Mars Hydro FC 6500 EVO 730W LED Grow Light | 3.14 μmol/J

Precision Control in Any Space

Every cycle lost to inconsistent canopy coverage is a cycle that cannot be recovered. When the light source above your canopy is delivering uneven photon distribution — hot zones burning the tops, dark edges starving lateral growth — the variance compounds silently across every harvest. Equipment that requires manual intervention to compensate for its own design limitations is not a tool; it is a liability. Lamp depreciation curves that begin degrading output from day one mean the intensity your plants received in week two of flower is not the intensity they receive in week eight. That gap is not a minor inefficiency. It is the difference between a consistent, predictable yield and a result you cannot replicate or defend to a buyer.

After deployment, the operational picture changes materially. A canopy running under the FC 6500 EVO receives stable, full-spectrum output from a passively cooled bar array that requires no lamp swaps, no ballast maintenance, and no manual intensity corrections to compensate for thermal drift. Scheduling is handled at the fixture level through dimmable control, allowing operators to dial intensity to the precise growth stage — seedling establishment, vegetative expansion, or peak flower — without swapping hardware or reconfiguring rooms. The detachable driver architecture keeps heat out of the canopy zone, and the wave-shaped heat sink dissipates thermal load passively, eliminating the fan noise and mechanical failure points that come with active cooling systems. The result is a room that runs on a defined protocol, not on daily judgment calls.

The mechanism behind that operational stability is the Samsung LM301H EVO diode array — the same diode specification used in fixtures sold at 30 to 40 percent higher price points — delivering a system efficacy of 3.14 µmol/J at 730W ±5% draw. The full-spectrum output covers the complete photosynthetically active range from seedling through late flower, with no spectral gaps that would require supplemental fixtures. Dimmable control allows intensity adjustment across growth stages without hardware changes, and the foldable bar-style design supports scalable deployment through daisy-chain configurations, allowing multi-light rooms to be managed from a single control point. The iConnect system enables networked scheduling across a fleet of fixtures without per-unit manual adjustment. In practical terms, the FC 6500 EVO delivers 3.14 µmol/J at 730W across a 5×5 ft flower canopy with passive thermal management and full dimmable control.

Where This Belongs (and Doesn't)

Electrical note: The FC 6500 EVO draws 730W ±5%. Verify circuit capacity and breaker rating before installation. Consult a licensed electrician for multi-light daisy-chain configurations. Thermal note: Passive cooling is rated for standard ambient operating temperatures; confirm room HVAC capacity when deploying multiple units in sealed environments.

How It Works

The FC 6500 EVO is built around Samsung LM301H EVO diodes — a current-generation diode specification that delivers high photon output per watt of electrical input. At 730W ±5%, the fixture achieves a system efficacy of 3.14 µmol/J, meaning for every joule of energy consumed, 3.14 micromoles of photosynthetically active photons are delivered to the canopy. This is not a peak-point measurement under ideal lab conditions; it is the rated system efficacy of the complete fixture at operating power.

The bar-style form factor distributes the diode array across six light bars, spreading photon output across the canopy footprint rather than concentrating it from a single central source. This geometry reduces hot-spot intensity directly beneath the fixture and improves uniformity at canopy level across the 5×5 ft coverage zone. The foldable design allows the bars to be adjusted for mounting configuration and simplifies transport and installation in multi-room facilities.

Thermal management is handled entirely through passive means: a wave-shaped heat sink dissipates thermal load from the diode array without fans or moving parts, and the detachable driver removes the primary heat-generating electrical component from the fixture body, keeping operating temperatures at the canopy level lower and extending diode lifespan. The full-spectrum output covers all stages of the growth cycle — seedling, vegetative, and flower — without requiring fixture swaps or supplemental lighting for spectral gaps. Dimmable control allows intensity to be set to the precise requirement of each growth stage, and the iConnect system enables daisy-chain networking of multiple FC 6500 EVO units for fleet-level scheduling from a single control interface. In practical terms, the FC 6500 EVO delivers 3.14 µmol/J across a 5×5 ft canopy at 730W with passive thermal management, a detachable driver, and iConnect-enabled multi-fixture control.

Commercial Assurance

• Warranty: Up to 5-year manufacturer warranty on the FC 6500 EVO (FC-6500-2507)
• Diode Specification: Samsung LM301H EVO — current-generation, commercially validated diode array
• Thermal Architecture: Passive cooling via wave-shaped heat sink and detachable driver — no moving parts, no fan failure risk
• Control Architecture: Dimmable intensity control with iConnect daisy-chain capability for multi-fixture fleet management
• Customer Support: Lifetime customer support per manufacturer commitment
• Authorized Channel: Cannafull Spectrum Solutions is a factory-authorized dealer. Warranty coverage requires purchase through an authorized channel.

System Integration

• iConnect Daisy-Chain: Multiple FC 6500 EVO units can be networked via iConnect for centralized scheduling and intensity control across a multi-light room without per-unit manual adjustment
• Detachable Driver: The external driver can be mounted remotely from the fixture body, reducing radiant heat load in the canopy zone and simplifying driver replacement if needed
• Dimmable Control: Adjustable intensity output allows operators to match photon delivery to the specific DLI target of each growth stage — seedling, vegetative, or flower — without hardware changes
• Foldable Bar Design: The six-bar foldable configuration supports installation in varied room geometries and simplifies fixture transport between rooms during facility reconfiguration
• CO2 Compatibility: Rated for CO2-enriched cultivation environments where elevated photon intensity is required to drive photosynthesis at elevated CO2 concentrations

Facility Integration Data

The following ROI reference data is based on the FC 6500 EVO's rated 730W draw and a sale price of US$499.99 per unit; operators should verify local utility rates and apply facility-specific electrical costs before finalizing procurement projections.

Operator Field Note

• Dimmer Protocol: Run the fixture at reduced intensity during the first 100 hours of operation to allow diode stabilization before pushing to full output in peak flower
• Driver Placement: Mount the detachable driver outside the primary canopy zone or on a room wall to minimize radiant heat contribution at plant level — particularly relevant in sealed CO2 rooms where thermal load management is critical
• iConnect Sequencing: When daisy-chaining multiple FC 6500 EVO units, verify the total wattage load against circuit capacity before enabling simultaneous full-power operation across the chain
• Mounting Height: Adjust bar height relative to canopy stage — higher during seedling and early vegetative phases to reduce intensity, lower as canopy develops and DLI targets increase through flower
• CO2 Pairing: The FC 6500 EVO is rated for CO2-enriched environments; when running elevated CO2 (1,000–1,500 ppm), ensure photon intensity is matched to CO2 concentration to avoid photosynthetic saturation limits that waste both light and gas
• Warranty Documentation: Retain purchase confirmation from Cannafull Spectrum Solutions as proof of authorized-channel purchase; warranty claims require documentation of purchase source

Operator FAQ

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, and international destinations cannot be fulfilled.
• Carrier & Transit: Fixtures are shipped via ground freight or parcel carrier depending on order size. Multi-unit fleet orders may ship on pallet. Estimated transit times are provided at checkout and are carrier-dependent.
• Returns: Returns are accepted for defective units per the manufacturer warranty process. Non-defective returns are subject to the Cannafull Spectrum Solutions Return Policy. Contact support@cannafullspec.com before initiating any return.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

For fleet orders, freight quotes, or pre-purchase technical questions: support@cannafullspec.com

What's in the Box

• Mars Hydro FC 6500 EVO LED grow light fixture (6-bar foldable configuration)
• Detachable driver unit
• Hanging hardware (ratchet hangers or equivalent per manufacturer pack-out)
• Power cord
• User manual / setup documentation

Note: Pack-out contents are based on manufacturer standard configuration for SKU FC-6500-2507. Cannafull Spectrum Solutions cannot guarantee inclusion of accessory items not confirmed in manufacturer documentation. Contact support@cannafullspec.com to verify current pack-out before ordering if specific accessories are required for your installation.

Regional Compliance & Deployment Notes

• Jurisdiction: The FC 6500 EVO is sold and shipped for deployment in licensed commercial facilities across the contiguous United States. Cannafull Spectrum Solutions does not ship to Canadian provinces or international destinations.
• Electrical Compliance: Operators are responsible for verifying that fixture installation meets all applicable local, state, and national electrical codes (NEC). Consult a licensed electrician before installation, particularly for multi-unit daisy-chain configurations drawing aggregate loads above single-circuit capacity.
• Licensing: The FC 6500 EVO is a cultivation equipment product. Operators are solely responsible for ensuring their cultivation activities comply with all applicable state and local licensing requirements. Cannafull Spectrum Solutions makes no representation regarding the licensing status of any buyer or facility.
• UL Listing: Buyers operating in jurisdictions that require UL-listed fixtures for commercial cultivation facilities should verify the FC 6500 EVO's certification status with the manufacturer prior to purchase. Cannafull Spectrum Solutions does not warrant compliance with jurisdiction-specific equipment certification mandates.
• Warranty Jurisdiction: Manufacturer warranty terms apply to purchases made through authorized U.S. dealers. Warranty service is administered through the manufacturer's U.S. support channel. Contact support@cannafullspec.com for warranty claim routing.

Compliance information is provided for reference only and does not constitute legal or regulatory advice. Cannafull Spectrum Solutions is not responsible for operator compliance with state, local, or federal regulations governing cultivation facility equipment. Verify all applicable requirements with your licensing authority and a qualified electrician before deployment. Specifications subject to change by manufacturer without notice; confirm current specifications at cannafullspec.com or by contacting support@cannafullspec.com prior to ordering.