Percha con clip ajustable de cuerda resistente AC Infinity | Seis pares

Quick Spec: 1/8" braided polypropylene rope  |  8-foot length  |  150 lbs/pair capacity  |  Zinc-plated steel carabiner  |  Stainless steel locking ratchet  |  12 pieces (6 pairs)  |  SKU: AC-RHA3-12

Precision Control in Any Space

Every centimeter of canopy distance that drifts out of spec is yield left on the table. When suspension hardware lacks a true locking mechanism, equipment creeps — lights climb away from the canopy under thermal expansion, fans sag under vibration load, and carbon filters tilt off-axis until airflow efficiency degrades. The operator compensates manually, repeatedly, burning labor hours on corrections that should never have been necessary. That is the silent cost of rigging hardware that was never engineered to hold position: not a single catastrophic failure, but a continuous, invisible drain on output consistency and staff time.

After deployment, the suspension layer of the grow environment becomes a solved problem. Every fixture hangs at the height the operator set. Adjustments take seconds — no tools, no re-rigging, no ladder time beyond the initial hang. When a light needs to move up two inches for late-stage stretch, the ratchet releases, repositions, and locks. When a filter needs to come down for media replacement, the carabiner unclips cleanly. The operator controls the environment; the environment does not control the operator.

The mechanism behind that reliability is straightforward: 1/8" braided polypropylene rope rated to 8 feet of working length, terminated at a zinc-plated steel carabiner for attachment and governed by a stainless steel locking ratchet whose internal gear assembly is built entirely from stainless steel components — not a mixed-metal construction that corrodes unevenly in humid grow conditions. Each pair carries a 150 lb rated load, and the pack ships as 12 pieces (6 pairs), providing enough suspension points to outfit a full lighting and ventilation array in a single order. In practical terms, the AC Infinity Rope Clip Hanger delivers 150 lbs/pair rated suspension across 8 feet of adjustable rope length with a stainless steel locking ratchet mechanism engineered for long-term smooth operation in high-humidity environments.

Where This Belongs (and Doesn't)

This product is a mechanical suspension accessory. It is not rated for electrical load-bearing, HVAC duct support beyond the stated weight capacity, or structural ceiling anchor applications. Always verify ceiling anchor point ratings independently before installation. Load ratings are per pair; do not exceed 150 lbs per pair in any configuration.

How It Works

The AC Infinity Rope Clip Hanger operates on a three-component suspension architecture. The primary load element is 1/8" braided polypropylene rope, 8 feet in length — a diameter and braid construction selected for grip consistency through the ratchet mechanism without the stretch or UV degradation common in lighter cordage. The attachment interface is a zinc-plated steel carabiner, providing a tool-free clip-and-release connection to equipment hang points, tent cross-bars, and ceiling anchor hardware. The control element is the stainless steel locking ratchet: a gear-driven adjuster whose internal components are built entirely from stainless steel, eliminating the corrosion failure mode that compromises mixed-metal ratchets in high-humidity grow environments over time.

Adjustment procedure requires no tools and no disassembly. The operator pulls the free end of the rope to raise the suspended load; the ratchet engages and holds position under load. To lower, the operator actuates the ratchet release, feeds rope, and the mechanism re-locks at the new position. The 8-foot rope length provides sufficient range to accommodate ceiling heights from low-profile tent configurations through standard commercial room heights, with enough remaining rope to allow future repositioning without re-rigging. Each pack contains 12 individual hangers — 6 pairs — providing bilateral suspension for up to 6 fixtures or equipment units in a single order. In practical terms, the AC Infinity Rope Clip Hanger delivers tool-free height adjustment across an 8-foot rope range at 150 lbs/pair rated capacity, with a fully stainless steel internal ratchet gear assembly designed for sustained operation in humid grow environments.

Commercial Assurance

System Integration

• Lighting Integration: Compatible with LED grow light fixtures, HID reflectors, and CMH units — any fixture with a standard hang point or yoke hook within the 150 lbs/pair load rating.
• Ventilation Integration: Pairs directly with AC Infinity inline fans and carbon filters, providing the adjustable suspension layer that allows duct alignment correction without full system teardown.
• Canopy Management: Supports dynamic light-to-canopy distance management across vegetative and flowering phases without re-rigging — ratchet adjustment handles the full range of height changes between growth stages.
• Multi-Point Suspension: Six pairs per pack allows simultaneous outfitting of a full lighting array and ventilation stack in a single order, reducing procurement cycles for new room builds and equipment upgrades.
• Ecosystem Compatibility: Designed for use within the AC Infinity grow environment ecosystem alongside controllers, fans, and lighting — suspension hardware that is specification-matched to the equipment it supports.

Facility Integration Data

The following table models procurement volume and per-unit economics for operators outfitting single rooms through multi-room facilities, based on the six-pair pack configuration at MAP pricing of $23.99 per pack.

Operator Field Notes

• Initial Hang: Thread the rope through the ratchet mechanism before clipping the carabiner to the anchor point — this is easier with the load unattached and prevents rope twist under weight.
• Load Distribution: For fixtures near the 150 lb/pair limit, use both hangers of a pair at equidistant points along the fixture's hang bar to distribute load evenly and prevent tilt.
• Humidity Environments: The stainless steel internal ratchet gears are specified for long-term operation in humid conditions; inspect carabiner gate function periodically as zinc-plated steel is corrosion-resistant but not corrosion-proof in sustained high-humidity environments.
• Height Marking: Mark rope at preferred heights with a paint marker or tape flag after initial setup — this eliminates re-measurement during stage transitions and speeds adjustment cycles.
• Excess Rope Management: Coil and secure excess rope above the ratchet with a velcro strap to prevent it from hanging into the canopy or interfering with airflow paths below the fixture.
• Replacement Cycle: Inspect rope for fraying at the carabiner termination point after each equipment removal cycle; braided polypropylene is durable but concentrated friction at the clip point is the primary wear location.

Operator FAQ

Shipping & Logistics

• Lead Time: In stock. Ships within 1-2 business days from order confirmation.
• Shipping Jurisdiction: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this jurisdiction cannot be fulfilled through this listing.
• Returns: Returns are accepted in accordance with Cannafull Spectrum Solutions' Return Policy. Products must be in original, uninstalled condition to qualify for return consideration.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions before ordering? Contact Cannafull Spectrum Solutions directly — our team is available to confirm stock, lead times, and volume pricing prior to purchase.

What's in the Box

• 12 x Adjustable Rope Clip Hangers (6 matched pairs)
• Each hanger: 1/8" braided polypropylene rope, 8-foot length
• Each hanger: Zinc-plated steel carabiner hook
• Each hanger: Stainless steel locking ratchet with stainless steel internal gear assembly

Note: Mounting hardware, ceiling anchors, and installation tools are not included. Verify ceiling anchor point load ratings independently before installation. Contents confirmed against SKU AC-RHA3-12 manufacturer source data. Packaging materials and any included documentation may vary by production run.

Regional Compliance & Deployment Notes

• Jurisdiction: This product is sold and shipped within the contiguous 48 United States only through Cannafull Spectrum Solutions.
• Load Compliance: Operators are responsible for verifying that ceiling anchor points, structural supports, and mounting hardware meet or exceed the load demands of the suspended equipment. The 150 lbs/pair rating applies to the hanger hardware only and does not certify the adequacy of the anchor point or supporting structure.
• Facility Permitting: Installation of grow infrastructure suspension systems in licensed cultivation facilities may be subject to state-level facility build-out permitting requirements. Consult your facility's compliance officer or licensed contractor before modifying ceiling anchor configurations in permitted spaces.
• Material Declarations: Rope material is braided polypropylene. Carabiner is zinc-plated steel. Ratchet internal gears are stainless steel. No material safety data is specified in source documentation beyond these material identifications; consult AC Infinity directly for full material declarations if required for facility compliance documentation.
• UPC: 819137021471 (SKU: AC-RHA3-12) — for procurement, inventory, and compliance record-keeping.

Product specifications, pricing, and availability are subject to change without notice. All technical data presented on this page is sourced from AC Infinity manufacturer documentation current at time of publication. Cannafull Spectrum Solutions makes no independent load-rating claims beyond those stated in manufacturer source data. This listing is valid for the contiguous United States only. For current warranty terms, contact Cannafull Spectrum Solutions or AC Infinity directly prior to purchase.