Harvest Right Medium Freeze Dryer Silicone Mats Set of 5 | 17-1/4" x 6-7/8"

Quick Spec: 17-1/4″ x 6-7/8″ per mat | Qty: 5 mats per pack | Compatible: Medium Harvest Right PRO freeze dryer trays | SKU: N-HR-MATS-MD-PACK

Precision Contact. Zero Compromise. Every Cycle.

Every batch that runs on an unlined tray is a batch running on borrowed time. Product sticks, tears, and fragments during extraction. Residue accumulates across the tray surface between cycles, creating contamination vectors that compound over a production week. The sublimation interface — the critical contact layer between your material and the freeze dryer shelf — becomes unpredictable when the tray surface itself is inconsistent. That variability is not a minor inconvenience; it is a direct tax on potency preservation, terpene retention, and the shelf stability your end product depends on. Operators absorb this cost silently, batch after batch, attributing yield loss to the material rather than to the processing surface beneath it.

After deployment, the tray environment changes fundamentally. Each mat provides a uniform, non-stick sublimation surface that releases product cleanly at cycle completion — no tearing, no residue transfer, no cross-batch contamination from tray buildup. Extraction time per batch decreases. Product integrity at the point of removal is consistent across all five trays simultaneously, which means batch processing output is predictable rather than variable. The facility runs cleaner, cycles turn faster, and the lyophilization process performs the way pharmaceutical-grade sublimation is designed to perform: with full contact uniformity from tray edge to tray edge.

The mechanism is dimensional precision. Each mat in this five-pack is cut to 17-1/4″ x 6-7/8″ — the exact footprint of Medium Harvest Right PRO freeze dryer trays — ensuring full-surface coverage with no overhang that would disrupt chamber airflow or no gap that would leave bare tray exposed at the edges. Silicone's thermal stability across the freeze-dry temperature range means the mat does not stiffen, crack, or off-gas during the sublimation phase, preserving the integrity of the contact layer throughout the full cycle. Five mats per pack provides complete coverage for a fully loaded Medium PRO unit in a single order. In practical terms, the N-HR-MATS-MD-PACK delivers full-tray sublimation contact across five 17-1/4″ x 6-7/8″ Medium PRO tray surfaces with zero dimensional compromise per mat.

Where This Belongs (and Doesn't)

These mats are designed exclusively for use with Medium Harvest Right PRO freeze dryer trays. Do not attempt to use with Large, Small, or non-PRO Harvest Right tray configurations. Dimensional mismatch will compromise sublimation contact and may interfere with tray seating within the freeze dryer chamber.

How It Works

The N-HR-MATS-MD-PACK functions as a precision sublimation interface layer. During a lyophilization cycle, the freeze dryer shelf drops to sub-zero temperatures, and the material on the tray undergoes sublimation — ice transitions directly to vapor without passing through a liquid phase. The quality of that sublimation event is directly influenced by the uniformity of the contact surface beneath the material. A silicone mat at the exact tray dimension ensures that thermal transfer from the shelf to the material is consistent across the entire tray footprint, with no cold spots caused by air gaps at the edges and no hot spots caused by mat bunching or overhang.

Silicone's material properties are specifically suited to this application. It remains flexible and dimensionally stable across the full temperature range of the freeze-dry cycle, does not absorb moisture between cycles, and releases product cleanly without requiring solvents or mechanical scraping. This means the mat itself does not become a contamination source over repeated use. The 17-1/4″ x 6-7/8″ cut dimension matches the Medium Harvest Right PRO tray exactly, so the mat lays flat, seats fully, and does not shift during loading or cycle operation. Five mats per pack provides a complete set for a fully loaded Medium PRO unit, enabling simultaneous standardized processing across all trays in a single batch. In practical terms, the N-HR-MATS-MD-PACK delivers a dimensionally exact, thermally stable sublimation contact surface across all five Medium PRO trays in a single pack, eliminating the tray-surface variability that degrades batch consistency over a production run.

System Integration

• Designed for direct drop-in use with Medium Harvest Right PRO freeze dryer trays — no modification, trimming, or adhesive required.
• Compatible with the full Smart Freeze™ automated cycle architecture; mat presence does not interfere with sensor operation or shelf temperature management.
• Supports batch processing standardization across multi-unit production lines when each Medium PRO unit is equipped with a full five-mat set.
• Cleanable between cycles without chemical solvents — silicone surface resists absorption and releases residue under standard rinse protocols, maintaining pharmaceutical-grade processing hygiene.
• Pairs with Harvest Right PRO tray accessories and stacking configurations without dimensional conflict.

Facility Integration Data

The table below provides fleet-scale procurement reference data for facilities operating multiple Medium Harvest Right PRO freeze dryer units, where tray mat standardization across the production line is a baseline operational requirement.

Operator Field Notes

• Confirm tray model before ordering: these mats are cut for Medium Harvest Right PRO trays only. Large and Small PRO tray dimensions are different — a dimensional mismatch will not be corrected by trimming without compromising edge coverage.
• One pack of five covers a fully loaded Medium PRO unit. Facilities running multiple units should order one pack per unit to maintain standardized tray-surface conditions across the production line.
• Inspect mats for flatness before each cycle. A mat that has developed a curl or edge lift from improper storage will create an air gap at the tray perimeter, reducing sublimation contact uniformity at the edges.
• Store mats flat or rolled loosely — do not fold. Fold creases in silicone create permanent deformation lines that disrupt the contact surface and cannot be reversed.
• Clean between cycles using warm water and a non-abrasive wipe. Avoid petroleum-based solvents, which can degrade silicone surface integrity over repeated exposure.
• When rotating mats out of service, replace the full five-mat set simultaneously to maintain uniform surface condition across all trays in the unit — staggered replacement introduces surface variability between trays.

Operator FAQ

Shipping & Logistics

• Shipping Method: Free Curbside Delivery via FedEx. No freight surcharge on this SKU.
• Delivery Timeline: Tracking details are provided within 14 business days after order placement. Allow 1-2 additional business days for the tracking number to populate in the carrier system before attempting to trace the shipment.
• Returns: 30-day return window from delivery. Products must be unused, uninstalled, and in original packaging. A 35% restocking fee applies to all qualifying returns.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.
• Jurisdiction: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this region cannot be fulfilled.

Questions about your order? Contact Cannafull Spectrum Solutions at support@cannafullspec.com or visit cannafullspec.com for full logistics and support documentation.

What's in the Box

• 5 x Silicone Tray Mats — 17-1/4″ x 6-7/8″ each, cut for Medium Harvest Right PRO freeze dryer trays

Box contents confirmed from manufacturer source data. No additional accessories, documentation, or hardware are listed as included with this SKU. If your shipment is missing any of the above items, contact Cannafull Spectrum Solutions immediately upon receipt. Do not discard original packaging until contents have been verified.

Regional Compliance & Deployment Notes

• This product is a passive tray accessory with no electrical, chemical, or pressure-bearing components. No federal or state equipment licensing is required for purchase or deployment of silicone tray mats.
• Operators in licensed post-harvest processing facilities should confirm that all freeze dryer equipment and associated accessories comply with applicable state cannabis processing regulations in their jurisdiction prior to deployment.
• Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders cannot be fulfilled to addresses outside this region.
• Compliance with state-specific food-contact material regulations (where applicable to cannabis processing environments) is the responsibility of the purchasing facility. Silicone is widely accepted as a food-safe material; however, operators should verify applicability under their specific state regulatory framework.
• This product is sold for use in lawful commercial processing operations only. Purchaser assumes full responsibility for compliance with applicable federal, state, and local regulations governing the use of this equipment in their facility.

Regulatory frameworks governing cannabis post-harvest processing vary by state and are subject to change. The information provided here is for general reference only and does not constitute legal or compliance advice. Cannafull Spectrum Solutions makes no representations regarding the regulatory status of freeze dryer accessories in any specific jurisdiction. Consult qualified legal counsel or your state regulatory authority for compliance determinations applicable to your facility.