Colector de filtros hidropónicos Alien, completo, 50 mm, aplicación comercial

Precision Control in Any Space

Every irrigation circuit carries a hidden tax when filtration is an afterthought. Particulate matter migrates through feed lines, emitters clog without warning, and the operator spends hours diagnosing flow inconsistencies that should never have existed. In a limited-footprint production environment, that diagnostic time is not recoverable — it compounds across every reservoir cycle, every top-feed event, every drain-to-waste flush. The enemy is not a single failure; it is the accumulated drag of equipment that was never designed to work together, forcing the operator to compensate manually for gaps that a properly specified manifold would have closed at installation.

After a correctly integrated filtration manifold is in-line, the irrigation circuit behaves as a managed system rather than a collection of components. Feed rates stabilize across zones. Emitter performance becomes predictable. Reservoir turnover follows schedule rather than reacting to blockage events. The operator's attention shifts from reactive maintenance to proactive monitoring — a structural change in how the facility operates that compounds positively over every subsequent crop cycle.

The Filter Manifold Complete 50mm-1.5" achieves this by providing a purpose-built, complete filtration assembly sized to the 50mm connection standard of the V-SYSTEM platform. The 1.5" port sizing is preserved as the variant identifier per manufacturer specification, ensuring direct interface with V-SYSTEM plumbing without adapter stacks or field-modified fittings. The complete assembly designation means the manifold ships as a ready-to-install unit — no sourcing of secondary components, no field fabrication. In practical terms, the Filter Manifold Complete 50mm-1.5" delivers a fully integrated inline filtration point at the V-SYSTEM connection standard, eliminating the assembly variables that introduce flow inconsistency at the source.

Where This Belongs (and Doesn't)

This component is a hydraulic filtration assembly for hydroponic irrigation circuits. It is not an electrical component and requires no licensed electrical installation. All plumbing connections should be made by personnel familiar with pressurized irrigation systems. Verify system operating pressure against manifold specifications prior to installation.

How It Works

The Filter Manifold Complete 50mm-1.5" functions as a dedicated inline filtration node within the V-SYSTEM irrigation architecture. At its core, the manifold intercepts the feed stream at the 50mm connection point — the standardized interface of the V-SYSTEM platform — and passes the flow through a filtration element before it reaches downstream emitters, drip lines, or distribution headers. The "Complete" designation is operationally significant: the assembly includes all components required for installation as a single unit, removing the procurement and compatibility risk associated with assembling filtration from discrete parts.

The 50mm body size and 1.5" port specification are not interchangeable descriptors — they define two distinct dimensional references within the same assembly. The 50mm dimension references the manifold body or filter housing diameter, while the 1.5" designation identifies the inlet/outlet connection size that interfaces directly with V-SYSTEM plumbing. This dual-specification design ensures the manifold seats correctly within the V-SYSTEM flow path without requiring transition fittings that would introduce additional pressure drop or potential leak points.

From an operational standpoint, the manifold's role is to protect the precision components downstream — emitters, drip stakes, and distribution manifolds — from particulate contamination that accumulates in reservoir water over time. By centralizing filtration at a single, accessible inline point, the operator can service the filter element without disassembling the broader irrigation circuit. This architecture reduces the labor cost of routine maintenance and ensures that filtration integrity can be verified and restored on a scheduled basis rather than in response to a flow failure event. In practical terms, the Filter Manifold Complete 50mm-1.5" delivers centralized, serviceable inline filtration at the V-SYSTEM 50mm connection standard, protecting downstream irrigation components across the full feed circuit.

Commercial Assurance

• Factory-Authorized Distribution: Cannafull Spectrum Solutions is an authorized dealer for Alien Hydroponics products. SKU BD101-0021 is sourced through verified supply channels.
• V-SYSTEM Compatibility Confirmed: The Filter Manifold Complete 50mm-1.5" is manufacturer-confirmed compatible with the V-SYSTEM platform.
• Warranty: Warranty terms are not specified in available source data for this SKU. Contact Cannafull Spectrum Solutions at cannafullspec.com prior to purchase to confirm current manufacturer warranty coverage for BD101-0021.
• Local Pickup Available: This unit is available for pickup at the Cannafull Spectrum Solutions facility in Longmont, CO — no shipping lead time for local operators.
• Financing Available: Sezzle (5 payments of $64.24) and Affirm ($80.30 every 2 weeks for 8 weeks) financing options are available at checkout for qualified buyers.

System Integration

• V-SYSTEM Platform: Direct interface with V-SYSTEM plumbing at the 50mm connection point — no adapter fittings required when integrating into a standard V-SYSTEM installation.
• Irrigation Circuit Position: Install inline on the main feed line between the reservoir outlet and the primary distribution header to maximize downstream emitter protection across the full top-feed or drain-to-waste circuit.
• Maintenance Access: The complete assembly design supports in-line filter servicing without full circuit disassembly — schedule filter element inspection and replacement as part of standard reservoir maintenance intervals.
• Pressure Compatibility: Verify operating pressure of the existing irrigation circuit against manifold specifications before installation. Contact Cannafull Spectrum Solutions for specification confirmation if source data is required for system design documentation.
• Scalability: Multiple manifold units can be deployed at branch points within larger V-SYSTEM installations to provide zone-level filtration in multi-room or multi-tier production configurations.

Facility Integration Data

The following ROI framework quantifies the operational value of deploying the Filter Manifold Complete 50mm-1.5" across multi-unit V-SYSTEM installations, based on reduced maintenance labor and emitter replacement costs attributable to unmanaged particulate exposure in unfiltered circuits.

Operator Field Notes

• Install at the First Opportunity Downstream of the Reservoir: Positioning the manifold as close to the reservoir outlet as the circuit allows maximizes the length of protected feed line and reduces particulate accumulation across the full distribution network.
• Establish a Filter Service Interval Before First Use: Set a documented inspection schedule tied to reservoir change cycles rather than waiting for flow symptoms. Reactive filter servicing means the emitters have already been exposed to unfiltered water.
• Confirm Connection Compatibility Before Installation: The 50mm-1.5" specification defines both the manifold body and port dimensions. Verify both measurements against your existing V-SYSTEM plumbing before committing to final installation position.
• Do Not Over-Tighten Port Connections: Hydroponic manifold fittings are designed for hand-tight plus a controlled quarter-turn. Excessive torque on the 1.5" port connections can deform sealing surfaces and introduce the leak points the manifold is designed to eliminate.
• Document Pre- and Post-Installation Flow Rates: Baseline flow measurement before installation and a follow-up measurement after the first filter service interval provides quantifiable evidence of the manifold's impact on circuit performance — useful for maintenance records and future procurement justification.
• Local Pickup Reduces Lead Time: For operators in the Colorado Front Range, this unit is available for same-day pickup in Longmont — contact Cannafull Spectrum Solutions to confirm availability before making the trip.

Operator FAQ

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this territory cannot be fulfilled through this channel.
• Local Pickup: Available in Longmont, CO. Contact Cannafull Spectrum Solutions through cannafullspec.com to confirm stock and schedule pickup prior to arrival.
• Returns: Returns are subject to the Cannafull Spectrum Solutions Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about shipping, lead times, or local pickup? Contact Cannafull Spectrum Solutions at cannafullspec.com.

What's in the Box

• 1x Filter Manifold Complete 50mm-1.5" assembly (SKU: BD101-0021)

Note: A detailed component manifest for this assembly is not available in current source data. The "Complete" designation indicates a fully assembled unit; however, Cannafull Spectrum Solutions recommends confirming exact box contents with our team at cannafullspec.com before purchase if a specific component list is required for facility procurement documentation.

Regional Compliance & Deployment Notes

• U.S. Deployment Only: This product is sold and shipped exclusively within the contiguous 48 United States through Cannafull Spectrum Solutions. No international or Canadian distribution is available through this channel.
• Plumbing Code Compliance: Installation of pressurized irrigation components may be subject to local plumbing codes depending on facility classification and jurisdiction. Verify applicable local requirements with your facility's compliance officer or licensed plumber before installation.
• Licensed Facility Use: This component is deployed in licensed commercial production facilities across the United States. Operators are responsible for ensuring that all irrigation system modifications comply with applicable state and local agricultural, commercial, and facility licensing requirements.
• No Electrical Licensing Required: The Filter Manifold Complete 50mm-1.5" is a hydraulic component only. No electrical connections are involved in its installation or operation.
• Specification Verification: Dimensional and weight specifications are not available in current source data for this SKU. Operators requiring precise dimensional data for structural mounting, shipping documentation, or facility compliance filings should contact Cannafull Spectrum Solutions at cannafullspec.com to request manufacturer specification sheets prior to ordering.

Compliance requirements vary by state, county, and facility classification. The information provided here is for general reference only and does not constitute legal or regulatory advice. Cannafull Spectrum Solutions recommends consulting qualified legal and compliance counsel for facility-specific regulatory guidance. Product specifications are subject to change by the manufacturer without notice; confirm current specifications with Cannafull Spectrum Solutions before finalizing procurement decisions.