AC Infinity CLOUDFORGE T3 | 环保植物加湿器 | 4.5L | 智能控制 | 定向蒸发

Precision Control in Any Space.

Every uncontrolled hour inside an enclosed cultivation space is a compounding liability. When humidity swings without correction, vapor pressure deficit shifts outside the target window — and the plants respond before the operator does. Manual hygrometers require physical checks. Passive humidifiers run blind. The gap between what the environment is doing and what the operator knows it is doing is where yield variance is born. That gap is not a minor inconvenience; it is a silent, continuous drain on output consistency that no amount of post-harvest correction can recover.

After deployment, the environment stops being a variable the operator manages and becomes a parameter the system holds. Vapor delivery runs on schedule or on sensor trigger. VPD, relative humidity, and temperature are read in real time from a Swiss-manufactured Sensirion thermal alloy sensor positioned at canopy level. The unit responds before drift becomes damage. Refill intervals are flagged automatically. The operator's attention is freed from atmospheric babysitting and redirected toward the work that actually scales the operation.

The mechanism behind that outcome is a 24W ultrasonic vapor system drawing 100–240V AC at 50/60 Hz, operating across a temperature range of 41 to 122°F and a humidity range of 30 to 85% RH. The onboard controller presents six discrete operating modes — OFF, ON, AUTO, VPD, TIMER, and CYCLE — accessible through an LED touch interface. The Sensirion AG sensor delivers real-time humidity, temperature, and VPD readings through a waterproof SAE grade-316 steel gasket-sealed probe. A 20-degree fail-safe detection angle triggers low-water alerts before the tank runs dry. The unit integrates with UIS™ ecosystem controllers for app-based scheduling and intelligent programming, and operates independently of proprietary AC Infinity power adapters. In practical terms, the CLOUDFORGE T3 delivers automated atmospheric control across a 4.5L tank capacity at 24W continuous draw, with six programmable modes and live VPD feedback through a Sensirion-grade sensor array.

Where This Belongs (and Doesn't)

The CLOUDFORGE T3 is a low-voltage 24W atmospheric control device. It does not require dedicated circuit infrastructure. Consult your facility's HVAC and electrical documentation before integrating any environmental control device into an existing climate management stack.

How It Works

The CLOUDFORGE T3 generates ultrasonic vapor from a 4.5L reservoir and delivers it through a directional cap or flexible stretchable hose, allowing the operator to target specific canopy zones rather than diffusing output indiscriminately into the ambient space. The 24W power draw operates on universal voltage — 100 to 240V AC at 50/60 Hz — making it compatible with standard outlet infrastructure across licensed U.S. facilities without step-down conversion.

Atmospheric sensing is handled by a Swiss-manufactured Sensirion AG thermal alloy sensor, sealed behind a waterproof SAE grade-316 steel gasket. The probe mounts at canopy level and returns real-time readings for relative humidity, ambient temperature, and calculated vapor pressure deficit simultaneously. Those readings feed directly into the onboard controller's AUTO and VPD modes, enabling closed-loop correction without operator input. The fail-safe tilt detection system operates at a 20-degree angle threshold, triggering a low-water alert before the tank reaches a dry-run condition.

The LED touch interface exposes six operating modes: OFF, ON, AUTO, VPD, TIMER, and CYCLE. AUTO mode holds a user-defined humidity set point. VPD mode targets a calculated vapor pressure deficit value derived from live temperature and humidity data. TIMER and CYCLE modes allow time-based scheduling for photoperiod-aligned vapor delivery. The unit connects to UIS™ ecosystem controllers via the included UIS Extension Cord (M-M), enabling app-based programming and integration into a broader automated environmental control stack. The CLOUDFORGE T3 operates independently of proprietary AC Infinity power adapters, preserving setup flexibility across mixed-equipment configurations. In practical terms, the CLOUDFORGE T3 delivers six-mode automated atmospheric control with live Sensirion VPD sensing, a 4.5L tank capacity, and 24W continuous draw across a 41–122°F / 30–85% RH operating envelope.

Commercial Assurance

• Warranty: 2-year manufacturer warranty on the CLOUDFORGE T3 (AC-CFT3). Coverage applies to manufacturing defects under normal operating conditions.
• Returns: Free returns accepted within 30 days of delivery through Cannafull Spectrum Solutions.
• Authorized Source: Cannafull Spectrum Solutions is a factory-authorized dealer. All units are sourced through verified manufacturer supply channels — no gray-market inventory.
• Sensor Pedigree: Humidity and VPD sensing is performed by a Sensirion AG thermal alloy sensor — the same Swiss sensor manufacturer used in precision laboratory and pharmaceutical atmospheric monitoring equipment.
• UIS Ecosystem Compatibility: The CLOUDFORGE T3 is a verified node in the AC Infinity UIS™ ecosystem, enabling integration with compatible controllers for centralized automated environmental management.

System Integration

• UIS™ Ecosystem Controllers: Connects via the included UIS Extension Cord (M-M) to compatible AC Infinity UIS™ controllers for app-based scheduling, intelligent programming, and multi-device environmental automation.
• Power Infrastructure: Universal 100–240V AC input at 50/60 Hz — compatible with standard U.S. facility outlet infrastructure. Does not require proprietary AC Infinity power adapters.
• Sensor Probe Deployment: The included Sensor Probe and Probe Mount allow canopy-level VPD and humidity sensing, decoupling the measurement point from the unit body for accurate zone-specific data.
• Vapor Distribution: Directional cap and flexible stretchable hose enable targeted delivery to specific canopy zones, compatible with tent port routing and ducted distribution configurations.
• Water Quality: Distilled or reverse osmosis water is recommended to minimize mineral deposit accumulation and extend nebulizer service intervals. Nebulizer brush included for maintenance cycles.

Facility Integration Data

The following table models cumulative power draw and warranty asset value across multi-unit deployments of the CLOUDFORGE T3 (AC-CFT3) at the MAP price of $69.99 per unit. Use this data to support procurement justification and facility budgeting.

Capital outlay calculated at MAP price of $69.99/unit. Power draw calculated at rated 24W continuous. Actual energy consumption will vary based on operating mode and duty cycle. Consult facility electrical documentation before deploying multi-unit stacks on shared circuits.

Operator Field Notes

• Tank Duration: A full 4.5L tank runs approximately six days without a filter blower running — plan refill schedules accordingly to avoid low-water shutdowns during critical photoperiod windows.
• Water Quality Protocol: Use distilled or reverse osmosis water exclusively. Tap water mineral content accelerates nebulizer fouling and shortens service intervals between brush cleanings.
• Vapor Output Character: Output is cool and balanced — not thermally elevated — which prevents localized leaf surface temperature spikes near the delivery point.
• Acoustic Profile: Operating noise is minimal under normal conditions. The unit will not introduce audible interference in environments where noise discipline matters.
• Sensor Placement: Mount the probe at canopy level using the included Probe Mount. Sensor readings taken at unit height rather than canopy height will produce VPD values that do not reflect actual plant-zone conditions.
• Standalone vs. Integrated Operation: The CLOUDFORGE T3 functions as a fully capable standalone device without UIS™ controller connection. UIS™ integration adds app control and multi-device scheduling but is not required for VPD or AUTO mode operation.

Operator FAQ

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, and international destinations are not fulfilled.
• Fulfillment: Orders are processed and shipped from U.S.-based distribution. Tracking information is provided upon shipment confirmation.
• Returns: Free returns are accepted within 30 days of delivery. Items must be in original condition with all included components. Contact support before initiating a return.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions? Contact Cannafull Spectrum Solutions directly before ordering to confirm compatibility with your facility configuration.

What's in the Box

The following items are confirmed included with every CLOUDFORGE T3 (AC-CFT3) unit shipped by Cannafull Spectrum Solutions:

• 4.5L Humidifier Unit (x1)
• Flexible Hose (x1)
• Sensor Probe (x1)
• Probe Mount (x1)
• UIS Extension Cord M-M (x1)
• Nebulizer Brush (x1)
• Hook and Loop Tie (x1)

Included components are confirmed from manufacturer source data. Packaging contents are subject to change by the manufacturer without prior notice. If your shipment is missing any listed item, contact Cannafull Spectrum Solutions support within 7 days of delivery.

Regional Compliance & Deployment Notes

• The CLOUDFORGE T3 operates on universal 100–240V AC input at 50/60 Hz, compatible with standard U.S. electrical infrastructure across all contiguous states.
• Cannafull Spectrum Solutions fulfills orders within the contiguous 48 United States only. No shipments are made to Canadian provinces, U.S. territories, or international destinations.
• The CLOUDFORGE T3 is deployed in licensed cultivation facilities across the United States. Operators are responsible for confirming that atmospheric control equipment complies with applicable state and local facility licensing requirements in their jurisdiction.
• No Canadian compliance certifications (CSA, Health Canada) are applicable to this product listing. This product is sold and supported exclusively through U.S. distribution channels.
• The 2-year warranty is administered through AC Infinity's U.S. warranty program. Warranty claims must be initiated through authorized channels. Contact Cannafull Spectrum Solutions for warranty support coordination.

Compliance requirements for atmospheric control equipment vary by state and licensing jurisdiction. Cannafull Spectrum Solutions does not provide regulatory compliance consulting. Operators are solely responsible for verifying that equipment deployment meets all applicable local, state, and federal requirements for their licensed facility type.