AC Infinity CLOUDRAY S6 2-Pack 6in Clip Fan | 325 CFM, 10 Speeds

Precision Control in Any Space

The enemy is guesswork — and in a sealed cultivation environment, guesswork compounds silently. A fan locked at one speed creates stagnant zones the moment canopy density shifts. A unit with no oscillation control either hammers a single node or misses entire rows entirely. When the only adjustment available is physically repositioning the hardware, every environmental correction costs labor time, introduces handling risk, and still delivers no guarantee of uniformity. The result is a circulation profile that drifts out of calibration with every growth stage, and an operator who is managing equipment instead of managing outcomes.

After deployment, the picture changes. Both units in the 2-pack are positioned once and left to execute. Speed ramps up or down automatically in response to UIS controller triggers tied to temperature and humidity thresholds. Dynamic wind modes cycle through variable airflow patterns that replicate natural outdoor conditions, eliminating the static pressure differentials that cause uneven transpiration and localized moisture accumulation. Oscillation sweeps are dialed to the exact angular range that covers the canopy without contacting tent walls. The operator sets the parameters; the ecosystem maintains them continuously, around the clock, without manual intervention.

The mechanism behind that outcome is a redesigned brushless EC motor — larger in physical footprint than standard clip fan motors — built around carbon steel gears and dual ball bearings rated for omnidirectional mounting. The 6.5" impeller moves 325 CFM at a measured 31 dBA noise floor, operating against 25 Pa of static pressure across a 100–240V AC input range. Ten discrete speed levels, ten dynamic wind modes, and ten oscillation settings with an angular sweep range of 10° to 90° (head tilt: 30° up, 40° down) give the operator a control matrix of 1,000 addressable airflow states per unit. The IP54 ingress protection rating keeps moisture and particulate out of the motor housing across operating conditions spanning 35–85% RH and 32–140°F. At 12W draw and 0.14A current, two units running continuously represent a negligible electrical load. In practical terms, the CLOUDRAY S6 2-Pack delivers 325 CFM per unit at 31 dBA across a fully programmable 10-speed, 10-mode, 10-oscillation control matrix, drawing 12W at 0.14A per unit on any 100–240V AC circuit.

Where This Belongs (and Doesn't)

Electrical installation must comply with all applicable local codes. Consult a licensed electrician for circuit load calculations in multi-unit deployments. This product is not rated for outdoor or unenclosed wet-location use beyond its IP54 ingress protection specification.

How It Works

The CLOUDRAY S6's performance architecture begins at the motor. The Advanced 35MM brushless EC motor is physically larger than the motors found in standard clip fan designs — a deliberate engineering decision that increases thermal mass, reduces rotational stress on internal components, and extends oscillation mechanism lifespan. Carbon steel gears transmit torque from the motor to the oscillation drive train without the flex or wear degradation associated with polymer gear sets. Dual ball bearings support the impeller shaft in both horizontal and vertical mounting orientations, maintaining rotational precision regardless of how the unit is positioned on the clip mount.

The 6.5" impeller generates 325 CFM of maximum airflow against 25 Pa of static pressure — the resistance figure that determines whether a fan maintains output when air paths are partially obstructed by canopy density or structural elements. At 31 dBA, the acoustic output is low enough to operate continuously in environments where noise management is a factor. The 96-inch (8-foot) cord provides positioning flexibility across standard tent configurations without requiring extension hardware.

The control architecture operates across three independent axes. Speed is adjustable across 10 discrete levels. Dynamic wind mode selection across 10 programmed patterns introduces variable velocity cycling that prevents the static pressure differentials associated with constant-speed operation. Oscillation is independently configurable across 10 levels within a 10°–90° angular range, with head tilt adjustable 30° upward and 40° downward from neutral. These three axes are accessible via onboard LED-indicated controls and, when paired with a UIS controller, via WiFi app, climate triggers, scheduling timers, and cycle automation. The IP54 rating seals the motor housing against moisture ingress and particulate contamination across the full 35–85% RH and 32–140°F operating envelope. In practical terms, the CLOUDRAY S6 2-Pack delivers a three-axis control matrix — 10 speeds, 10 wind modes, 10 oscillation levels — from a 12W, 0.14A motor platform rated to 67,000 hours of continuous operation.

Commercial Assurance

System Integration

• UIS Controller Ecosystem: Both units in the 2-pack are UIS-compatible, enabling WiFi app control, temperature and humidity climate triggers, scheduling timers, and cycle automation through a single controller interface
• Atmospheric Control Layering: The 10-speed, 10-mode, 10-oscillation control matrix integrates with UIS environmental data to automate airflow response to real-time canopy conditions without operator intervention
• Universal Voltage Compatibility: 100–240V AC input allows deployment alongside any standard facility electrical infrastructure without transformer or step-down hardware
• Omnidirectional Mounting: Dual ball bearings support horizontal and vertical clip mounting, enabling positioning on tent poles, frame rails, or structural supports at any angle without performance degradation
• Scalable Deployment: Two-unit pack format allows simultaneous dual-zone coverage from a single purchase, with additional units expandable within the same UIS controller network

Facility Integration Data

Operator Field Notes

• Oscillation Angle Precision: The 10-level oscillation system allows the operator to set minimum sweep at 10° for targeted single-node airflow or expand to 90° for full-width canopy coverage — critical for avoiding tent wall contact in compact enclosures
• Dynamic Wind Mode Selection: The 10 programmed wind modes introduce variable velocity cycling that prevents the static pressure buildup associated with constant-speed fans; select modes that match the transpiration demand of the current growth stage
• Mounting Orientation: Dual ball bearings support both horizontal and vertical clip mounting without bearing wear penalty — position units on vertical poles for lateral sweep or horizontal rails for downward canopy penetration
• UIS Integration Sequence: Pair both units to the UIS controller before finalizing physical placement; confirm climate trigger thresholds and scheduling parameters are active before closing the tent for an unattended run cycle
• Cord Management: The 96-inch (8-foot) cord provides sufficient reach for most standard tent configurations; route cord along frame rails to prevent contact with canopy and reduce tripping hazard during access
• Continuous Operation Rating: The Advanced 35MM step motor technology supports 24-hour continuous operation; the 67,000-hour life expectancy rating assumes sustained duty cycle — do not cycle power unnecessarily as thermal cycling is a primary wear mechanism in brushless motor systems

Operator FAQ

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, and international destinations cannot be fulfilled through this listing.
• Fulfillment Timeline: In-stock orders typically ship within 1–3 business days. Tracking information will be provided via the email address on file at time of order. Delivery timelines vary by carrier and destination.
• Returns: Returns are accepted subject to the conditions outlined in the Cannafull Spectrum Solutions Return Policy. Items must be in original, uninstalled condition with all original packaging. Defective units are handled separately under manufacturer warranty procedures.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about your order: Contact Cannafull Spectrum Solutions directly via the contact page at cannafullspec.com before initiating a return or warranty claim.

What's in the Box

• 2x CLOUDRAY S6 6" Clip Fan units (SKU: AC-CCX6)
• 2x Clip mounting assemblies (one per unit)
• 2x Power cords, 96 inches (8 feet) each
• Manufacturer documentation and warranty information

Note: Box contents are based on manufacturer specifications for SKU AC-CCX6. UIS controllers, mounting accessories beyond the included clip, and supplemental automation hardware are sold separately. Verify box contents against the manufacturer's packing list upon receipt. Contact Cannafull Spectrum Solutions immediately if any component is missing or damaged prior to installation.

Regional Compliance & Deployment Notes

• ETL Certification: The CLOUDRAY S6 2-Pack carries ETL Listed certification, Certificate #5027708, verifying compliance with applicable U.S. electrical safety standards. ETL listing is recognized by authorities having jurisdiction (AHJ) across licensed U.S. facilities.
• Electrical Code Compliance: Installation must comply with the National Electrical Code (NEC) and all applicable state and local electrical codes. Multi-unit deployments should be reviewed by a licensed electrician for circuit load and branch circuit compliance prior to energizing.
• Licensed Facility Use: Operators deploying this equipment in state-licensed cultivation facilities are responsible for ensuring that all environmental control equipment meets the compliance requirements of their applicable state regulatory program. ETL listing supports but does not guarantee regulatory approval in all jurisdictions.
• Shipping Jurisdiction: This product is available for shipment within the contiguous 48 United States only through Cannafull Spectrum Solutions. Cannafull Spectrum Solutions does not ship to Canadian provinces or international destinations.
• Voltage Compliance: The 100–240V AC operating range is compatible with standard U.S. residential and commercial electrical infrastructure. Confirm outlet configuration and circuit capacity before installation in any facility environment.

Compliance information is provided for reference only and reflects specifications published by the manufacturer at time of listing. Cannafull Spectrum Solutions makes no representation regarding the suitability of this product for any specific regulatory jurisdiction beyond the ETL listing noted above. Operators are solely responsible for verifying compliance with all applicable federal, state, and local regulations governing cultivation facility equipment. Specifications subject to change by manufacturer without notice; confirm current specifications with Cannafull Spectrum Solutions prior to large-volume procurement.