Tijeras de podar curvas de acero inoxidable AC Infinity | Ergonómicas y ligeras | Cuchillas de 6,6"

Quick Spec: Total Length: 6.61 in. (16.8 cm)  |  Blade Material: Stainless Steel  |  Finish: Teflon Non-Stick Coating  |  Design: Curved Micro Tip  |  Mechanism: Easy Spring Action  |  Handle: Gel Silicon  |  Max Angle Opening: 10°  |  UPC: 819137023383

Precision Control in Any Space

Every trimming session carries a hidden cost when the tool itself becomes the obstacle. Blades that drag through resin, handles that resist the hand, and flat-tip geometry that cannot reach between tightly packed branches — these are not minor inconveniences. They are compounding errors. Each imprecise cut leaves plant structure to chance, each jamming event interrupts workflow, and each session of forced grip pressure accumulates into operator fatigue that degrades cut quality long before the work is done. The enemy is not the plant — it is equipment that fights you at every angle.

After deploying the right tool, the trimming station operates differently. Cuts land exactly where they are directed. Operators move through dense canopy without repositioning repeatedly to find an angle that works. Sessions run longer without the grip fatigue that forces breaks and introduces inconsistency. Residue does not accumulate on the blade surface between cuts, so each stroke performs identically to the first. The result is a workflow where the tool disappears and the operator's intent is the only variable in the cut.

The mechanism behind that outcome is a purpose-built geometry and surface engineering stack. The curved micro-tip blade design bows outward to create a reach profile that accesses tight internode spaces without disturbing adjacent growth — a capability that flat-blade instruments structurally cannot replicate. The stainless steel blades are precision-ground to maintain a razor edge through extended use cycles. A Teflon non-stick coating applied to the blade surface actively repels plant resin, preventing the residue accumulation that causes drag and jamming. The easy spring-action mechanism automatically returns the handles to the open position after each cut, eliminating the manual reset motion that compounds fatigue across high-volume sessions. The gel silicon handle material absorbs grip pressure and reduces the force transfer that drives hand fatigue in operators with arthritis or carpal tunnel syndrome. A built-in safety lock secures the blades in the closed position between uses, protecting both the operator and the precision-ground edge. In practical terms, the AC Infinity Ergonomic Pruning Shear 6.6" delivers repeatable precision cuts via a 6.61 in. (16.8 cm) curved micro-tip stainless steel blade with Teflon coating, spring-action return, and gel silicon ergonomic handles at a 10° maximum angle opening.

Where This Belongs (and Doesn't)

This is a precision hand tool for plant trimming and canopy management. It is not a general-purpose cutting instrument and is not rated for wire, cable, or structural materials. Use within the application parameters defined by the manufacturer.

How It Works

Curved Micro-Tip Blade Geometry: The defining engineering decision in the AC-PSC3 is the bowed blade profile. Unlike straight-blade instruments that require a clear linear approach path, the curved micro-tip geometry creates a reach arc that angles into tight internode spaces — between branches, beneath canopy layers, and into growth zones that a flat blade cannot access without disturbing surrounding structure. This is not a cosmetic design choice; it is a functional geometry that expands the operator's effective cutting envelope in dense plant environments.

Precision-Ground Stainless Steel Blades: The blade material is stainless steel, precision-ground to a razor edge. The manufacturing process produces a cutting edge that maintains sharpness through extended use rather than degrading rapidly after initial deployment. The stainless steel composition resists corrosion from plant moisture and cleaning agents, extending the service life of the cutting surface without requiring frequent resharpening cycles.

Teflon Non-Stick Coating: A Teflon non-stick coating is applied to the blade surface to address one of the primary failure modes in plant trimming tools — resin accumulation. Plant resin is adhesive and builds up on uncoated blade surfaces with each cut, progressively increasing drag, reducing cut quality, and eventually causing jamming. The Teflon coating creates a low-adhesion surface that repels resin before it can bond to the blade, maintaining consistent cut performance across the full session without requiring mid-session cleaning stops.

Easy Spring-Action Return Mechanism: After each cut, the spring-action mechanism automatically pushes the handles back to the open position, priming the blades for the next cut without any manual reset action from the operator. This eliminates the repetitive open-grip motion that accumulates into significant hand fatigue over high-volume trimming sessions. The mechanism is calibrated to provide consistent return force without requiring the operator to fight the spring on the closing stroke.

Gel Silicon Ergonomic Handles with Safety Lock: The handle material is gel silicon, selected for its pressure-absorbing properties that reduce the force transmitted to the operator's hand during each cut. This is particularly relevant for operators managing arthritis or carpal tunnel syndrome, where grip pressure is a direct driver of session duration limits. The built-in safety lock secures the shear in the closed position between uses, protecting the precision-ground blade edge from contact damage and preventing accidental opening during transport or storage. In practical terms, the AC Infinity Ergonomic Pruning Shear 6.6" integrates a 6.61 in. (16.8 cm) curved stainless micro-tip blade with Teflon coating, spring-action return, gel silicon handles, and a 10° maximum angle opening into a single 6.61 in. instrument engineered for repeatable precision in constrained cutting environments.

System Integration

• Canopy Management Workflow: Integrates directly into structured trimming and training protocols — the curved micro-tip geometry enables precise access to internode zones without disrupting adjacent growth architecture
• Trimming Station Deployment: The safety lock and compact 6.61 in. form factor make the AC-PSC3 suitable for organized multi-tool trimming stations where blade protection and space efficiency are operational requirements
• Operator Rotation Compatibility: The gel silicon ergonomic handle and spring-action return mechanism reduce per-session fatigue accumulation, supporting longer operator rotation windows without cut quality degradation
• Residue Management Protocol: The Teflon non-stick coating reduces mid-session cleaning frequency, allowing the tool to integrate into high-throughput trimming workflows without scheduled blade-cleaning interruptions
• Multi-Unit Scaling: The AC-PSC3 is available as a single unit or in a 2-pack configuration (Curved Blades 2-Pack), supporting fleet-level deployment across multiple operators or trimming stations without per-unit sourcing overhead

Facility Integration Data

The following ROI reference data is provided to support procurement decisions at multi-unit deployment scale — calculate tool cost against operator session efficiency gains and reduced mid-session maintenance interruptions.

Operator Field Notes

• The curved micro-tip blade profile requires a slightly different approach angle than straight-blade instruments — operators transitioning from flat-blade tools should allow one session to calibrate to the bowed geometry before evaluating cut precision
• The Teflon coating is a surface treatment, not a structural layer — avoid abrasive cleaning tools or solvents that can degrade the coating and reduce its resin-repellent performance over time; wipe with a soft cloth and appropriate cleaning solution
• The safety lock should be engaged whenever the shear is set down between cuts — the precision-ground edge is the primary performance asset of this tool and contact damage from an unsecured blade is the most common cause of premature edge degradation
• The spring-action return force is fixed at the factory setting — do not attempt to modify or adjust the spring mechanism, as this will affect both the return consistency and the closing force balance that the ergonomic design depends on
• For operators managing hand fatigue conditions, the gel silicon handle performs best when the grip is relaxed between cuts rather than maintained in a continuous closed position — the spring-action return is designed to do the opening work so the operator's hand can release fully after each stroke
• In multi-operator environments, individual tool assignment is recommended over shared-pool deployment — blade edge condition and handle wear are operator-specific variables that affect cut quality and should be tracked at the individual unit level

Operator FAQ

Shipping & Logistics

• Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this territory cannot be fulfilled.
• Fulfillment: Orders are processed and shipped from authorized distribution points. Estimated transit times are provided at checkout and vary by destination. Cannafull Spectrum Solutions is not responsible for carrier delays after handoff.
• Returns: Returns are accepted for defective units in accordance with our Return Policy. Non-defective returns are subject to review. Contact support at cannafullspec.com before initiating any return.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about your order? Contact Cannafull Spectrum Solutions at cannafullspec.com

What's in the Box

• 1x AC Infinity Ergonomic Pruning Shear 6.6" — Curved Blades (SKU: AC-PSC3)

Box contents confirmed from manufacturer source data. Accessory items, carrying cases, or additional components are not listed in the source data for this SKU and are not confirmed as included. Do not assume inclusion of any item not listed above. Verify current packaging contents with Cannafull Spectrum Solutions if confirmation is required prior to purchase.

Regional Compliance & Deployment Notes

• United States Deployment: The AC Infinity Ergonomic Pruning Shear 6.6" (AC-PSC3) is sold and shipped exclusively within the contiguous 48 United States through Cannafull Spectrum Solutions.
• Facility Compliance: This is a hand tool with no electrical, chemical, or emissions components. No facility-level regulatory permits are required for tool deployment. Operators are responsible for confirming that trimming and cultivation activities comply with applicable state and local licensing requirements in their jurisdiction.
• Occupational Safety: The built-in safety lock is a blade protection feature, not a substitute for proper tool handling protocols. Operators should follow facility-level PPE and tool safety procedures when deploying cutting instruments in production environments.
• No Canadian Distribution: Cannafull Spectrum Solutions does not ship to Canadian provinces or territories. This listing does not reference CSA certification, Health Canada compliance, or any Canadian regulatory framework.
• Authorized Dealer Channel: Purchasing through Cannafull Spectrum Solutions confirms sourcing through a factory-authorized U.S. dealer channel, maintaining supply chain integrity and manufacturer support eligibility for applicable warranty claims.

Product specifications, pricing, and availability are subject to change without notice. All data presented on this page is sourced from manufacturer documentation available at time of publication. Cannafull Spectrum Solutions makes no representations beyond what is confirmed in manufacturer source data. Verify current specifications with AC Infinity Inc. or Cannafull Spectrum Solutions before making procurement decisions for large-scale facility deployment.