Maceta de 20 l plateada Alien Hydroponics (con orificios para flotador y enfriador)

Quick Spec: V-SYSTEM Header Pot | 20L Capacity | 40mm Connection | Silver | Chiller & Float Holes Included | SKU: BD101-0022

Precision Control in Any Space

The enemy is guesswork — and in a hydroponic irrigation circuit, guesswork compounds silently. When a reservoir lacks dedicated integration points for temperature management and float-controlled fill, the operator is left manually monitoring solution levels, improvising chiller connections, and absorbing the downstream consequences: pH drift, temperature excursions, and feed windows that slip outside target range before the problem is visible. Every hour the nutrient solution sits outside spec is an hour the root zone is operating under stress, and that stress does not announce itself until it shows up in the canopy.

After integrating a purpose-built header reservoir into the irrigation circuit, the operational picture changes. Solution temperature is managed at the source through a direct chiller connection, not retrofitted around it. Float valve integration means fill events are governed by the system, not by manual intervention. The nutrient solution entering the feed lines is consistent in temperature, volume, and timing — and the operator's attention shifts from reactive monitoring to scheduled verification.

The mechanism behind that outcome is straightforward: the V-SYSTEM Header Pot is a 20-liter reservoir component built with a 40mm connection port and pre-drilled chiller and float holes, eliminating the field modifications that introduce leak points and misalignment in improvised setups. The 40mm connection interfaces directly with standard V-SYSTEM irrigation plumbing, and the silver finish provides UV-resistant surface integrity for long-term solution containment. In practical terms, the V-SYSTEM Header Pot delivers a 20-liter managed nutrient reservoir with 40mm system connectivity and factory-integrated chiller and float valve ports, ready for direct installation into a top-feed or drain-to-waste circuit.

Where This Belongs (and Doesn't)

Installation note: Plumbing connections to chiller units and float valve assemblies should be completed by a qualified irrigation technician. Verify system pressure ratings and connection compatibility before commissioning. This component is a reservoir vessel — it does not include a pump, chiller, or float valve assembly unless explicitly listed in the bundle.

How It Works

The V-SYSTEM Header Pot functions as the central nutrient solution node in a top-feed or drain-to-waste irrigation circuit. Nutrient solution is held in the 20-liter vessel and distributed downstream through the 40mm connection port, which interfaces with V-SYSTEM plumbing components without requiring field modification. The header position in the circuit means this reservoir is the first point of contact for temperature and volume management — making the quality of its integration points directly consequential to the consistency of every feed event downstream.

The chiller hole provides a factory-prepared penetration point for connecting an inline or submersible chiller unit, allowing solution temperature to be actively managed at the reservoir rather than passively accepted. The float hole accommodates a float valve assembly for automated top-off, maintaining solution volume within a defined operating range between manual fill cycles. Both penetrations are factory-formed, eliminating the structural compromise and leak risk associated with field-drilled reservoir modifications. The silver finish is selected for its UV-resistant properties, protecting solution integrity in environments with ambient light exposure.

The 40mm connection size is a V-SYSTEM standard, ensuring compatibility with the broader component ecosystem without requiring reducers or adapters at the primary outlet. The 20-liter capacity is sized for compact and mid-scale circuits where a smaller header volume supports faster solution turnover and tighter temperature control response. In practical terms, the V-SYSTEM Header Pot delivers a factory-configured 20-liter reservoir with a 40mm primary connection, pre-formed chiller and float ports, and UV-resistant silver construction for direct integration into V-SYSTEM irrigation circuits.

System Integration

• Primary Connection: 40mm outlet port integrates directly with V-SYSTEM irrigation plumbing — confirm fitting compatibility before installation.
• Chiller Integration: Factory-formed chiller hole accepts inline or submersible chiller connections for active solution temperature management at the reservoir.
• Float Valve Compatibility: Pre-formed float hole accommodates standard float valve assemblies for automated volume maintenance between fill cycles.
• Circuit Position: Designed for header placement in top-feed or drain-to-waste configurations — position upstream of distribution manifolds and feed lines.
• Material Compatibility: Silver UV-resistant finish suitable for environments with ambient light exposure; verify chemical compatibility with nutrient solution formulations before extended use.

Facility Integration Data

The following table models procurement cost across common fleet configurations for operators integrating the V-SYSTEM Header Pot into multi-site or multi-circuit irrigation systems.

Operator Field Notes

• Verify connection sizing before ordering: The 40mm outlet is a V-SYSTEM standard — confirm your existing plumbing accepts 40mm fittings or source the appropriate adapter before installation.
• Chiller and float valve are not included: The chiller hole and float hole are pre-formed penetration points only. Chiller units and float valve assemblies are sourced separately and must be compatible with the hole dimensions.
• Header placement matters: Position this reservoir upstream of all distribution points. Placing it mid-circuit or downstream of a pump reduces its effectiveness as a temperature and volume management node.
• Inspect all penetration points before filling: Confirm chiller and float fittings are seated and sealed before introducing nutrient solution. Factory-formed holes reduce leak risk but do not eliminate the need for proper fitting installation.
• Silver finish is UV-resistant, not UV-proof: Prolonged direct high-intensity light exposure may degrade surface integrity over time. Position the reservoir to minimize unnecessary direct light contact where practical.
• Dimensions and weight not confirmed in source data: Contact Cannafull Spectrum Solutions or the manufacturer directly to confirm physical dimensions before specifying this component in a space-constrained installation.

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this territory cannot be fulfilled.
• Fulfillment: Standard processing and carrier transit times apply. Contact Cannafull Spectrum Solutions for current lead times on this SKU prior to placing time-sensitive orders.
• Returns: Returns are accepted subject to the conditions outlined in the Cannafull Spectrum Solutions Return Policy. Product must be uninstalled, unmodified, and in original condition to qualify. Review full terms at cannafullspec.com/pages/return-policy before ordering.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about shipping, lead times, or order status? Contact Cannafull Spectrum Solutions at cannafullspec.com.

What's in the Box

• 1 × V-SYSTEM Header Pot 20L Silver (SKU: BD101-0022)
• Pre-formed chiller hole (fitting not included)
• Pre-formed float hole (float valve assembly not included)

Note: Box contents are confirmed based on available product data. Chiller units, float valve assemblies, pumps, and plumbing fittings are not included unless explicitly listed in a bundle SKU. Verify complete system component requirements before ordering. If you require confirmation of exact box contents prior to purchase, contact Cannafull Spectrum Solutions.

Regional Compliance & Deployment Notes

• Jurisdiction: This product is sold and shipped within the contiguous 48 United States only. No shipments to Canadian provinces or territories.
• Facility Compliance: The V-SYSTEM Header Pot is a passive reservoir component. Operators are responsible for ensuring that the complete irrigation system — including pumps, chillers, float valves, and plumbing — complies with applicable local, state, and facility-level codes and regulations.
• Water and Nutrient Handling: Operators in licensed cultivation facilities should verify that nutrient solution handling, containment, and drainage practices comply with applicable environmental and facility regulations in their jurisdiction.
• No Certification Data Available: No third-party certification data (NSF, UL, or equivalent) is specified in available source data for this component. If certification documentation is required for facility compliance, contact the manufacturer directly.

Product specifications, pricing, and availability are subject to change without notice. All technical data presented on this page is sourced from manufacturer-provided documentation current at time of publication. Cannafull Spectrum Solutions makes no representations regarding fitness for a specific application beyond the manufacturer's stated design intent. Confirm all specifications with the manufacturer prior to final system design and procurement. This page is intended for informational purposes for licensed commercial operators within the contiguous United States.