pairing is mechanical and deterministic — slide the three pins on both the remote and the receiver to matching numbered positions, and the 433 MHz link is established. There is no software pairing sequence, no Bluetooth handshake, and no app dependency. Once paired, the remote transmits PWM speed commands across the 433 MHz band at a verified range of 130 ft. (40 m), sufficient to span the full length of most single-room commercial installations.
Speed selection is a 10-step discrete system. Each step is confirmed by white LED indicators on the remote face, giving the operator a visual readout of the current speed setting without requiring line-of-sight to the fan itself. The onboard memory chip in the receiver retains the last active speed setting through power interruptions — when power is restored, the fan resumes at the previously programmed speed without requiring operator input. This eliminates the reset-and-reprogram cycle that occurs with non-memory controllers after a power event.
The included 4-Pin Molex to UIS adapter (4.07 in. / 10.3 cm) bridges the receiver to AC Infinity fans built with either connector standard, covering the CLOUDLINE, AIRLIFT, CLOUDWAY, and CLOUDLIFT EC motor series without requiring additional hardware. The receiver body (1.14 x 1.57 x 0.59 in. / 2.9 x 4.0 x 1.5 cm) includes a 0.25 in. (6.5 mm) mounting hole for fixed installation in a duct collar, junction box, or equipment panel. The remote controller (3.59 x 1.37 x 0.75 in. / 9.1 x 3.5 x 1.9 cm) is powered by two AAA batteries. The receiver draws 10 mA at 100 mW on 8 to 15V. Both components are rated for 35 to 85% RH operating humidity. Expanding coverage to multiple fans requires additional receivers purchased separately — each receiver pairs to the same remote, enabling simultaneous speed commands across a multi-fan array from a single handheld unit. In practical terms, the Controller 63 delivers 10-speed wireless PWM control across a 130 ft. radius, with a 100 mW receiver draw and persistent speed memory that survives power interruptions without operator intervention.
Commercial Assurance
- Authorized Distribution: Cannafull Spectrum Solutions is a factory-authorized dealer for AC Infinity products. Every unit ships as a genuine, manufacturer-sourced component — no gray-market inventory, no repackaged returns.
- Warranty Status: Warranty terms for the Controller 63 (CTR63A) are not specified in available manufacturer source data. Contact Cannafull Spectrum Solutions or AC Infinity directly at the time of purchase to confirm current warranty coverage before deployment.
- Compatibility Verification: The Controller 63 is confirmed compatible with AC Infinity EC motor fans in the CLOUDLINE, AIRLIFT, CLOUDWAY, and CLOUDLIFT series using UIS or Molex connectors. Verify your fan's connector type before ordering.
- Operational Constraint Disclosure: Only one receiver or wired controller may be used with each fan at a time. A wired controller and the Controller 63 receiver cannot operate the same fan simultaneously. Plan your control architecture accordingly before purchasing additional receivers.
- Support Access: Pre-sale technical questions and post-sale integration support are available through cannafullspec.com. Our team can assist with multi-receiver deployment planning and compatibility confirmation for your specific fan inventory.
System Integration
- EC Motor Fan Ecosystem: Integrates directly with AC Infinity CLOUDLINE, AIRLIFT, CLOUDWAY, and CLOUDLIFT series fans via the included 4-Pin Molex to UIS adapter — no additional hardware required for single-fan deployment.
- Multi-Fan Expansion: Additional receivers (sold separately) pair to the same Controller 63 remote, enabling simultaneous speed commands across a multi-fan array from a single handheld unit. Each receiver controls one fan; the remote can address all paired receivers concurrently.
- UIS Ecosystem Compatibility: The included Molex-to-UIS adapter ensures the Controller 63 operates within the AC Infinity UIS (Universal Interface System) connector architecture, maintaining signal integrity across the control chain.
- Power Independence: The remote operates on two AAA batteries with no hardwired power requirement, allowing placement anywhere within the 130 ft. operating radius without proximity to an outlet or control panel.
- Control Architecture Constraint: The Controller 63 receiver and any wired speed controller are mutually exclusive on a single fan. Map your control topology before deploying mixed wired/wireless configurations across a multi-zone facility.
Facility Integration Data
The following table models Controller 63 deployment cost across standard craft-operator fleet sizes, using the $189.00 unit price for the primary controller and accounting for additional receivers (sold separately) required for multi-fan configurations.
| Fleet Configuration | Controller 63 Units | Total Controller Cost | Operational Notes |
|---|---|---|---|
| Single-Zone (1 remote, 1 fan) | 1 | $189.00 | Includes receiver and Molex-to-UIS adapter. Immediate wireless control up to 130 ft. |
| Dual-Zone (1 remote, 2 fans) | 1 remote + 1 additional receiver | $189.00 + receiver cost | One remote addresses both receivers simultaneously. Additional receiver sold separately. |
| Multi-Zone (1 remote, 5+ fans) | 1 remote + 4+ additional receivers | $189.00 + (receiver cost x 4+) | Single operator manages full fan array from one handheld unit. Verify 433 MHz signal coverage across full facility footprint before final receiver placement. |
Additional receiver pricing not included in source data. Contact Cannafull Spectrum Solutions for current receiver pricing and multi-unit bundle availability.
Operator Field Notes
- Verify connector type before installation: The included adapter covers 4-Pin Molex and UIS connectors. Confirm your specific fan model uses one of these connector standards — CLOUDLINE, AIRLIFT, CLOUDWAY, and CLOUDLIFT EC motor series are confirmed compatible.
- One receiver per fan, one active controller per fan: If your fan currently has a wired speed controller installed, that controller must be disconnected before the Controller 63 receiver is active. Both cannot operate the same fan simultaneously.
- Mounting hole enables fixed receiver placement: The 0.25 in. (6.5 mm) mounting hole on the receiver (1.14 x 1.57 x 0.59 in.) allows permanent installation in a duct collar or equipment panel rather than leaving the receiver suspended by its cable — recommended for any installation subject to vibration.
- Signal range is line-of-sight rated at 130 ft. (40 m): Dense building materials, metal ductwork, and RF-reflective surfaces can reduce effective range. Conduct a range test with the receiver in its final installed position before completing the installation.
- Battery replacement does not erase speed memory: The onboard memory chip in the receiver retains speed settings independently of the remote's battery state. Replacing AAA batteries in the remote does not require reprogramming the speed setting.
- Multi-receiver pairing uses pin-matching, not software: Pairing additional receivers to the same remote is accomplished by sliding the three pins on both units to matching numbered positions. No app, no Bluetooth, no network dependency.
Operator FAQ
Q: Can the Controller 63 remote operate multiple fans at the same time?
A: Yes. The Controller 63 remote can address multiple fans simultaneously when each fan has its own paired receiver installed. Additional receivers are sold separately. All receivers paired to the same remote will respond to speed commands at the same time, making it possible for a single operator to adjust airflow across an entire fan array from one handheld unit. Each receiver controls exactly one fan; the remote can address all paired receivers concurrently.
Q: Which AC Infinity fan models are compatible with the Controller 63?
A: The Controller 63 is confirmed compatible with AC Infinity EC motor fans in the CLOUDLINE, AIRLIFT, CLOUDWAY, and CLOUDLIFT series. Compatibility requires that the fan uses either a UIS or 4-Pin Molex connector — the included adapter (4.07 in. / 10.3 cm) covers both standards. If you are unsure whether your specific fan model uses one of these connectors, verify with AC Infinity or Cannafull Spectrum Solutions before ordering.
Q: Can I use the Controller 63 and a wired speed controller on the same fan at the same time?
A: No. Only one receiver or wired controller may be used with each fan at a time. The Controller 63 receiver and a wired speed controller cannot operate the same fan simultaneously. If your fan currently has a wired controller installed, that controller must be disconnected before the Controller 63 receiver is placed in the control circuit. Plan your control architecture before deploying mixed wired and wireless configurations across a multi-zone facility.
Q: What happens to the fan speed setting when power is interrupted?
A: The Controller 63 receiver includes an onboard memory chip that retains the last active speed setting through power interruptions. When power is restored, the fan resumes operation at the previously programmed speed without requiring any input from the operator. This eliminates the manual reset cycle that occurs with non-memory controllers after a power event — a meaningful operational advantage in facilities where power interruptions are possible during off-hours.
Q: What is the effective wireless range of the Controller 63, and what can reduce it?
A: The Controller 63 operates on a 433 MHz signal with a rated range of 130 ft. (40 m). This rating reflects line-of-sight conditions. In practice, dense building materials, metal ductwork, reinforced concrete walls, and RF-reflective surfaces can reduce effective range. Conduct a range test with the receiver in its final installed position before completing the installation. If signal reliability is marginal at the required distance, reposition the receiver to a location with a clearer signal path to the remote's operating position.
Q: Does the Controller 63 require an app, Wi-Fi, or network connection to operate?
A: No. The Controller 63 operates entirely on a 433 MHz RF signal with no app, Wi-Fi, Bluetooth, or network dependency of any kind. The remote transmits directly to the receiver. Pairing is accomplished by sliding the three pins on both units to matching numbered positions — a mechanical process that requires no software, no account creation, and no internet connectivity. This makes the system fully functional in RF-isolated environments and facilities with restricted network access policies.
Shipping & Logistics
- Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this territory cannot be fulfilled.
- Fulfillment: Orders are processed and shipped from authorized distribution. Tracking information is provided at the time of shipment. Contact cannafullspec.com for current lead times on the Controller 63 (CTR63A).
- Returns: Returns are accepted for defective units per the Cannafull Spectrum Solutions return policy. Non-defective returns are subject to the restocking fee disclosed below. Review full terms before ordering.
- Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.
For order support, pre-sale technical questions, or multi-unit procurement inquiries, contact Cannafull Spectrum Solutions at cannafullspec.com.
What's in the Box
- Controller 63 wireless remote transmitter (3.59 x 1.37 x 0.75 in. / 9.1 x 3.5 x 1.9 cm) — powered by two AAA batteries (batteries not confirmed as included; verify at time of receipt)
- Receiver module (1.14 x 1.57 x 0.59 in. / 2.9 x 4.0 x 1.5 cm) with 0.25 in. (6.5 mm) mounting hole
- 4-Pin Molex to UIS adapter, 4.07 in. (10.3 cm)
Box contents confirmed from manufacturer source data. Additional accessories such as mounting hardware or documentation are not specified in available source data. Inspect shipment upon receipt and report any discrepancies to Cannafull Spectrum Solutions immediately. Additional receivers for multi-fan deployment are sold separately and are not included in this kit.
Regional Compliance & Deployment Notes
- FCC / RF Compliance: The Controller 63 operates on the 433 MHz ISM band. Verify that 433 MHz RF device use is permitted in your facility's jurisdiction and that no local RF interference restrictions apply to your installation environment.
- Electrical Code Compliance: The Controller 63 is a low-voltage PWM signal device. All installation work involving line-voltage wiring, HVAC control panels, or commercial electrical systems must comply with applicable local, state, and national electrical codes. Engage a licensed electrician for any work outside the low-voltage control circuit.
- Controlled-Environment Facility Use: The Controller 63 is designed for HVAC and controlled-environment applications. Operators in licensed cultivation facilities should verify that all environmental control equipment, including fan controllers, meets the equipment standards required by their state licensing authority.
- Distribution Territory: Cannafull Spectrum Solutions fulfills orders within the contiguous 48 United States only. This product is not available for shipment to addresses outside this territory through Cannafull Spectrum Solutions.
- Manufacturer Compliance Documentation: For FCC ID, regulatory certifications, or compliance documentation specific to the Controller 63 (CTR63A), contact AC Infinity Inc. directly or request documentation through Cannafull Spectrum Solutions at cannafullspec.com.
Product specifications, compatibility data, and pricing are sourced from AC Infinity manufacturer data current at time of publication. Cannafull Spectrum Solutions makes no independent warranty claims beyond those established by the manufacturer. Verify current warranty terms, compatibility, and regulatory status with AC Infinity or Cannafull Spectrum Solutions before finalizing procurement decisions. Specifications subject to change without notice.
Route Package Protection
Route Package Protection
在 CannaFull Spectrum Solutions，我们明白在运输过程中安心是至关重要的。这就是为什么我们自豪地为您的所有在线订单提供全面的运输保护和跟踪解决方案 Route！
Route：您的一体化运输中心
Route 与您的 CannaFull Spectrum Solutions 购物体验无缝集成，让您完全掌控配送过程，安心无忧。以下是 Route 提供的功能：
- 自动包裹保护：在 CannaFull Spectrum Solutions 上下的每个订单都会自动附带 Route 的基本保护计划，保护您的购买免遭包裹丢失、被盗或损坏。
- 增强型跟踪： Route 超越了基本跟踪信息。获取实时更新、预计交付时间以及有关潜在延误或问题的主动警报。
- 轻松的索赔管理：如果您的包裹遇到问题，Route 可简化索赔流程。直接通过 Route 应用提出索赔，即可快速高效地获得解决方案。
- 价格匹配保证： Route 可确保您获得最优惠的价格。如果您在一定时间内（通常为 48 小时）发现同一商品的广告价格更低，Route 将退还差价。
- 丢失邮件更换： Route 提供额外的安全保障。如果您的包裹被标记为已送达但您从未收到，Route 可能会更换它，具体取决于具体物品和承保选项。
使用大麻全光谱解决方案路线的好处：
- 放心购物：知道您购买的商品不会丢失、被盗或损坏，您就可以完全放心购物。
- 轻松跟踪：利用 Route 的实时跟踪和主动通知随时了解每一步情况。
- 轻松索赔： Route 简化了索赔流程，在您遇到任何与交付相关的问题时，可为您节省时间并避免烦恼。
- 每次购买都增加价值： Route 会自动为您的 [您的商店名称] 订单提供基本保护和有价值的跟踪功能，无需支付额外费用。
如何开始路线：
使用 Route 购买 CannaFull Spectrum Solutions 简单又方便：
- 完成您的订单：当您在 CannaFull Spectrum Solutions 结账时，您将看到激活 Route 对您的订单的保护的选项（通常是预先选择的）。
- 下载路线应用程序：为了获得更加无缝的体验，请下载适用于 iOS 和 Android 的免费路线应用程序。
- 追踪您的包裹：登录路线应用程序或查看您的电子邮件以获取追踪更新并管理您的受保护货件。
Route：您的无忧运输合作伙伴
CannaFull Spectrum Solutions 致力于通过每次购买提供 Route 服务，为您提供无压力的购物体验。Route 让您可以放心购物，因为您知道您的包裹受到保护，并且每一步都可以轻松跟踪。
常见问题：
- Route 是免费的吗？ CannaFull Spectrum Solutions 的每笔订单都会自动包含基本 Route 保护。Route 还提供具有附加功能和覆盖范围的可选高级计划。
- 如何向 Route 提出索赔？可通过 Route 应用程序或网站轻松提出索赔。
- 如果我的包裹丢失了怎么办？根据具体情况和您选择的保险计划，Route 可能会赔偿您或更换丢失的物品。
放心购物，轻松追踪！选择 CannaFull Spectrum Solutions，在下次在线购物时体验 Route 的强大功能。
Shiping, Cancelations & Returns
Shiping, Cancelations & Returns
- 标准运费（预计 3-5 个工作日内送达）：X 美元（Y 美元以上订单免费）
- 加急运输（预计 1-2 个工作日内送达）：$Z
国际运输（如适用）：我们目前提供/不提供国际运输。（如果您提供，请注明费率和预计交货时间）。
追踪和路线保护：订单发货后，您将通过电子邮件收到带有追踪号的通知。我们还与 Route 合作，在结账时为所有订单提供额外的运输保护（包裹丢失、被盗或损坏），只需支付少量费用。
请注意：由于代发货的特性，送货时间可能比其他商店宣传的稍长。我们努力提供尽可能准确的估算，但可能会出现不可预见的情况。
取消政策
我们理解计划可能会发生变化，因此您可以在下单后 24 小时内取消订单并获得全额退款。如果您的订单已转发给我们的履行合作伙伴，我们将尽力满足您的取消请求，但可能会收取全额取消费或商店信用额。
退货政策
我们希望您对所购商品完全满意。如果您出于任何原因不满意，您可以在购买之日起 30 天内退回符合条件的商品。
符合条件的商品：大多数全新、未使用、未开封且带原包装的商品均符合退货条件。例外情况可能包括（如适用，请列出任何例外情况，例如最终销售商品或易腐烂商品）。
退货条件：要获得全额退款，退回的商品必须是未使用状态，且所有原始标签和包装完好无损。
退货运费：如果退货是由于我们的错误（例如，寄送了错误的商品）造成的，我们将承担退货运费。否则，您将承担退货运费。但是，您可以使用 Route 的保护计划（如果购买）来补偿丢失、被盗或损坏包裹的退货运费。
退款流程：收到您退回的商品并核实其状况后，我们将在 X 个工作日内处理您的退款。退款将以您原来的付款方式或商店信用额度发放，具体取决于您的偏好。
通过在我们这里购物，您同意本运输、取消和退货政策中概述的条款。
Warranty
Warranty
在 CannaFull Spectrum Solutions，我们希望您对购买的产品充满信心。我们提供的许多 LED 生长灯都附带制造商保修，确保您的投资得到保护。
了解您的保修：
- 具体保修条款和条件将根据您购买的个别产品而有所不同。
- 我们强烈建议您在收到产品时查看随附的制造商保修信息。
- 该信息通常详细说明保修期、保险范围和索赔流程。
帮助中心：
虽然保修由制造商直接处理，但我们理解处理保修索赔有时会令人困惑。在 CannaFull Spectrum Solutions，我们在整个过程中为您提供支持：
- 轻松访问保修信息：我们努力在每个产品页面上提供清晰简明的保修信息。这通常包括可下载的保修文件或制造商保修网站的链接。
- 专属客户支持：如果您对产品保修有任何疑问或需要帮助提出索赔，请随时联系我们友好的客户支持团队。我们将很乐意指导您完成整个流程，并帮助您从制造商处获得应有的支持。
我们能做什么：
虽然我们不能直接处理保修索赔，但我们可以通过以下几种方式为您提供帮助：
- 帮助找到您的特定产品的相关保修信息。
- 提供制造商保修部门的联系方式。
- 提供有关完成和提交保修索赔的指导。
- 充当您和制造商之间的联络人，让您随时了解整个过程。
我们对您的承诺：
CannaFull Spectrum Solutions 致力于提供积极的客户体验。我们希望您对购买的产品感到满意，这包括确保您的保修索赔得到迅速有效的处理。
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Buy now pay later with
