AC Infinity HYDRONE 5 5x5 Commercial Dehumidifier | 10 Drying Levels

Quick Spec: SKU: AC-DHT5  |  Coverage: Up to 5x5  |  Capacity: 4L / 0.5 gal  |  Wattage: 209–350W  |  Voltage: 120V AC / 60 Hz  |  Min. Temp: 41°F (5°C)  |  Drying Levels: 10  |  Ducting: Dual 6" (15 cm) ports

Precision Control in Any Space

Uncontrolled humidity is a silent yield killer. When the equipment managing your atmospheric environment operates at a fixed output — or worse, cycles on and off with no feedback loop — the canopy absorbs the consequences. Moisture accumulates unevenly. Transpiration rates diverge across the footprint. The operator compensates manually, adjusting settings that the unit cannot execute with any real precision. The result is a cultivation environment that drifts, and a crop that reflects every hour of that drift. Guesswork and equipment that fights you are not operational inconveniences — they are compounding losses that accumulate across every run.

After deploying the HYDRONE 5, the environment stops being a variable the operator manages and becomes a parameter the system holds. Humidity targets are set, detected automatically, and maintained without manual correction cycles. The unit responds to atmospheric shifts in real time, keeping the canopy in the target vapor pressure deficit window throughout the entire photoperiod and dark cycle. Ducted dry air reaches the interior of the tent directly. The operator's attention moves from reactive correction to proactive scheduling — and the consistency of each run becomes a function of the system, not the shift.

The mechanism behind that consistency is a proprietary PWM-controlled rotary motor — a fundamentally different architecture from compressor-based dehumidifiers that can only toggle between fixed output states. PWM control delivers 10 distinct drying levels with instant on/off response, allowing the unit to modulate moisture extraction in proportion to actual atmospheric demand rather than cycling through binary states. Automatic humidity detection drives real-time adjustment without operator input. Dual 6-inch (15 cm) ducting ports support exhaust delivery of dry air directly into the tent, with an optional intake port enabling a closed-loop configuration for maximum atmospheric isolation. The integrated UIS port connects the unit to smart controllers, unlocking Wi-Fi app access, VPD automations, AI unified climate management, data charting, and alert protocols. The unit operates from 209 to 350 watts on 120V AC / 60 Hz, with a minimum operating temperature of 41°F (5°C), and achieves humidity levels as low as 25% RH. In practical terms, the HYDRONE 5 delivers 4L (0.5 gallon) moisture extraction capacity across a 5x5 footprint at 209–350 watts with dual 6-inch ducting ports and full UIS ecosystem integration.

Where This Belongs (and Doesn't)

Electrical and HVAC integration should be verified by a qualified technician prior to deployment. The HYDRONE 5 operates on 120V AC / 60 Hz. Confirm circuit capacity before connecting. Ducting configurations should comply with applicable facility ventilation standards.

How It Works

The HYDRONE 5 is built around a proprietary PWM-controlled rotary motor — the core architectural distinction that separates it from compressor-based dehumidifiers. Pulse-width modulation allows the motor to vary its output continuously across 10 discrete drying levels, each with instant on/off response. There is no compressor lag, no fixed-cycle limitation, and no binary output floor. The unit draws between 209 and 350 watts depending on the active drying level, operating on 120V AC at 60 Hz. Moisture extraction capacity is 4L (0.5 gallon), with an internal water collection tank that triggers an automatic shutoff alarm when full.

Atmospheric sensing is integrated at the unit level. Automatic humidity detection reads the environment continuously and drives real-time adjustment without operator input between cycles. When humidity exceeds safe thresholds, a high humidity alarm activates. A malfunction alarm signals system errors requiring service. The unit's auto-memory restore function ensures that programmed settings survive power interruptions and outlet controller cycling — a critical reliability feature in automated deployment environments where outlet controllers manage power scheduling.

Ducting architecture is dual-port: two 6-inch (15 cm) ports support both exhaust delivery of dry air into the tent and an optional intake configuration for closed-loop operation. The closed-loop setup isolates the atmospheric environment from external air exchange, maximizing the precision of humidity control within the footprint. The integrated UIS port connects the HYDRONE 5 to the AC Infinity smart controller ecosystem, enabling Wi-Fi app access, VPD-based humidity automations, AI unified climate management, data charting, alert protocols, and grow guides. The unit measures 9.52 in. (24.2 cm) L x 10.23 in. (26.0 cm) W x 15.66 in. (39.8 cm) H and is rated for operation down to a minimum of 41°F (5°C). In practical terms, the HYDRONE 5 delivers continuous PWM-modulated moisture extraction across a 5x5 footprint at 209–350 watts with dual 6-inch ducting ports, UIS ecosystem connectivity, and a minimum operating temperature of 41°F (5°C).

System Integration

• UIS Ecosystem: The integrated UIS port connects the HYDRONE 5 to AC Infinity smart controllers, enabling Wi-Fi app access, VPD humidity automations, AI unified climate management, data charting, and alert protocols across a unified atmospheric control system.
• Outlet Controller Compatibility: Auto-memory restore ensures programmed drying levels and settings are retained through power cycling, making the unit fully compatible with outlet controller-managed power schedules.
• Closed-Loop Ducting: The optional intake port, combined with the exhaust port, supports a closed-loop ducting configuration that isolates the internal atmospheric environment and maximizes RH precision within the 5x5 footprint.
• Drainage Integration: The internal reservoir supports optional gravity drain hose connection for continuous operation without manual tank emptying — reducing operator intervention in automated deployment schedules.
• Alarm Architecture: Three integrated alarm states (water tank full, high humidity, malfunction) feed into the broader monitoring ecosystem, supporting alert-based response protocols when connected to smart controllers.

Operator Field Notes

• Cold-Climate Reliability: The PWM rotary motor architecture maintains effective dehumidification down to 41°F (5°C) — a threshold where compressor-based units typically fail or produce degraded output. Facilities operating in cold environments or unheated ancillary spaces should verify this minimum temperature is maintained at the unit's installation location.
• Drain Hose Configuration: For continuous automated operation, connect the optional gravity drain hose to eliminate manual tank emptying. The internal reservoir triggers an automatic shutoff when full — in unattended deployments, this shutoff will interrupt humidity control until the tank is cleared. The drain hose eliminates this failure mode.
• Closed-Loop vs. Exhaust-Only: The exhaust port alone delivers dry air into the tent. Activating the optional intake port creates a closed-loop configuration that recirculates internal air through the dehumidifier, increasing extraction efficiency and reducing the influence of external humidity on the internal environment. Closed-loop is the preferred configuration for maximum RH precision.
• Auto-Memory Restore: When the HYDRONE 5 is managed by an outlet controller on a power schedule, the auto-memory restore function ensures the unit returns to its last programmed drying level on power restoration. Verify this setting is active before deploying in any automated power-cycling environment.
• Alarm Response Protocol: Three alarm states are active: water tank full (automatic shutoff), high humidity (threshold exceeded), and malfunction (system error requiring service). In UIS-connected deployments, configure alert notifications in the app so alarm events are captured in the data log and trigger operator response without requiring physical inspection of the unit.
• Preorder Fulfillment: Orders containing the HYDRONE 5 alongside other items will ship when ALL items in the order are available. If timeline is critical, order the HYDRONE 5 separately to avoid fulfillment delays caused by other items in a mixed order.

Operator FAQ

Shipping & Logistics

• Shipping Region: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this region cannot be fulfilled.
• Preorder Fulfillment: Preorders placed by March 3, 2026 ship by March 20, 2026. Preorders placed March 4, 2026 and onwards ship by April 24, 2026. Mixed orders containing pre-ordered items ship when ALL items are available.
• Returns: Contact Cannafull Spectrum Solutions prior to initiating any return. Defective units are handled under manufacturer warranty terms. Non-defective returns are subject to review and must be in original, uninstalled condition.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

For pre-sale technical consultation, order support, or fleet procurement inquiries, contact Cannafull Spectrum Solutions directly before placing your order.

What's in the Box

The following components are confirmed included with the AC Infinity HYDRONE 5 (SKU: AC-DHT5) based on manufacturer source data:

• Main dehumidification unit (HYDRONE 5)
• Water collection tank
• Power cord with plug
• Air intake filters
• User manual and quick start guide
• Drain hose (optional — included for gravity drain configuration)
• Optional duct connection kit

Note: Component inclusion is based on manufacturer documentation available at time of publication. Cannafull Spectrum Solutions cannot guarantee against manufacturer changes to box contents without notice. Verify included components upon receipt. Optional accessories including 8-ft ducting ($16.99) and 25-ft ducting ($25.99) are available separately.

Regional Compliance & Deployment Notes

• Electrical Standard: The HYDRONE 5 operates on 120V AC / 60 Hz. This is the standard residential and commercial electrical supply in the contiguous United States. Verify circuit capacity before deployment, particularly in multi-unit configurations. Maximum draw is 350 watts per unit.
• Jurisdiction: Cannafull Spectrum Solutions fulfills orders within the contiguous 48 United States only. Buyers are responsible for confirming that the purchase and use of cultivation equipment complies with applicable state and local regulations in their jurisdiction.
• Licensing Compliance: This product is sold as cultivation infrastructure equipment. Buyers operating in licensed cultivation facilities are responsible for ensuring all equipment deployments comply with their facility's license conditions, state regulatory requirements, and applicable building and electrical codes.
• UL / Safety Certification: Certification status is not specified in available source data. Buyers with facility-level certification requirements should confirm current certification status directly with AC Infinity or Cannafull Spectrum Solutions prior to procurement.
• Operational Guideline: Per manufacturer documentation, the HYDRONE 5 should not be operated continuously for more than 24 hours without inspection. Automated deployment schedules should incorporate periodic inspection intervals consistent with this guideline.

Compliance information is provided for reference only and reflects data available at time of publication. Cannafull Spectrum Solutions does not provide legal or regulatory compliance advice. Buyers are solely responsible for confirming that equipment use complies with all applicable federal, state, and local laws and regulations. Specifications and compliance status are subject to change by the manufacturer without notice.