Mars Hydro TS 1000 150W Complete Grow Kit | 2.3 μmol/j PPE

Precision Control in Any Space

Inconsistent results in a compact cultivation space are rarely a plant problem — they are an equipment problem. When your light source degrades silently over time, when your ventilation runs at a fixed speed with no feedback loop, and when your environmental controls are disconnected from one another, every cycle introduces variance you cannot account for. The cost is not always visible in a single harvest. It accumulates across cycles: uneven canopy density, unpredictable finish windows, and the compounding inefficiency of running infrastructure that was never designed to work together. Guesswork and equipment that fights you are not inconveniences — they are the operational ceiling that limits what a compact cultivation space can actually produce.

After deployment, the picture changes. The canopy receives uniform photon distribution from a purpose-built LED array positioned over a reflective Mylar interior that refracts and amplifies available light rather than absorbing it. Ventilation runs at operator-selected speeds across a 10-speed range, keeping temperature and humidity within target parameters without manual intervention between checks. Odor and particulate management are handled inline by an activated carbon filter integrated into the same 4" duct circuit. Every component in the system was specified to operate together, which means the variables that typically introduce cycle-to-cycle inconsistency are structurally removed from the equation.

The mechanism behind that outcome is a 150W BridgeLux LED array — 354 individual chips — producing 343 µmol/s PPF at a photon efficacy of 2.3 µmol/j. That efficacy rating represents a 50% improvement over legacy HPS/MH systems and delivers equivalent canopy output to a 250W HPS fixture at 40% lower power consumption. The spectral architecture covers 660–665 nm deep red alongside 3200–4200K and 5200–6800K white channels, providing a full-cycle spectrum without supplemental fixtures. The enclosure is an 80×80×160 cm (2.6'×2.6'×5.3') 1680D canvas tent with a metal frame rated to 50 kg / 110 lb support capacity, and the ventilation circuit delivers 10–205 CFM at a measured 28 dBA noise floor. In practical terms, the Mars Hydro TS 1000 Kit delivers 343 µmol/s PPF at 2.3 µmol/j PPE across a 2.6×2.6 ft canopy footprint at 150W draw, replacing 250W HPS output in a fully enclosed, ventilated, and filtered system.

Where This Belongs (and Doesn't)

Electrical and HVAC integration should be assessed by a qualified technician prior to deployment. Ensure your circuit supports the required amperage draw and that ambient room ventilation is adequate to handle exhaust from the 4" duct outlet. Do not operate the enclosed tent system in spaces with ambient temperatures exceeding manufacturer-specified operating ranges.

How It Works

The TS 1000 fixture is built around 354 BridgeLux LED chips operating at a combined input of 150W (150±5% at AC120V, 148±5% at AC240V). The chip array is mounted behind a patented reflector designed to capture and redirect photons that would otherwise scatter outside the canopy plane, concentrating usable light intensity at the plant surface. The spectral output spans 660–665 nm in the deep red channel and covers 3200–4200K and 5200–6800K white channels, providing a full-cycle photon profile without requiring separate vegetative or flowering fixtures. Total photon output is 343 µmol/s PPF at a photon efficacy of 2.3 µmol/j. The fixture produces 511.5 BTU of thermal output and is passively cooled — no moving parts in the light head, no fan noise contribution from the fixture itself.

The enclosure is an 80×80×160 cm (2.6'×2.6'×5.3') tent constructed from 1680D canvas with a diamond-pattern reflective Mylar interior. The Mylar lining refracts available photons back into the canopy rather than absorbing them, effectively increasing usable light intensity without increasing fixture wattage. The metal frame is rated to a support capacity of 50 kg / 110 lb — sufficient to carry the light, carbon filter, fan assembly, and any additional hanging infrastructure simultaneously. Vent ports include 2×7.5 cm, 2×15 cm, and 1×20 cm openings, with a 1×25×25 cm mesh window for passive intake. The tent ships with one front door access panel.

Ventilation is handled by a 4" inline duct fan with a 10-speed controller, delivering 10–205 CFM of airflow at a measured noise floor of 28 dBA. The fan connects to a 4" activated carbon filter via a 4"/10 m duct tube, providing inline odor elimination and particulate management without requiring a secondary filtration circuit. The complete accessory package includes a 6" clip-on fan, grow room glasses, 80×80 cm trellis plant netting, four 5-gallon grow bags, a timer, a humidity thermometer, pruning shears, two corner shelves, two duct filter vent covers, and two rope hangers — all components required to bring the space to operational status without supplemental procurement. In practical terms, the Mars Hydro TS 1000 Kit delivers 343 µmol/s PPF at 2.3 µmol/j PPE across a 2.6×2.6 ft enclosed canopy at 150W draw, with integrated 10–205 CFM ventilation and activated carbon filtration in a single deployable system.

Commercial Assurance

• ETL Certified: The TS 1000 fixture carries ETL certification alongside CE, RoHS, and UKCA compliance, meeting the electrical safety standards required for licensed facility deployment across the United States.
• 5-Year Light Warranty: The Mars Hydro TS 1000 LED fixture is covered by a 5-year manufacturer warranty. Warranty terms apply to the light unit as specified in manufacturer documentation.
• Authorized Distribution: Cannafull Spectrum Solutions is a factory-authorized dealer. All units are sourced through verified supply channels with full manufacturer warranty support intact.
• Photon Output Verified: PPF of 343 µmol/s and PPE of 2.3 µmol/j are manufacturer-published values for the TS 1000 at 150W input — not interpolated or estimated figures.
• Structural Rating: The tent frame is rated to 50 kg / 110 lb support capacity, verified against manufacturer specifications for the 80×80×160 cm enclosure.

System Integration

• Power Circuit: The TS 1000 fixture draws 150W at AC120V (150±5%) or 148W at AC240V (148±5%). Verify that the deployment circuit supports the required amperage before installation. The fixture and fan assembly should be on a dedicated or appropriately rated circuit.
• Ventilation Exhaust: The 4" duct outlet must be routed to an appropriate exhaust point. The included 4"/10 m duct tube provides routing flexibility, but the exhaust destination must be confirmed prior to sealing the tent for operation.
• Environmental Monitoring: The included humidity thermometer provides baseline environmental data. For facilities with tighter environmental tolerances, supplemental monitoring equipment should be integrated into the same space.
• Canopy Management: The included 80×80 cm trellis netting is sized for the tent footprint. Operators running two plants should plan canopy training to maintain uniform light distribution across the full 2.6×2.6 ft floor area.
• Scalability: This kit is a single-zone deployment unit. Operators scaling to multi-zone configurations should evaluate bar-style fixtures with daisy-chain capability for larger canopy footprints beyond the 2.6×2.6 ft envelope.

Facility Integration Data

The following table models electrical load and procurement cost across multi-unit deployments of the Mars Hydro TS 1000 Kit at the current sale price of US$299.99 per unit, for operators running parallel single-zone stations.

Fleet cost calculated at US$299.99 per unit (sale price). HPS equivalent based on manufacturer's 250W HPS replacement claim per unit. Electrical load figures are estimates; actual draw subject to ±5% variance per unit specification.

Operator Field Notes

• Noise Floor Confirmation: The 4" inline fan operates at a measured 28 dBA at its 10-speed range — relevant for facilities in mixed-use buildings or spaces with ambient noise compliance requirements.
• Frame Load Planning: The 50 kg / 110 lb rated frame capacity should be calculated against the combined weight of the light fixture, carbon filter, fan, and any additional hanging accessories before final rigging.
• Duct Routing: The included 4"/10 m duct tube provides adequate reach for most single-room deployments, but operators should confirm exhaust routing before sealing the tent. Kinking the duct reduces effective CFM below the 205 CFM rated maximum.
• Timer Integration: The included timer supports basic photoperiod scheduling. Operators requiring precision dimming or multi-zone scheduling should evaluate controller-compatible fixtures for those zones.
• Mylar Maintenance: The diamond-pattern Mylar interior should be inspected periodically for tears or delamination. Compromised reflective surface area directly reduces effective PPFD at the canopy without any change in fixture output.
• Warranty Registration: The 5-year light warranty applies to the TS 1000 fixture. Retain purchase documentation and register the product per Mars Hydro's warranty process to ensure coverage is active from the deployment date.

Operator FAQ

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, or international addresses cannot be processed.
• Fulfillment: Orders are processed and shipped from authorized distribution points. Estimated transit times are provided at checkout and vary by destination. Freight damage claims must be initiated within 48 hours of delivery confirmation.
• Returns: Returns are accepted on unopened, non-defective units in original manufacturer packaging within the return window specified in our Return Policy. Defective units are handled under the applicable manufacturer warranty process.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

For order support, bulk pricing inquiries, or warranty claims, contact Cannafull Spectrum Solutions directly through cannafullspec.com.

What's in the Box

The following items are confirmed as included with the Mars Hydro TS 1000 Complete Grow Kit (SKU: TS-1000-SET-2509) per manufacturer source documentation:

• 1× Mars Hydro TS 1000 150W LED Grow Light
• 1× 80×80×160 cm (2.6'×2.6'×5.3') 1680D Canvas Grow Tent with metal frame
• 1× 4" Inline Duct Fan with 10-speed controller
• 1× 4" Activated Carbon Filter
• 1× 4" / 10 m Duct Tube
• 1× 6" Clip-On Fan
• 1× Grow Room Glasses
• 1× AC 80×80 cm Trellis Plant Netting
• 4× 5-Gallon Grow Bags
• 1× Timer
• 1× Humidity Thermometer
• 1× Pruning Shears
• 2× Corner Shelves
• 2× Duct Filter Vent Covers
• 2× Rope Hangers

Accessory list confirmed from manufacturer source documentation. Cannafull Spectrum Solutions is not responsible for manufacturer packaging changes made after the date of this listing. If any item is missing from your shipment, contact our support team within 48 hours of delivery.

Regional Compliance & Deployment Notes

• ETL Certification: The Mars Hydro TS 1000 fixture is ETL certified, confirming compliance with applicable U.S. electrical safety standards for listed equipment. ETL certification is recognized by authorities having jurisdiction (AHJ) across licensed facilities in the United States.
• CE & UKCA: CE and UKCA certifications are included on the fixture for European and UK market compliance. These certifications are supplemental to ETL for U.S.-based deployments.
• RoHS Compliance: The fixture meets RoHS restricted hazardous substance requirements, confirming the absence of regulated materials including lead, mercury, and cadmium in the LED assembly.
• State Licensing Variance: Electrical and facility compliance requirements for licensed cultivation operations vary by state. Operators are responsible for confirming that the TS 1000 Kit meets the specific requirements of their state licensing authority and any applicable local electrical codes prior to installation.
• Shipping Jurisdiction: This product is available for shipment within the contiguous 48 United States only through Cannafull Spectrum Solutions. Cannafull Spectrum Solutions does not ship to Canadian provinces or international addresses.

Compliance certifications are manufacturer-issued and apply to the TS 1000 fixture as specified. Cannafull Spectrum Solutions makes no independent certification claims beyond those issued by the manufacturer. Operators should verify current certification status with Mars Hydro for any jurisdiction-specific compliance requirements. Product specifications, pricing, and availability are subject to change without notice. All figures sourced from Mars Hydro manufacturer documentation current at time of listing.