AC Infinity 克隆项圈 | 带 8 辐设计的盘式插入件 | 2 英寸 | 100 件装

Quick Spec: SKU: AC-CNA2-100  |  Material: EVA Rubber (pH-Neutral)  |  Color: Black  |  Dimensions: 1.77 x 0.74 in. (4.5 x 1.9 cm)  |  Pack Quantity: 100  |  UPC: 819137023482  |  Manufacturer: AC Infinity Inc.

Precision Control in Any Space

Every propagation run carries a hidden cost that never appears on a line item: the variance introduced by equipment that was never designed to hold position. Generic foam inserts compress unevenly. Unsupported cuttings shift in the net cup. Stem contact points become pinch zones as tissue swells, and what began as a uniform cutting tray ends the propagation cycle as a mixed-maturity batch — some cuttings ahead of schedule, others set back by mechanical stress. That variance compounds across every subsequent stage, and the operator absorbs it as inconsistent canopy development, extended veg time, and reduced throughput per cycle. The enemy is not a single failure event; it is the slow, invisible drain of guesswork built into the physical infrastructure of the propagation system.

When the propagation infrastructure is standardized, the output becomes predictable. Every cutting enters the system held upright at a consistent angle, supported without compression, free to develop without mechanical interference. Net cup arrays run uniform. Batch maturity tightens. The operator stops managing individual outliers and starts managing throughput at the system level — because the physical layer beneath the cuttings is no longer a variable.

The mechanism behind that consistency is the 8-spoke EVA rubber disc geometry. The spoke architecture distributes contact force across eight radial points rather than concentrating pressure at a continuous collar edge, which is the failure mode of solid-ring inserts. As stem diameter increases through the propagation cycle, the spokes flex outward to relieve pressure rather than pinching — a passive, material-level response that requires no operator adjustment. The EVA rubber compound is durable, waterproof, and pH-neutral, meaning it introduces no chemical interference into the root zone environment. Each collar is reusable and compressible, seating securely in 2-inch net cups across both hydroponic and aeroponic configurations. The 100-pack format supports full-tray deployment without mid-run restocking. In practical terms, the AC-CNA2-100 delivers consistent upright cutting support across 100 net cup positions using a 1.77 x 0.74 in. (4.5 x 1.9 cm) pH-neutral EVA rubber disc insert with an 8-spoke pressure-relief design.

Where This Belongs (and Doesn't)

The AC-CNA2-100 is a passive propagation support component. It requires no electrical connection, no environmental control integration, and no installation beyond placement into a 2-inch net cup. Compatibility is determined by net cup diameter — confirm 2-inch cup sizing before deployment.

How It Works

The AC-CNA2-100 operates on a single mechanical principle: distributed contact force. A conventional solid-ring collar applies circumferential pressure as a continuous band around the cutting stem. When stem diameter increases — which it does as the cutting takes root and begins active growth — that continuous band has no relief mechanism. Pressure concentrates, tissue compresses, and vascular flow at the stem base is restricted. The 8-spoke design eliminates this failure mode by replacing the continuous contact surface with eight discrete radial spokes. Each spoke contacts the stem independently. As the stem expands, individual spokes flex outward, redistributing load across the array rather than concentrating it at a fixed circumference. The result is passive, continuous pressure relief that scales with stem development without any operator intervention.

Material selection reinforces the mechanical design. EVA (ethylene-vinyl acetate) rubber provides the flexibility required for spoke deflection while maintaining the structural memory to hold cutting position upright. The compound is waterproof, making it fully compatible with recirculating nutrient solution environments where standing moisture is continuous. pH neutrality is a non-negotiable requirement for any material in direct contact with the root zone — EVA rubber does not leach compounds that would alter solution chemistry or interfere with root development. The collar compresses for insertion into the net cup and expands to seat securely, eliminating the positional drift that occurs with undersized or oversized inserts. Reusability is a function of EVA's material durability — the collar retains its geometry and flex characteristics through repeated propagation cycles. In practical terms, the AC-CNA2-100 delivers 100 reusable, pH-neutral EVA rubber disc inserts measuring 1.77 x 0.74 in. (4.5 x 1.9 cm), each with an 8-spoke pressure-relief architecture sized for 2-inch net cups in hydroponic and aeroponic propagation systems.

Commercial Assurance

System Integration

• Compatible with any 2-inch net cup configuration in DWC, NFT, aeroponic, ebb-and-flow, and recirculating drip systems — no modification to existing infrastructure required.
• pH-neutral EVA rubber composition integrates without chemical interaction into established nutrient solution regimens — no solution chemistry adjustment required at deployment.
• Reusable collar format supports multi-cycle propagation scheduling — collars can be cleaned, sanitized, and redeployed without dimensional degradation.
• 100-pack quantity aligns with standard propagation tray configurations, enabling full-tray standardization in a single SKU order without partial-pack gaps.
• Passive mechanical design requires no controller pairing, no power source, and no integration with environmental automation systems — compatible with any propagation environment regardless of control architecture.

Facility Integration Data

The following ROI reference data is provided to support procurement planning for multi-tray and multi-room propagation operations. Figures are based on the 100-pack unit format at MAP pricing of $18.99 per pack.

Operator Field Notes

• Insert the collar into the 2-inch net cup before placing the cutting — the compression-fit seat is easier to establish before stem placement than after.
• The 8-spoke geometry accommodates a range of cutting stem diameters; no sizing selection is required within the standard cutting diameter range for the 2-inch cup format.
• For aeroponic systems with high-pressure misting cycles, confirm that the collar is fully seated in the net cup to prevent displacement from mist pressure at the cup opening.
• Between propagation cycles, collars can be removed, rinsed, and sanitized with standard facility sanitation protocols — EVA rubber is compatible with dilute hydrogen peroxide and isopropyl alcohol wipe-down.
• Collars that show permanent deformation or loss of flex response after extended use cycles should be replaced — the 100-pack format supports periodic collar rotation without significant per-unit cost impact at $0.19 per position.
• Store unused collars in a sealed container away from direct UV exposure — prolonged UV exposure can degrade EVA rubber flexibility over time in storage.

Operator FAQ

Shipping & Logistics

• Shipping Jurisdiction: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this jurisdiction cannot be fulfilled.
• Fulfillment: Orders are processed and shipped from authorized AC Infinity distribution inventory. Tracking information is provided upon shipment confirmation.
• Returns: Returns are accepted for defective or damaged units. Contact support@cannafullspec.com within the applicable return window with order number and documentation of the defect or damage.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions before ordering? Contact Cannafull Spectrum Solutions at support@cannafullspec.com or visit cannafullspec.com for current lead times and volume procurement options.

What's in the Box

The following items are confirmed included per AC Infinity manufacturer source data for SKU AC-CNA2-100:

• Clone Collars 2-Inch Disc Inserts with 8-Spoke Design — 100 units

No additional components, hardware, or accessories are specified in manufacturer source data for this SKU. Net cups, propagation systems, and nutrient solution equipment are not included. Confirm system compatibility with 2-inch net cup diameter before deployment.

Regional Compliance & Deployment Notes

• The AC-CNA2-100 is a passive propagation support component with no electrical, mechanical, or chemical active systems. No federal or state equipment certification requirements apply to this product category.
• pH-neutral EVA rubber construction is compatible with licensed commercial cultivation facility standards in all U.S. jurisdictions where hydroponic and aeroponic propagation is permitted.
• No IP rating, UL listing, or electrical compliance certification is applicable or required for this product.
• Operators in licensed U.S. cultivation facilities should confirm that propagation media and support components meet any facility-specific SOPs or state-level cultivation compliance requirements applicable to their license type.
• Cannafull Spectrum Solutions ships the AC-CNA2-100 to licensed commercial facilities across the contiguous United States. Canadian provinces and international jurisdictions are outside our shipping scope.

Product specifications, pricing, and availability are subject to change without notice. All data presented on this page is sourced from AC Infinity Inc. manufacturer documentation current at time of publication. Cannafull Spectrum Solutions makes no representations beyond confirmed manufacturer source data. Verify current specifications with Cannafull Spectrum Solutions before finalizing procurement decisions for large-scale deployments.