Tubo hidropónico Alien de 40 mm, plateado, espiral de 1 metro

Quick Spec: Pipe Diameter: 40mm  |  Color: Silver  |  Length: 1 Meter  |  Configuration: Spiral  |  SKU: BD101-3005  |  Price: $37.99  |  4 payments of $9.50 with Sezzle

Precision Control in Any Space

The enemy is guesswork — and in a nutrient delivery system, guesswork has a measurable cost. When irrigation components are mismatched, undersized, or assembled from generic stock, the result is pressure inconsistency that cascades through every feed cycle: some sites receive excess solution while others are starved, root zones develop unevenly, and the operator spends time chasing symptoms rather than managing outcomes. Every feed event becomes a variable, and variables compound. The silent cost is not a single failed crop — it is the accumulated yield drag of a system that was never engineered to hold tolerance.

After deploying purpose-built irrigation infrastructure, the operational picture changes. Feed cycles run on schedule without manual correction. Nutrient solution moves from reservoir to root zone through components that were designed to work together, holding consistent flow rate and pressure across every site in the layout. The operator's attention shifts from troubleshooting to optimization — because the system is no longer the source of variance. Irrigation becomes a background process, not a daily intervention.

The ALIEN Hydroponics Pipe 40mm Silver 1 Meter Spiral is the physical mechanism that makes that consistency possible at the distribution level. The 40mm diameter is a deliberate engineering choice for hydroponic irrigation routing — large enough to sustain adequate flow volume without pressure drop across the spiral configuration, and sized to interface with ALIEN Hydroponics system components without adapter losses. The silver finish is not cosmetic; it is a functional specification that supports light reflection and thermal management within the grow environment. The spiral configuration provides structured flexibility, allowing the pipe to be routed through constrained enclosures, around canopy infrastructure, and into modular top-feed or drain-to-waste assemblies without kinking or flow restriction. In practical terms, the ALIEN Hydroponics Pipe 40mm Silver 1 Meter Spiral delivers a 1-meter spiral-configured irrigation run at 40mm nominal diameter, purpose-built for integration into ALIEN Hydroponics recirculating and drain-to-waste systems.

Where This Belongs (and Doesn't)

This product is a passive irrigation infrastructure component. It does not require electrical connection, circuit planning, or HVAC integration. Installation should follow the irrigation system manufacturer's assembly guidelines. Verify compatibility with your specific ALIEN Hydroponics system configuration before ordering.

How It Works

The ALIEN Hydroponics Pipe 40mm Silver 1 Meter Spiral functions as a structured distribution conduit within a hydroponic irrigation circuit. The 40mm nominal diameter establishes the internal flow cross-section that governs volumetric flow rate and velocity through the pipe segment. In a properly designed irrigation system, pipe diameter is selected to match pump output and system head pressure — undersized pipe creates velocity-driven pressure drop and turbulence; oversized pipe reduces velocity to the point where particulate matter in nutrient solution can settle and accumulate. The 40mm specification is positioned within the ALIEN Hydroponics system architecture to maintain laminar, consistent flow under normal operating conditions.

The spiral configuration is the defining mechanical characteristic of this component. Rather than a straight run, the pipe is formed into a spiral geometry that serves two operational functions: it introduces a controlled degree of flexibility for routing through constrained spaces without requiring additional elbow fittings that would otherwise introduce pressure loss points, and it provides a degree of thermal buffering as nutrient solution transits the pipe — relevant in environments where reservoir temperature management is part of the operational protocol. The silver color specification contributes to light reflectivity within the grow enclosure, reducing heat absorption by the pipe surface under high-intensity lighting.

At the system integration level, this pipe segment connects reservoir output to distribution manifolds, top-feed drip emitters, or recirculating return lines depending on the specific ALIEN Hydroponics configuration in use. The 1-meter length provides a standardized run that can be deployed as a single segment or combined with additional pipe lengths and fittings to reach required distribution points. Material composition is not specified in available source data — operators with specific chemical compatibility requirements for nutrient solution formulations should confirm material specification directly with ALIEN Hydroponics prior to deployment. In practical terms, the ALIEN Hydroponics Pipe 40mm Silver 1 Meter Spiral delivers a 1-meter, 40mm-diameter spiral irrigation segment designed for direct integration into ALIEN Hydroponics top-feed and drain-to-waste system configurations.

Commercial Assurance

System Integration

• Reservoir Compatibility: Designed for integration with ALIEN Hydroponics reservoir systems; verify outlet diameter and fitting compatibility before assembly.
• Top-Feed and Drain-to-Waste: Suitable for use in both recirculating top-feed and single-pass drain-to-waste irrigation configurations within the ALIEN Hydroponics product ecosystem.
• Fitting Interface: The 40mm diameter specification is intended to mate with ALIEN Hydroponics fittings and manifold components; confirm fitting SKUs with your system layout before ordering additional pipe lengths.
• Pump Sizing: Ensure reservoir pump output and head pressure are matched to 40mm pipe flow characteristics; consult ALIEN Hydroponics system documentation for recommended pump specifications.
• Modular Expansion: Multiple 1-meter segments can be combined to extend irrigation runs; plan total pipe length requirements against your grow room layout before ordering.

Facility Integration Data

The following table provides fleet-scale procurement reference data for operators standardizing on ALIEN Hydroponics 40mm Silver Spiral pipe across single-room, multi-room, and facility-wide irrigation infrastructure builds.

Operator Field Notes

• Measure before ordering: Map your full irrigation run from reservoir outlet to final distribution point before determining how many 1-meter segments are required; account for vertical drops, horizontal runs, and any routing around structural elements.
• Fitting inventory: Order compatible ALIEN Hydroponics fittings, couplers, and end caps at the same time as pipe to avoid delays in system assembly; the 40mm specification requires matched fittings — generic plumbing fittings may not seal correctly.
• Spiral orientation: When routing the spiral pipe through tight spaces, maintain the natural spiral geometry rather than forcing the pipe into a straight run — the spiral is a structural feature, not a packaging format.
• Nutrient solution compatibility: Material composition is not confirmed in available source data; if your nutrient program includes aggressive chelating agents or pH-extreme formulations, verify pipe material compatibility with ALIEN Hydroponics before extended deployment.
• Inspection interval: Include pipe segments in your routine irrigation system inspection protocol; check for discoloration, surface degradation, or fitting joint weeping at each scheduled maintenance interval.
• Spare inventory: Maintain at least one spare pipe segment per active irrigation circuit; a failed or kinked segment mid-cycle can interrupt feed delivery to an entire zone.

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders cannot be fulfilled to Alaska, Hawaii, U.S. territories, or international destinations.
• Fulfillment: Orders are processed and shipped from authorized distribution. Estimated transit times will be provided at checkout based on destination. Cannafull Spectrum Solutions is not responsible for carrier delays outside our control.
• Returns: Returns are accepted subject to the Cannafull Spectrum Solutions Return Policy. Items must be in original, uninstalled condition. Contact support before initiating a return to receive a Return Merchandise Authorization (RMA) number.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions before you order? Contact Cannafull Spectrum Solutions at cannafullspec.com or through the store contact page. Our team can confirm compatibility, availability, and fleet pricing for volume orders.

What's in the Box

• 1x ALIEN Hydroponics Pipe 40mm Silver 1 Meter Spiral (SKU: BD101-3005)

Box contents are based on available manufacturer source data. Fittings, couplers, end caps, and other irrigation system components are not included unless explicitly listed above. Verify complete system component requirements against your ALIEN Hydroponics system documentation before ordering. Cannafull Spectrum Solutions is not responsible for components not listed in the confirmed box contents above.

Regional Compliance & Deployment Notes

• Jurisdiction: This product is available for sale and shipment within the contiguous 48 United States only. Cannafull Spectrum Solutions does not ship to Canadian provinces or international destinations.
• Facility Compliance: Operators are responsible for ensuring that irrigation system components, including this pipe, comply with applicable state and local regulations governing controlled-environment agriculture and licensed cultivation facilities in their jurisdiction.
• Material Certification: Material composition and any applicable certifications (NSF, food-grade, etc.) are not confirmed in available source data. Operators in jurisdictions requiring certified irrigation components should verify compliance documentation directly with ALIEN Hydroponics before deployment.
• Installation Standards: Installation of irrigation infrastructure should follow the system manufacturer's guidelines and any applicable state or local building and plumbing codes. This product is a passive irrigation component and does not require licensed electrical or mechanical contractor installation under standard conditions — verify local requirements with your facility compliance officer.
• Authorized Distribution: Cannafull Spectrum Solutions is a factory-authorized dealer for ALIEN Hydroponics products distributed across licensed U.S. facilities. Purchasing through unauthorized channels may void manufacturer support and warranty eligibility.

Compliance requirements vary by state and municipality. The information provided in this section is for general reference only and does not constitute legal or regulatory advice. Operators are solely responsible for verifying that all equipment and installation practices meet the requirements of their specific licensed facility jurisdiction. Cannafull Spectrum Solutions makes no representations regarding the regulatory status of this product in any specific jurisdiction.