Colector de filtro completo Alien Hydroponics

Quick Spec: Connection Size: 50mm-1.5"  |  V-SYSTEM Compatible  |  SKU: BD101-0020  |  Price: $321.20

Precision Control in Any Space

Every irrigation system has a failure point that doesn't announce itself — it accumulates. Particulate matter migrates from the reservoir into feed lines. Pressure differentials develop silently across a manifold that was never engineered as a single unit. Fittings sourced from three different suppliers create micro-restrictions that compound over a grow cycle. The result is not a catastrophic failure you can diagnose on day one; it is a slow, invisible divergence between what your nutrient program specifies and what your root zone actually receives. By the time the variance shows up in canopy uniformity or harvest weight, the cause is buried in a system you assembled rather than engineered.

After deployment, the irrigation circuit operates as a single, coherent architecture. Every feed site draws from a common filtration node that intercepts particulate before it reaches emitters. Pressure is distributed through a manifold designed to hold dimensional tolerances across the full connection array. Operators service one point instead of chasing individual inline filters scattered across the grow floor. The feed program you dialed into your reservoir is the feed program your plants receive — without the attrition that piecemeal plumbing introduces between the tank and the root zone.

The Filter Manifold Complete is engineered around a 50mm-1.5" connection standard, providing a direct, specification-matched interface to the Alien Hydroponics V-SYSTEM platform. The complete assembly consolidates filtration and distribution into a single serviceable unit, eliminating the fitting count and joint variance that accumulate when operators build equivalent functionality from discrete components. Compatibility with the V-SYSTEM architecture means the manifold integrates without adapter stacks or pressure-reducing transitions that would otherwise compromise flow integrity at the point of entry. In practical terms, the Filter Manifold Complete delivers a consolidated, V-SYSTEM-compatible filtration and distribution node through a 50mm-1.5" connection interface, reducing the number of potential leak and restriction points to a single, addressable assembly.

Where This Belongs (and Doesn't)

Installation of this assembly into pressurized irrigation circuits should be performed by a qualified operator familiar with the V-SYSTEM platform and the hydraulic requirements of the connected reservoir and feed network. Verify system pressure and flow compatibility before installation. This product is a hydraulic component — it does not regulate electrical circuits or HVAC systems.

How It Works

The Filter Manifold Complete functions as the primary interface between the reservoir and the downstream irrigation network. Nutrient solution exits the reservoir through the 50mm-1.5" connection port and passes through the integrated filter element before entering the manifold distribution body. The filter stage intercepts suspended particulate — mineral precipitate, organic matter, and debris introduced during reservoir maintenance — before it can migrate into emitter lines where it would cause partial or full blockages at the feed site level. Because filtration occurs at the manifold rather than at individual emitters, the entire downstream circuit is protected by a single serviceable component.

The manifold body distributes filtered solution across the connected feed lines through a common-pressure architecture. Each outlet draws from the same filtered supply, which means flow rate consistency across the array is governed by the manifold geometry rather than by the cumulative variance of individually installed inline filters at different service intervals. When the filter element requires service, the operator addresses one location rather than auditing every feed line for individual filter condition. The 50mm-1.5" connection standard ensures dimensional compatibility with V-SYSTEM components without requiring transition fittings that would introduce additional joint count and potential leak paths. In practical terms, the Filter Manifold Complete consolidates particulate filtration and multi-outlet distribution into a single 50mm-1.5" assembly that integrates directly with the V-SYSTEM platform, reducing service complexity to a single maintenance point for the entire downstream irrigation circuit.

Commercial Assurance

System Integration

• V-SYSTEM Platform: Designed for direct connection to Alien Hydroponics V-SYSTEM reservoirs using the 50mm-1.5" port standard — no adapter fittings required for native V-SYSTEM installations.
• Reservoir Outlet Interface: Mounts at the reservoir outlet position, establishing the filtration node at the highest-leverage point in the irrigation circuit before solution enters distribution lines.
• Top-Feed and Drain-to-Waste Compatibility: Supports both recirculating and drain-to-waste feed architectures, making it applicable across multiple production configurations within the same facility.
• Single-Point Serviceability: Filter element access is consolidated to one assembly, allowing maintenance to be completed without disturbing downstream emitter lines or reservoir positioning.
• Scalable Deployment: Multiple manifold assemblies can be deployed across independent reservoir zones within a facility, each maintaining the same filtration standard at its respective circuit entry point.

Facility Integration Data

The following table provides a fleet-level cost reference for operators evaluating the Filter Manifold Complete across multi-reservoir deployments. Unit pricing is based on the listed retail price of $321.20 per assembly (SKU: BD101-0020).

Operator Field Note

• Verify connection compatibility before installation: The 50mm-1.5" port is the documented connection standard for this assembly. Confirm your V-SYSTEM reservoir outlet matches this specification before ordering to avoid requiring transition adapters that add joint count.
• Establish a filter service interval at deployment: The value of a consolidated filtration node is only realized if the filter element is serviced on a defined schedule. Set a maintenance interval based on your reservoir volume, nutrient program, and water source particulate load — do not wait for visible flow reduction to trigger service.
• Document baseline flow at commissioning: Record flow rate at each outlet immediately after installation. This baseline allows operators to detect gradual filter loading before it affects feed delivery, rather than diagnosing variance after it appears in the canopy.
• Treat this assembly as a system component, not a consumable: The manifold body is a durable infrastructure component. Budget for filter element replacement as the recurring cost, not the manifold assembly itself.
• Confirm stock at Longmont before placing multi-unit orders: Availability is confirmed at the Longmont location. For deployments requiring multiple units, contact Cannafull Spectrum Solutions to verify quantity on hand and lead time before committing to an installation schedule.

Operator FAQ

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this territory cannot be fulfilled.
• Lead Time: In-stock availability confirmed at Longmont. Contact Cannafull Spectrum Solutions to verify current stock and estimated ship date before placing time-sensitive orders.
• Returns: Returns are subject to the Cannafull Spectrum Solutions Return Policy. Contact the team prior to initiating any return to confirm eligibility and procedure.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about shipping, lead time, or order status: contact Cannafull Spectrum Solutions directly through cannafullspec.com.

What's in the Box

• Filter Manifold Complete assembly (50mm-1.5" connection, V-SYSTEM compatible) — 1 unit

Note: Specific sub-components included in the "Complete" assembly (filter element, manifold body, fittings, hardware) are not individually itemized in available manufacturer source data. The assembly is sold as a complete, ready-to-install unit. Contact Cannafull Spectrum Solutions or Alien Hydroponics directly to obtain a full component manifest if required for procurement, maintenance planning, or regulatory documentation purposes.

Regional Compliance & Deployment Notes

• Jurisdiction: This product is sold and shipped within the contiguous 48 United States only. Cannafull Spectrum Solutions does not ship to Canadian provinces or territories.
• Regulatory Applicability: The Filter Manifold Complete is a hydraulic irrigation component. It does not carry electrical ratings, UL listings, or HVAC certifications. Compliance requirements for installation within a licensed facility are governed by the applicable state and local plumbing, irrigation, and facility codes in your jurisdiction — not by this product's specifications.
• Licensed Facility Use: This assembly is deployed in licensed commercial cultivation facilities across the United States. Operators are responsible for confirming that the irrigation system into which this manifold is installed meets all applicable state licensing and facility standards.
• State-Specific Requirements: Some states impose specific requirements on irrigation system components used in licensed cultivation facilities. Verify applicable requirements with your state regulatory authority or facility compliance officer before installation.
• No Canadian Compliance Language: This product listing contains no CSA certification, Health Canada compliance language, or Canadian provincial regulatory references. All compliance context is specific to licensed U.S. facilities.

Cannafull Spectrum Solutions provides this compliance context as general operational guidance only. It does not constitute legal or regulatory advice. Operators are solely responsible for confirming compliance with all applicable federal, state, and local regulations governing their licensed facility and irrigation infrastructure.