Codo para enfriador de agua V-SYSTEM de Alien Hydroponics: espiga de 25 mm, rosca hembra de 1"

Quick Spec: SKU BD101-0017  |  Barb: 25mm  |  Thread: 1" Female  |  Fitting Type: Elbow  |  System Line: V-SYSTEM Water Chiller  |  Compatibility: AERO Systems  |  Price: $9.92 USD

Precision Control in Any Space

Every irrigation circuit has a weak point, and in compact or custom-routed chiller plumbing, that weak point is almost always a fitting that was never designed for the application. A barb that doesn't seat cleanly, a thread that cross-engages under torque, a generic elbow that weeps under thermal cycling — these are not dramatic failures. They are slow, silent costs: nutrient solution lost to drip, reservoir temperatures that drift because flow is interrupted, and maintenance windows that consume hours that should be going into canopy management. The enemy is not a single catastrophic leak. It is the accumulation of small mismatches that erode the consistency your operation depends on.

After deployment, the plumbing circuit behaves the way it was drawn. Chilled water moves from reservoir to canopy zone and back without pressure drop at the elbow, without the thermal creep that loosens a poorly-seated barb over successive temperature cycles, and without the diagnostic time spent tracing a slow drip to its source. The irrigation schedule runs on the timer, not on the operator's availability to monitor fittings. That is what a correctly specified elbow delivers: the removal of a variable that should never have been a variable in the first place.

The mechanism is straightforward. The V-SYSTEM Water Chiller Elbow is dimensioned to the V-SYSTEM product line — 25mm barb on one end, 1" female thread on the other — which means the barb seats against tubing that was selected for this circuit, and the female thread engages a male-threaded port that was machined to the same standard. There is no adapter stack between the fitting and the system. Compatibility with AERO Systems is confirmed by the manufacturer, which means the elbow has been validated against the flow rates, pressures, and fluid temperatures that AERO-configured circuits produce. In practical terms, the V-SYSTEM Chiller Elbow (BD101-0017) provides a manufacturer-dimensioned 25mm barb-to-1" female thread transition in a single elbow body, eliminating the adapter count and the leak-surface area that multi-piece improvised assemblies introduce.

Where This Belongs (and Doesn't)

This fitting is a plumbing component for fluid circuits only. It is not rated for compressed gas, electrical conduit, or structural applications. Installation should follow the V-SYSTEM manufacturer's torque and seating specifications. If your circuit operates at pressures or temperatures outside the V-SYSTEM design envelope, consult the manufacturer before installation.

How It Works

The elbow body provides a 90-degree directional transition between a 25mm barb connection and a 1" female threaded port. The barb end is dimensioned to accept 25mm-bore tubing; the barb profile creates a mechanical interference fit that resists pull-out and seals against fluid bypass when the tubing is properly seated and clamped. The 1" female thread engages a corresponding 1" male-threaded port on the V-SYSTEM chiller or AERO System manifold, providing a threaded seal that can be made wrench-tight without requiring adhesive or tape under normal operating conditions — though thread sealant application should follow the V-SYSTEM installation guidelines for the specific circuit pressure and fluid type in use.

Because the fitting is part of the V-SYSTEM Water Chiller product line and carries confirmed AERO Systems compatibility, the dimensional tolerances — barb outer diameter, thread pitch, and elbow body geometry — are matched to the components already present in a correctly assembled V-SYSTEM or AERO circuit. This eliminates the tolerance stack-up that occurs when generic fittings are substituted: a generic 25mm barb may be nominally correct but dimensionally loose against V-SYSTEM tubing, and a generic 1" female thread may engage but not seal cleanly against an AERO port machined to a tighter standard. In practical terms, the V-SYSTEM Chiller Elbow (BD101-0017) delivers a single-body 25mm-to-1" female elbow transition that is dimensionally validated for V-SYSTEM and AERO plumbing circuits, removing the tolerance and compatibility risk that generic substitutes introduce.

Commercial Assurance

System Integration

• V-SYSTEM Water Chiller Line: Designed as a native component of the V-SYSTEM Water Chiller product line; no dimensional modification required for standard V-SYSTEM circuit assembly.
• AERO Systems Compatibility: Manufacturer-confirmed compatibility with AERO Systems; suitable for integration at chiller inlet/outlet ports and manifold connections within AERO-configured irrigation circuits.
• Top-Feed and Drain-to-Waste Circuits: Elbow geometry supports directional routing in space-constrained top-feed and drain-to-waste configurations where straight fittings cannot clear adjacent equipment or reservoir walls.
• Recirculating Reservoir Loops: 25mm barb and 1" female thread sizing is consistent with standard V-SYSTEM reservoir plumbing; suitable for use at pump inlet, chiller outlet, and return-line directional changes.
• Replacement and Maintenance: Stocked as a discrete SKU (BD101-0017) to support field replacement without requiring full assembly disassembly or sourcing from non-authorized channels.

Facility Integration Data

For operators running multi-unit V-SYSTEM or AERO chiller installations, the per-unit cost of maintaining a stocked inventory of manufacturer-dimensioned elbows is negligible relative to the labor cost of a single unplanned maintenance event caused by a failed or mismatched fitting.

Operator Field Notes

• Seat the barb fully before clamping: The 25mm barb must be pushed to full depth against the tubing stop before a hose clamp is applied. Partial seating under clamp pressure creates a stress concentration at the barb shoulder that can initiate a slow leak under thermal cycling.
• Thread engagement before torque: Hand-thread the 1" female end fully before applying wrench torque. Cross-threading a female fitting onto a male port is a common cause of thread damage that requires port repair or full manifold replacement — a cost that is not proportionate to the fitting price.
• Thread sealant selection: Follow V-SYSTEM installation documentation for thread sealant type. PTFE tape is standard for most water-service threads, but some chiller circuits specify liquid sealant for vibration resistance. Using the wrong sealant type can contaminate nutrient solution in recirculating reservoir configurations.
• Inspect at scheduled maintenance intervals: Elbow fittings in chiller circuits are subject to repeated thermal expansion and contraction. Include barb-seat and thread-engagement inspection in scheduled maintenance cycles, not only in response to visible leaks.
• Stock as a consumable: At $9.92 USD per unit, this fitting is priced as a consumable replacement part. Maintaining one spare per active chiller circuit eliminates sourcing lead time as a factor in unplanned downtime.
• Confirm port size before ordering: The 1" female thread on this elbow is specific to V-SYSTEM and AERO System port standards. Verify the male port size on your chiller or manifold before ordering if your installation includes non-V-SYSTEM components.

Operator FAQ

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Alaska, Hawaii, U.S. territories, and international destinations including Canada are not serviceable.
• Fulfillment: SKU BD101-0017 is a small-parcel item. Standard carrier fulfillment applies. Estimated transit times are provided at checkout and are subject to carrier availability and destination.
• Returns: Returns are accepted for defective or incorrectly shipped items. Non-defective returns are subject to the Cannafull Spectrum Solutions Return Policy. Contact support before initiating a return to receive a return authorization.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about this order? Contact Cannafull Spectrum Solutions at cannafullspec.com or through the contact form on the product page.

What's in the Box

• 1x V-SYSTEM Water Chiller Elbow — 25mm Barb / 1" Female Thread (SKU BD101-0017)

Note: Hose clamps, thread sealant, and installation hardware are not included. Confirm that all required installation materials are on hand before beginning circuit assembly. Packaging contents are as listed above based on available manufacturer source data; contact Cannafull Spectrum Solutions if your shipment does not match this description.

Regional Compliance & Deployment Notes

• U.S. Deployment Only: This product is sold and shipped exclusively within the contiguous 48 United States by Cannafull Spectrum Solutions.
• Plumbing Code Compliance: Installation of fluid-circuit fittings in licensed commercial facilities may be subject to local plumbing codes, facility build-out permits, or state-level mechanical inspection requirements. The operator is responsible for confirming that the installation method and materials comply with applicable local and state regulations.
• Nutrient Solution Contact: If this fitting will be used in a recirculating reservoir or top-feed circuit carrying nutrient solution, confirm that the fitting material is compatible with the nutrient formulation and pH range in use. Consult V-SYSTEM documentation for material specifications.
• Licensed Facility Use: This product is intended for use in licensed cultivation and production facilities operating under applicable state and local regulatory frameworks. Cannafull Spectrum Solutions does not represent or warrant that use of this product satisfies any specific regulatory requirement in any jurisdiction.
• No Canadian Distribution: This product is not available for shipment to Canadian provinces or territories. No CSA certification or Health Canada compliance representation is made for this SKU.

Compliance determinations are the sole responsibility of the purchasing operator. Cannafull Spectrum Solutions provides product information based on available manufacturer source data and does not provide regulatory, legal, or engineering compliance advice. Consult qualified professionals for facility-specific compliance questions.