Tijeras de podar de acero inoxidable AC Infinity | Ergonómicas y ligeras | Hojas rectas de 6,6"

Quick Spec: Total Length: 6.61 in. (16.8 cm) | Blade: Stainless Steel, Teflon Non-Stick | Max Angle Opening: 10° | Handle: Gel Silicone | SKU: AC-PSA3 | UPC: 819137021495

Precision Control in Any Space

Every imprecise cut is a compounding liability. When the tool in your hand resists the motion your technique demands — when resin clogs the blade mid-session, when the grip forces your wrist into an unnatural angle, when the spring tension works against you instead of with you — the cost is not just discomfort. It is inconsistent canopy architecture, ragged wound sites that invite pathogen entry, and operator fatigue that degrades cut quality as the session progresses. Guesswork and equipment that fights you do not announce their cost on a single bad day; they erode output quality across every cycle, invisibly, until the cumulative damage becomes undeniable.

After deploying the AC-PSA3, the trimming workflow changes in a measurable way. Cuts land exactly where technique directs them — clean, controlled, and repeatable from the first snip of a session to the last. The blade clears itself of residue rather than accumulating it, so the tool performs at the end of a long run the same way it performs at the start. Operator endurance extends, cut quality holds, and the canopy receives the precise intervention it requires without the collateral damage that imprecise tooling introduces.

The mechanism behind that consistency is deliberate engineering at the blade and handle level. Precision-ground stainless-steel blades maintain a razor-sharp edge through extended use without requiring constant resharpening. A Teflon non-stick coating on the blade surface actively repels plant residue, reducing resin build-up and preventing the jamming that forces mid-session stops. The straight micro-tip geometry provides access to tight canopy zones where larger blades cannot operate without collateral damage. The gel silicone handle is paired with an easy spring-action mechanism that spring-loads the handles back to open position automatically, reducing the cumulative grip force required across hundreds of cuts. A built-in safety lock secures the shear closed during transport and storage, protecting both the operator and the blade geometry. The maximum angle opening of 10 degrees is calibrated for fine trimming work, not bulk cutting — this is a precision instrument, not a general-purpose tool. In practical terms, the AC Infinity Ergonomic Pruning Shear 6.6 delivers precision-ground cutting performance across a 6.61-inch (16.8 cm) tool length with a Teflon-coated stainless-steel blade and ergonomic gel silicone spring-action handle.

Where This Belongs (and Doesn't)

The AC-PSA3 is a manual precision cutting instrument. It requires no electrical connection, no circuit planning, and no HVAC integration. Deployment is immediate upon receipt. This tool is not rated for cutting wire, rigid stems exceeding its blade tolerance, or any non-plant material.

How It Works

The AC-PSA3 is built around a straight micro-tip blade geometry — a design choice that prioritizes access and accuracy over cutting force. The blade tip is narrow enough to enter dense canopy zones, reach lateral branching sites, and execute fine shaping cuts without disturbing adjacent growth. The stainless-steel construction is precision-ground to a razor edge that maintains its sharpness through extended use, eliminating the performance degradation that occurs with lower-grade blade materials over time.

The Teflon non-stick coating applied to the blade surface is a functional layer, not a cosmetic one. Plant resin is adhesive and accumulates rapidly on uncoated blades, increasing friction, reducing cut precision, and eventually causing the blade to jam or drag rather than shear cleanly. The Teflon layer prevents resin adhesion at the surface level, allowing residue to release rather than bond. The result is a blade that maintains consistent cutting performance across a full session without requiring mid-session cleaning stops.

The handle system operates on an easy spring-action mechanism: the gel silicone handles are spring-loaded to return to the open position automatically after each cut, eliminating the need for the operator to manually re-open the shear between snips. This reduces the total grip force exerted per cut cycle and distributes the mechanical load more evenly across the hand, which is particularly significant for operators managing arthritis or carpal tunnel conditions during extended trimming sessions. The built-in safety lock engages to hold the shear in the closed position when not in active use, protecting the blade geometry and preventing accidental contact. In practical terms, the AC Infinity Ergonomic Pruning Shear 6.6 delivers spring-assisted, residue-resistant cutting performance across a 6.61-inch tool profile with a maximum blade opening of 10 degrees and a gel silicone ergonomic handle rated for extended-session use.

System Integration

• Canopy Management Workflow: Pairs directly with AC Infinity grow tents, training systems, and environmental controllers as part of a unified cultivation ecosystem — the AC-PSA3 is the manual precision layer of a broader automated deployment infrastructure.
• Post-Harvest Processing: Suitable for use alongside trimming trays, collection bins, and drying rack systems; the Teflon blade reduces cross-contamination risk between cuts by releasing residue rather than transferring it.
• Operator Ergonomics Stack: Complements gloves, knee pads, and anti-fatigue matting in facilities where extended manual labor cycles are part of the production schedule.
• Tool Storage Integration: The built-in safety lock makes the AC-PSA3 compatible with standard tool pouches, pegboard storage, and drawer organizers without requiring a blade guard accessory.
• Procurement Scalability: At a MAP of $7.99 per unit, the AC-PSA3 supports multi-operator procurement at minimal per-unit cost, allowing facilities to equip full trimming teams without significant capital outlay.

Facility Integration Data

The following fleet-scale cost model is provided to support procurement planning for multi-operator trimming teams; all figures are based on the MAP price of $7.99 per unit (AC-PSA3).

Operator Field Note

• Clean the blade between cultivars: Even with Teflon coating, wiping the blade with isopropyl alcohol between different plant varieties prevents cross-contamination of terpene profiles and pathogen transfer.
• Engage the safety lock during any non-cutting interval: The built-in lock is not just a transport feature — engaging it during breaks, tray changes, or movement between rows prevents accidental blade contact and preserves edge geometry.
• The 10-degree opening is a precision parameter, not a limitation: Operators accustomed to wider-opening shears should understand that the AC-PSA3 is calibrated for fine trimming work. Attempting to force the blade beyond its designed opening range will compromise the spring mechanism and blade alignment.
• Spring tension is a fatigue management feature: The easy spring-action return is specifically engineered to reduce cumulative grip load. Operators with hand conditions should allow the spring to do its work rather than manually closing the shear against the spring return.
• Store with the lock engaged: Storing the AC-PSA3 in the open position compresses the spring unnecessarily over time. Lock-closed storage preserves spring tension and blade alignment across the tool's service life.
• Inspect the Teflon coating periodically: If the non-stick surface shows visible scoring or wear, blade performance will degrade. At a MAP of $7.99, replacement is the operationally correct response rather than continued use of a compromised blade.

Operator FAQ

Shipping & Logistics

• Shipping Jurisdiction: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, and international destinations including Canada are not fulfilled through this channel.
• Fulfillment: The AC-PSA3 ships from authorized distribution stock. Estimated transit times are provided at checkout based on destination. Cannafull Spectrum Solutions does not guarantee carrier delivery windows.
• Returns: Returns are accepted for defective units in accordance with our Return Policy. Non-defective returns are subject to review. Review full terms at cannafullspec.com/pages/return-policy before ordering.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about your order? Contact Cannafull Spectrum Solutions at support@cannafullspec.com or visit cannafullspec.com/pages/contact.

What's in the Box

• 1x AC Infinity Ergonomic Pruning Shear 6.6 (AC-PSA3) — stainless steel straight micro-tip blades with Teflon non-stick coating, gel silicone handles, easy spring-action mechanism, and built-in safety lock

Note: Box contents are confirmed based on manufacturer source data available at time of listing. No additional accessories, blade guards, or carrying cases are listed in source documentation. If your shipment is missing any components or contains damaged items, contact Cannafull Spectrum Solutions at support@cannafullspec.com before use.

Regional Compliance & Deployment Notes

• The AC-PSA3 is a manual hand tool with no electrical components, no voltage requirements, and no emissions profile. It is not subject to UL, ETL, FCC, or RoHS certification requirements applicable to powered equipment.
• No state-level cultivation equipment registration is required for manual cutting tools in any U.S. jurisdiction known at time of listing. Operators should verify local facility compliance requirements independently.
• The AC-PSA3 is sold and shipped within the contiguous 48 United States only through Cannafull Spectrum Solutions. No cross-border fulfillment is available through this channel.
• Facilities operating under state cannabis cultivation licenses should confirm that all manual tools used in the cultivation environment meet any facility-specific sanitation and contamination-prevention protocols required by their licensing authority.
• UPC 819137021495 is available for procurement documentation, inventory management, and compliance recordkeeping purposes.

Compliance information is provided for reference only and reflects conditions known at time of listing. Cannafull Spectrum Solutions does not provide legal or regulatory compliance advice. Operators are responsible for verifying all applicable local, state, and federal requirements for their specific facility and jurisdiction. Specifications and availability subject to change without notice.