Tee de flujo doble roscado de 5" de Alien Hydroponics

Precision Control in Any Space

Every irrigation circuit has a failure point — and in compact V-SYSTEM builds, that failure point is almost always the return line junction. When the fitting connecting your V-pots to the 5" return line lacks the geometry to manage dual-directional flow, the result is not a dramatic failure you can diagnose immediately. It is a slow, invisible bleed of consistency: one side of the tee starves while the other floods, nutrient solution backs up or drains unevenly, and the operator spends run after run chasing a root-zone problem that is actually a plumbing problem. Guesswork fills the gap where engineered flow management should be, and every adjustment made without the right hardware compounds the variance rather than correcting it.

After deployment, the irrigation circuit behaves as a single controlled system rather than a collection of individually managed nodes. V-pots drain symmetrically into the return line, feed cycles complete without pooling or pressure differential at the junction, and the operator's attention shifts from troubleshooting plumbing to managing the crop. The return line runs clean. The reservoir receives consistent return volume on every cycle. Operational confidence in the feed schedule becomes the baseline, not the exception.

The mechanism behind that outcome is the patent-pending Dual-Flow™ geometry built into the BD101-0040. Unlike a standard tee fitting that treats both inlet paths as hydraulically equivalent regardless of actual flow conditions, the Dual-Flow™ design is engineered specifically to manage the directional flow characteristics of V-pots connecting into a 5" return line — the exact dimensional and hydraulic interface the V-SYSTEM platform requires. This is not a universal fitting adapted to the application; it is a fitting designed from the ground up for this specific junction. In practical terms, the Tee Threaded 5" Dual-Flow delivers balanced dual-path return flow at the V-pot-to-5"-return-line interface within any V-SYSTEM irrigation circuit.

Where This Belongs (and Doesn't)

This fitting is engineered exclusively for V-SYSTEM hydroponic configurations. Installation outside of a V-SYSTEM platform — including non-compatible reservoir assemblies, mismatched return line diameters, or irrigation systems not designed around V-pot geometry — is outside the scope of this component's design intent. Confirm V-SYSTEM compatibility before installation.

How It Works

The Tee Threaded 5" Dual-Flow operates at the hydraulic junction between individual V-pots and the shared 5" return line — the single most consequential connection point in a V-SYSTEM irrigation circuit. At this junction, two flow paths must merge into one return channel without creating backpressure, pooling, or asymmetric drainage between the connected pots. A standard tee fitting cannot reliably manage this because its internal geometry does not account for the directional bias introduced when two active drain paths converge at unequal flow rates or pressures.

The patent-pending Dual-Flow™ design addresses this directly. The fitting's internal channel geometry is engineered to accept simultaneous flow from both V-pot connections and redirect that combined volume into the 5" return line without creating a hydraulic conflict between the two inlet paths. The threaded connection interface ensures a secure, leak-resistant seal at each junction point, eliminating the micro-leaks and joint failures that occur with friction-fit or improvised connectors under repeated wet-dry cycling. Because the fitting is purpose-built for the V-SYSTEM's specific dimensional standards, it integrates without modification, shimming, or adapter hardware.

The result at the system level is a return circuit that behaves predictably across every feed cycle: consistent drainage timing, uniform return volume to the reservoir, and a plumbing junction that does not require operator intervention between cycles. In practical terms, the Tee Threaded 5" Dual-Flow delivers controlled dual-path drainage from V-pots into the 5" return line through a patent-pending threaded fitting engineered to V-SYSTEM dimensional specifications.

Commercial Assurance

• Patent-Pending Design: The Dual-Flow™ fitting geometry is patent-pending, reflecting purpose-engineered development rather than commodity component sourcing.
• Factory-Authorized Supply Chain: Cannafull Spectrum Solutions is a factory-authorized dealer for Alien Hydroponics, ensuring component authenticity and supply chain integrity for every BD101-0040 unit.
• V-SYSTEM Platform Alignment: Designed and dimensioned specifically for V-SYSTEM integration — no field modification required for compliant installation.
• Warranty: Warranty terms are not specified in current manufacturer documentation. Contact Cannafull Spectrum Solutions at cannafullspec.com for confirmed warranty coverage before ordering.
• Local Availability: Available for pickup in Longmont, Colorado, in addition to standard shipping fulfillment.

System Integration

• Platform Requirement: Requires an existing V-SYSTEM configuration; the BD101-0040 is a V-SYSTEM-native component and is not designed for cross-platform use.
• Return Line Interface: Connects directly to the 5" return line — confirm return line diameter matches before ordering.
• Top-Feed Compatibility: Integrates into both recirculating top-feed and drain-to-waste V-SYSTEM circuits without modification.
• Reservoir Impact: Consistent dual-flow drainage reduces return-volume variance at the reservoir, supporting more predictable nutrient replenishment scheduling.
• Replacement Protocol: Functions as a direct replacement for worn, cracked, or hydraulically compromised tee fittings within an existing V-SYSTEM build.

Facility Integration Data

For operators scaling V-SYSTEM infrastructure across multiple benches or rooms, the per-unit cost of the BD101-0040 at $41.20 makes fleet-level budgeting straightforward — the table below reflects acquisition cost at three common deployment scales.

Financing estimates are illustrative. Actual Sezzle and Affirm terms are subject to approval and may vary. Contact cannafullspec.com for volume pricing inquiries.

Operator Field Note

• Confirm Return Line Diameter First: The BD101-0040 is dimensioned for the 5" V-SYSTEM return line. Verify your return line specification before installation — installing into a non-matching diameter will compromise the seal and flow performance.
• Threaded Interface Requires Clean Threads: Inspect the mating threads on your V-SYSTEM return line and V-pot connections before installation. Debris or damage on the mating surface will prevent a proper seal regardless of fitting quality.
• Patent-Pending Status: The Dual-Flow™ geometry is patent-pending. Do not attempt to replicate or substitute with generic tee fittings — the internal channel geometry is not reproduced in standard plumbing components.
• Drain-to-Waste vs. Recirculating: The BD101-0040 performs in both drain-to-waste and recirculating top-feed V-SYSTEM configurations. No modification is required between applications, but verify your system's flow rate and cycle timing are within V-SYSTEM design parameters.
• Replacement Indicator: If your current tee fitting shows visible cracking, thread wear, or inconsistent drainage timing between connected V-pots, the BD101-0040 is the manufacturer-specified replacement component.
• Local Pickup Available: Operators in the Longmont, Colorado area can arrange in-person pickup — contact Cannafull Spectrum Solutions to confirm availability and scheduling.

Operator FAQ

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this territory cannot be fulfilled through standard shipping channels.
• Local Pickup: Available in Longmont, Colorado. Contact cannafullspec.com to confirm availability and schedule pickup prior to arrival.
• Returns: Return eligibility is subject to Cannafull Spectrum Solutions return policy terms. Contact cannafullspec.com before initiating any return.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about your order? Contact Cannafull Spectrum Solutions at cannafullspec.com.

What's in the Box

• 1x Alien Hydroponics Tee Threaded 5" Dual-Flow Fitting (BD101-0040)

Note: Box contents are confirmed based on available manufacturer documentation. V-SYSTEM components, reservoir hardware, tubing, and installation accessories are not included unless explicitly listed above. Confirm complete system requirements with Cannafull Spectrum Solutions before ordering if building a new V-SYSTEM configuration.

Regional Compliance & Deployment Notes

• Shipping Jurisdiction: Available for shipment within the contiguous 48 United States only. No international or Canadian fulfillment is available through Cannafull Spectrum Solutions.
• Local Pickup Jurisdiction: In-person pickup is available at the Longmont, Colorado location. Buyers outside Colorado may arrange shipping through standard fulfillment.
• Installation Compliance: Installation of irrigation components within licensed cultivation facilities must comply with applicable state and local regulations governing water systems, plumbing, and facility infrastructure. Confirm compliance requirements with your facility's licensed contractor or compliance officer before installation.
• Patent Notice: The Dual-Flow™ fitting design is patent-pending. Unauthorized reproduction or reverse engineering of the fitting geometry may constitute patent infringement. Use only manufacturer-supplied components within V-SYSTEM builds.
• Operator Responsibility: The BD101-0040 is a system-specific component. The operator is responsible for confirming V-SYSTEM compatibility, return line diameter, and installation conditions prior to deployment. Cannafull Spectrum Solutions and Alien Hydroponics assume no liability for installations performed outside of V-SYSTEM design specifications.

Product specifications, warranty terms, and availability are subject to change without notice. All claims are based on manufacturer-supplied documentation current at time of publication. Cannafull Spectrum Solutions is a factory-authorized dealer for Alien Hydroponics products sold within the contiguous United States. Confirm current specifications and warranty coverage at cannafullspec.com before ordering.