Mars Hydro TS 3000 420W LED Grow Light | 2.7 µmol/J PPE
Mars Hydro TS 3000 420W LED Grow Light | 2.7 µmol/J PPE 已缺货，一旦有货将立即发货。
Unlock Trade Pricing
Join our commercial tier for bulk pricing and inventory alerts.
Mars Hydro TS 3000 420W LED Grow Light | 2.7 µmol/J PPE
Mars Hydro TS 3000 420W LED Grow Light | 2.7 µmol/J PPE 已缺货，一旦有货将立即发货。
描述
描述
The Mars Hydro TS 3000 is a 420W passively cooled, full-spectrum bar-style LED grow light engineered for operators running compact vegetative and flowering canopies who need commercial-grade photon output without the capital overhead of premium-tier fixtures.
- Outcome: 1210 µmol/s PPF at 2.7 µmol/J PPE across a 4x4 ft flower footprint or 5x5 ft vegetative footprint
- Replaces: Undersized or inefficient HID and lower-efficacy LED fixtures that cannot sustain consistent PPFD across the canopy plane
- Environment: Grow tents, small rooms, cabinets, closets, and plant shelves operating within licensed commercial or craft-scale facilities
FACTORY-AUTHORIZED DEALER — CANNAFULL SPECTRUM SOLUTIONS
Deployed in licensed commercial facilities across the United States.
Quick Spec: 420W ± 5% | AC100–277V | 1210 µmol/s PPF | 2.7 µmol/J PPE | BridgeLux Diodes | 5x5 ft Veg / 4x4 ft Flower | 50,000 hr LED Lifespan | 5-Year Warranty | ETL, CE, RoHS, UKCA Certified
Precision Control in Any Space.
Guesswork is the most expensive line item in any cultivation operation, and most operators never see it on a balance sheet. When the fixture above your canopy cannot hold consistent output across its rated footprint, every cycle becomes a variable — some zones over-driven, others starved, and the gap between your best-performing plant and your worst-performing plant widens with every harvest. Lamp depreciation compounds the problem silently: a fixture that shipped at rated output may be delivering meaningfully less photon flux by month eighteen, and without metered verification, that degradation reads as a cultivation problem rather than an equipment problem. Manual dimming schedules that require physical intervention introduce another failure mode — the adjustment that didn't happen, the photoperiod that ran long, the intensity that never came down during a heat event. These are not edge cases. They are the operational baseline for facilities running equipment that was not designed to be managed at scale.
After deployment, the picture changes. The canopy plane receives uniform photon density from edge to center, eliminating the spatial variance that forces operators to compensate with plant repositioning or uneven fertigation. Scheduling runs through the MarsPro app over Bluetooth, meaning photoperiod transitions and dimming ramps execute on time without manual intervention at the fixture. Because the TS 3000 is passively cooled with no moving parts, there are no fan bearings to service, no thermal events triggered by blocked airflow, and no maintenance windows that interrupt production cycles. The detachable driver architecture means a driver fault does not take the entire fixture offline — the optical assembly stays in place while the driver is swapped, and the canopy never goes dark mid-cycle.
The mechanism behind that operational stability is a BridgeLux diode array drawing 420W ± 5% across an AC100–277V input range, producing 1210 µmol/s of total photon flux at a photon efficacy of 2.7 µmol/J. The spectral architecture covers 660–665 nm deep red, 730–740 nm far red, 3000–3200K warm white, and 6000–6500K cool white — a four-channel full-spectrum output that supports both vegetative development and flowering expression without fixture swaps. A patent reflector design concentrates that output across a 5x5 ft vegetative footprint or a 4x4 ft flowering footprint, and the iConnect daisy-chain capability allows multiple units to be linked and controlled from a single interface point as the facility scales. The ETL, CE, RoHS, and UKCA certifications confirm the fixture meets the electrical safety standards required for licensed facility deployment, and the 5-year warranty provides the cost-of-ownership certainty that capital planning requires. In practical terms, the TS 3000 delivers 1210 µmol/s PPF at 2.7 µmol/J PPE across a 4x4 ft flower canopy at 420W draw on any grid voltage between 100V and 277V.
Where This Belongs (and Doesn't)
Electrical installation must comply with local codes. Circuits should be evaluated by a licensed electrician before deployment. HVAC load calculations should account for fixture heat contribution. Cannafull Spectrum Solutions does not provide electrical or mechanical engineering services.
Coverage Footprint
- Vegetative: 5x5 ft (25 sq ft)
- Flowering: 4x4 ft (16 sq ft)
- Input Voltage: AC100–277V (universal)
- Draw: 420W ± 5%
Appropriate Deployment Contexts
- Grow tents sized 4x4 ft through 5x5 ft
- Small dedicated grow rooms with controlled environment
- Cabinet and closet builds with adequate ventilation clearance
- Plant shelving systems with vertical spacing sufficient for mounting height
- Multi-unit daisy-chain arrays in scaled vegetative propagation rooms
Not Recommended For
- Canopy footprints exceeding 5x5 ft without supplemental fixtures
- Outdoor or unenclosed environments
- Facilities without adequate thermal management for 420W continuous draw
- Applications requiring waterproof or wet-location rated fixtures
How It Works
The TS 3000 generates photon flux through a BridgeLux diode array configured across a bar-style form factor. Bar-style distribution spreads the emitting surface across a wider physical area than a single-panel design, which reduces hotspot intensity at the canopy center and improves uniformity across the full coverage footprint. The patent reflector design further shapes the output beam to concentrate photons downward into the canopy plane rather than allowing lateral scatter that does not contribute to plant-available light.
The four-channel spectral architecture — 660–665 nm deep red, 730–740 nm far red, 3000–3200K warm white, and 6000–6500K cool white — provides the photon wavelengths required across both vegetative and reproductive growth stages. Deep red at 660–665 nm drives chlorophyll A and B absorption at peak efficiency. Far red at 730–740 nm activates phytochrome-mediated responses including stem elongation management and photoperiod signaling. The warm and cool white channels fill the mid-spectrum range, supporting carotenoid synthesis and overall canopy photosynthetic efficiency. No fixture swap is required between growth stages — the same spectral output serves both phases of the production cycle.
Thermal management is entirely passive. There are no internal fans, no moving parts, and no components subject to mechanical wear under normal operating conditions. The fixture body dissipates heat through conductive and convective transfer across the bar structure. The detachable driver is physically separated from the optical assembly, which serves two functions: it removes the highest heat-generating component from direct proximity to the diodes, extending diode operating life, and it allows the driver to be replaced independently without disturbing the mounted fixture. LED lifespan is rated at 50,000 hours. Dimming is continuous and controllable via the MarsPro app over Bluetooth, enabling scheduled ramps, photoperiod automation, and multi-fixture coordination through the iConnect daisy-chain interface without per-fixture manual adjustment. In practical terms, the TS 3000 delivers 1210 µmol/s PPF at 2.7 µmol/J PPE across a 4x4 ft flower canopy with a 420W draw on AC100–277V input and a passively cooled, zero-moving-part thermal architecture rated to 50,000 hours of LED operation.
Commercial Assurance
- Warranty: 5-year manufacturer warranty covering defects in materials and workmanship
- LED Lifespan: 50,000 hours rated operational life under normal conditions
- Certifications: ETL, CE, RoHS, and UKCA — meets electrical safety standards required for licensed facility deployment across the United States
- Driver Architecture: Detachable driver allows independent replacement without fixture removal, minimizing canopy downtime during service events
- Voltage Compatibility: AC100–277V universal input — compatible with standard U.S. 120V circuits and 240V facility infrastructure without modification
- Authorized Source: Cannafull Spectrum Solutions is a factory-authorized dealer. All units are sourced through authorized distribution channels and carry full manufacturer warranty eligibility.
System Integration
- iConnect Daisy-Chain: Multiple TS 3000 units can be linked via the iConnect interface, enabling centralized control of multi-fixture arrays from a single connection point — reducing wiring complexity as canopy square footage scales.
- MarsPro App Control: Bluetooth-enabled scheduling and dimming control via the MarsPro app allows photoperiod programming and intensity ramps to execute automatically without manual fixture access.
- Universal Voltage Input: AC100–277V compatibility eliminates the need for step-down transformers or dedicated circuits in facilities already wired for 240V distribution.
- Detachable Driver: The driver module separates from the optical bar, allowing it to be positioned outside the canopy zone or replaced independently — compatible with facilities that route driver heat outside the grow space for HVAC load management.
- Scalable Deployment: The foldable design and bar-style form factor simplify transport, installation, and repositioning within multi-room or multi-tier facility configurations.
Facility Integration Data
The following ROI reference data is calculated using the TS 3000's rated 420W draw, a sale price of $249.99 per unit, and a projected yield benchmark of 2.4g/W — operators should validate against their own utility rates, canopy utilization, and production cycle data before committing to fleet sizing decisions.
| Fleet Size | Total Wattage | Total PPF (µmol/s) | Flower Canopy Coverage | Capital Outlay (Sale Price) | Projected Yield Benchmark |
|---|---|---|---|---|---|
| 10 Units | 4,200W | 12,100 µmol/s | 160 sq ft (10 × 4x4 ft) | $2,499.90 | ~1,008g/cycle (at 2.4g/W) |
| 20 Units | 8,400W | 24,200 µmol/s | 320 sq ft (20 × 4x4 ft) | $4,999.80 | ~2,016g/cycle (at 2.4g/W) |
| 50 Units | 21,000W | 60,500 µmol/s | 800 sq ft (50 × 4x4 ft) | $12,499.50 | ~5,040g/cycle (at 2.4g/W) |
Yield projections are manufacturer-stated benchmarks at rated wattage. Actual results depend on strain genetics, environmental controls, fertigation protocol, and canopy management. Fleet pricing does not include volume discount agreements — contact Cannafull Spectrum Solutions for fleet procurement pricing.
Operator Field Note
- The detachable driver is the most operationally significant feature for facilities running continuous production cycles — a driver fault becomes a 10-minute swap rather than a fixture replacement event that takes the zone offline.
- The AC100–277V input range means this fixture can be deployed on existing 120V circuits without rewiring, or integrated into 240V facility infrastructure without a transformer — verify your circuit amperage before connecting multiple daisy-chained units on a single breaker.
- Passive cooling performs as rated only when the fixture has adequate airspace above and around the bar structure — installations in tightly enclosed spaces without active air circulation should account for ambient temperature rise at the fixture level.
- The MarsPro Bluetooth control range is line-of-sight dependent — in facilities with dense racking or multiple rooms, verify signal reach before committing to a daisy-chain topology that relies on a single Bluetooth connection point.
- At 2.7 µmol/J PPE and a 4x4 ft flower footprint, this fixture is positioned at the upper boundary of the budget-commercial tier — operators comparing against premium fixtures at 3.0+ µmol/J should model the energy cost differential against the capital cost difference over the 50,000-hour rated lifespan before making a fleet decision.
- Physical dimensions and weight are not specified in manufacturer source data — confirm mounting hardware load ratings and ceiling clearance with your facility's structural specifications before installation.
Operator FAQ
Q: What is the actual power draw of the TS 3000, and what circuit does it require?
A: The TS 3000 draws 420W ± 5% at rated operation across an AC100–277V input range. On a standard 120V circuit, this equates to approximately 3.5A at full power. On a 240V circuit, the draw is approximately 1.75A. A dedicated 15A circuit at 120V can support multiple units — calculate total amperage load before daisy-chaining fixtures on a single breaker. Consult a licensed electrician for circuit load verification in your specific facility configuration.
Q: What is the difference between the 5x5 ft and 4x4 ft coverage areas listed for this fixture?
A: The 5x5 ft coverage area (25 sq ft) is the rated vegetative footprint — the zone over which the fixture delivers sufficient PPFD to support vegetative growth and canopy development. The 4x4 ft coverage area (16 sq ft) is the rated flowering footprint — the tighter zone over which the fixture delivers the higher PPFD levels required to drive flowering and maximize yield expression. Operators running a 5x5 ft canopy through flower will see reduced PPFD at the canopy edges relative to the center. For flowering production, a 4x4 ft canopy boundary is the recommended operational limit.
Q: How does the iConnect daisy-chain system work, and how many units can be linked?
A: The iConnect interface allows multiple TS 3000 units to be linked in a chain configuration, enabling control of the entire array through a single connection point via the MarsPro app over Bluetooth. This eliminates the need to adjust each fixture individually for dimming or scheduling changes. The maximum number of units per daisy-chain is not specified in manufacturer source data — contact Mars Hydro or Cannafull Spectrum Solutions for chain length limits applicable to your facility layout before designing a multi-unit control topology.
Q: What certifications does the TS 3000 carry, and are they sufficient for licensed facility compliance?
A: The TS 3000 carries ETL, CE, RoHS, and UKCA certifications. ETL listing is the primary certification relevant to U.S. licensed facility compliance — it confirms the fixture has been tested to applicable UL safety standards by an OSHA-recognized Nationally Recognized Testing Laboratory. CE and UKCA are European and UK market certifications. RoHS confirms compliance with restrictions on hazardous substances in electrical equipment. Whether these certifications satisfy your specific facility's licensing requirements depends on your state's regulatory framework and your facility's insurance and inspection requirements — verify with your compliance officer before deployment.
Q: What does the 5-year warranty cover, and what is the claims process through Cannafull Spectrum Solutions?
A: The TS 3000 carries a 5-year manufacturer warranty covering defects in materials and workmanship under normal operating conditions. As a factory-authorized dealer, Cannafull Spectrum Solutions facilitates warranty claims through the manufacturer's authorized process. To initiate a warranty claim, contact Cannafull Spectrum Solutions with your order number, a description of the defect, and supporting documentation (photos or video). Warranty coverage does not extend to damage resulting from improper installation, electrical surges, water ingress, or use outside the fixture's rated operating parameters. Full warranty terms are available at cannafullspec.com.
Q: How does the TS 3000's 2.7 µmol/J PPE compare to premium-tier fixtures, and when does the efficiency gap matter?
A: At 2.7 µmol/J, the TS 3000 operates at the upper boundary of the budget-commercial efficacy tier. Premium-tier fixtures from competing manufacturers typically rate between 2.9 and 3.2 µmol/J. The practical difference is energy cost per µmol delivered: at 2.7 µmol/J versus 3.0 µmol/J, a 420W fixture produces approximately 10% fewer photons per watt consumed. Over a 50,000-hour rated lifespan at $0.12/kWh, that efficiency gap represents a calculable energy cost differential. For operators running large fleets at high utilization rates, the energy cost difference may offset the lower capital cost of the TS 3000 over a multi-year horizon. For operators scaling a facility on constrained capital with moderate utilization, the TS 3000's lower acquisition cost and 5-year warranty provide a defensible total cost of ownership position. Model both scenarios against your actual utility rate and production schedule before making a fleet decision.
Shipping & Logistics
- Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, and international destinations cannot be fulfilled through this listing.
- Lead Time: In-stock orders typically ship within 1–3 business days. Freight timelines for multi-unit fleet orders may vary — contact us before placing large-quantity orders to confirm availability and lead time.
- Returns: Returns are accepted within the policy window for items in original, uninstalled condition. Defective units are handled through the manufacturer warranty process. Contact Cannafull Spectrum Solutions before initiating any return to receive a Return Merchandise Authorization (RMA) number.
- Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.
For fleet procurement, warranty claims, or pre-purchase technical questions, contact Cannafull Spectrum Solutions directly at cannafullspec.com.
What's in the Box
- Mars Hydro TS 3000 420W LED Grow Light (bar-style fixture with patent reflector)
- Detachable driver unit
- Hanging hardware (ratchet hangers or equivalent — confirm with current manufacturer packaging)
- Power cord
- User documentation
Box contents are based on manufacturer-stated inclusions at time of publication. Mars Hydro may update packaging contents without notice. If specific accessory inclusion is critical to your deployment, confirm current box contents with Cannafull Spectrum Solutions before ordering. iConnect cables for daisy-chain configurations may be sold separately — verify with your order.
Regional Compliance & Deployment Notes
- The TS 3000 carries ETL listing, which confirms testing to applicable UL standards by an OSHA-recognized NRTL. ETL listing is recognized by electrical inspectors and AHJs (Authorities Having Jurisdiction) across the United States.
- CE and UKCA certifications are European and United Kingdom market authorizations. They are not U.S. compliance certifications and should not be cited as U.S. regulatory compliance in facility licensing documentation.
- RoHS compliance confirms the fixture meets restrictions on hazardous substances in electrical and electronic equipment — relevant for facilities subject to environmental compliance audits.
- Licensed cannabis cultivation facilities in the United States operate under state-specific regulatory frameworks. Electrical equipment compliance requirements vary by state and by the specific licensing tier. Operators are responsible for verifying that the TS 3000's certifications satisfy their state's facility licensing and inspection requirements before deployment.
- The AC100–277V universal input is compatible with U.S. standard residential and commercial electrical infrastructure. All installations must comply with the National Electrical Code (NEC) and applicable local amendments. Cannafull Spectrum Solutions does not provide electrical engineering or code compliance services.
- Cannafull Spectrum Solutions ships within the contiguous 48 United States only. This product listing is not available for shipment to addresses outside the contiguous United States.
Product specifications, certifications, and pricing are subject to change by the manufacturer without notice. All data presented in this listing reflects manufacturer-published specifications at time of publication. Cannafull Spectrum Solutions makes no independent performance guarantees beyond the manufacturer's stated warranty. Verify current specifications with Cannafull Spectrum Solutions before finalizing procurement decisions for large-scale deployments.
Route Package Protection
Route Package Protection
在 CannaFull Spectrum Solutions，我们明白在运输过程中安心是至关重要的。这就是为什么我们自豪地为您的所有在线订单提供全面的运输保护和跟踪解决方案 Route！
Route：您的一体化运输中心
Route 与您的 CannaFull Spectrum Solutions 购物体验无缝集成，让您完全掌控配送过程，安心无忧。以下是 Route 提供的功能：
- 自动包裹保护：在 CannaFull Spectrum Solutions 上下的每个订单都会自动附带 Route 的基本保护计划，保护您的购买免遭包裹丢失、被盗或损坏。
- 增强型跟踪： Route 超越了基本跟踪信息。获取实时更新、预计交付时间以及有关潜在延误或问题的主动警报。
- 轻松的索赔管理：如果您的包裹遇到问题，Route 可简化索赔流程。直接通过 Route 应用提出索赔，即可快速高效地获得解决方案。
- 价格匹配保证： Route 可确保您获得最优惠的价格。如果您在一定时间内（通常为 48 小时）发现同一商品的广告价格更低，Route 将退还差价。
- 丢失邮件更换： Route 提供额外的安全保障。如果您的包裹被标记为已送达但您从未收到，Route 可能会更换它，具体取决于具体物品和承保选项。
使用大麻全光谱解决方案路线的好处：
- 放心购物：知道您购买的商品不会丢失、被盗或损坏，您就可以完全放心购物。
- 轻松跟踪：利用 Route 的实时跟踪和主动通知随时了解每一步情况。
- 轻松索赔： Route 简化了索赔流程，在您遇到任何与交付相关的问题时，可为您节省时间并避免烦恼。
- 每次购买都增加价值： Route 会自动为您的 [您的商店名称] 订单提供基本保护和有价值的跟踪功能，无需支付额外费用。
如何开始路线：
使用 Route 购买 CannaFull Spectrum Solutions 简单又方便：
- 完成您的订单：当您在 CannaFull Spectrum Solutions 结账时，您将看到激活 Route 对您的订单的保护的选项（通常是预先选择的）。
- 下载路线应用程序：为了获得更加无缝的体验，请下载适用于 iOS 和 Android 的免费路线应用程序。
- 追踪您的包裹：登录路线应用程序或查看您的电子邮件以获取追踪更新并管理您的受保护货件。
Route：您的无忧运输合作伙伴
CannaFull Spectrum Solutions 致力于通过每次购买提供 Route 服务，为您提供无压力的购物体验。Route 让您可以放心购物，因为您知道您的包裹受到保护，并且每一步都可以轻松跟踪。
常见问题：
- Route 是免费的吗？ CannaFull Spectrum Solutions 的每笔订单都会自动包含基本 Route 保护。Route 还提供具有附加功能和覆盖范围的可选高级计划。
- 如何向 Route 提出索赔？可通过 Route 应用程序或网站轻松提出索赔。
- 如果我的包裹丢失了怎么办？根据具体情况和您选择的保险计划，Route 可能会赔偿您或更换丢失的物品。
放心购物，轻松追踪！选择 CannaFull Spectrum Solutions，在下次在线购物时体验 Route 的强大功能。
Shiping, Cancelations & Returns
Shiping, Cancelations & Returns
- 标准运费（预计 3-5 个工作日内送达）：X 美元（Y 美元以上订单免费）
- 加急运输（预计 1-2 个工作日内送达）：$Z
国际运输（如适用）：我们目前提供/不提供国际运输。（如果您提供，请注明费率和预计交货时间）。
追踪和路线保护：订单发货后，您将通过电子邮件收到带有追踪号的通知。我们还与 Route 合作，在结账时为所有订单提供额外的运输保护（包裹丢失、被盗或损坏），只需支付少量费用。
请注意：由于代发货的特性，送货时间可能比其他商店宣传的稍长。我们努力提供尽可能准确的估算，但可能会出现不可预见的情况。
取消政策
我们理解计划可能会发生变化，因此您可以在下单后 24 小时内取消订单并获得全额退款。如果您的订单已转发给我们的履行合作伙伴，我们将尽力满足您的取消请求，但可能会收取全额取消费或商店信用额。
退货政策
我们希望您对所购商品完全满意。如果您出于任何原因不满意，您可以在购买之日起 30 天内退回符合条件的商品。
符合条件的商品：大多数全新、未使用、未开封且带原包装的商品均符合退货条件。例外情况可能包括（如适用，请列出任何例外情况，例如最终销售商品或易腐烂商品）。
退货条件：要获得全额退款，退回的商品必须是未使用状态，且所有原始标签和包装完好无损。
退货运费：如果退货是由于我们的错误（例如，寄送了错误的商品）造成的，我们将承担退货运费。否则，您将承担退货运费。但是，您可以使用 Route 的保护计划（如果购买）来补偿丢失、被盗或损坏包裹的退货运费。
退款流程：收到您退回的商品并核实其状况后，我们将在 X 个工作日内处理您的退款。退款将以您原来的付款方式或商店信用额度发放，具体取决于您的偏好。
通过在我们这里购物，您同意本运输、取消和退货政策中概述的条款。
Warranty
Warranty
在 CannaFull Spectrum Solutions，我们希望您对购买的产品充满信心。我们提供的许多 LED 生长灯都附带制造商保修，确保您的投资得到保护。
了解您的保修：
- 具体保修条款和条件将根据您购买的个别产品而有所不同。
- 我们强烈建议您在收到产品时查看随附的制造商保修信息。
- 该信息通常详细说明保修期、保险范围和索赔流程。
帮助中心：
虽然保修由制造商直接处理，但我们理解处理保修索赔有时会令人困惑。在 CannaFull Spectrum Solutions，我们在整个过程中为您提供支持：
- 轻松访问保修信息：我们努力在每个产品页面上提供清晰简明的保修信息。这通常包括可下载的保修文件或制造商保修网站的链接。
- 专属客户支持：如果您对产品保修有任何疑问或需要帮助提出索赔，请随时联系我们友好的客户支持团队。我们将很乐意指导您完成整个流程，并帮助您从制造商处获得应有的支持。
我们能做什么：
虽然我们不能直接处理保修索赔，但我们可以通过以下几种方式为您提供帮助：
- 帮助找到您的特定产品的相关保修信息。
- 提供制造商保修部门的联系方式。
- 提供有关完成和提交保修索赔的指导。
- 充当您和制造商之间的联络人，让您随时了解整个过程。
我们对您的承诺：
CannaFull Spectrum Solutions 致力于提供积极的客户体验。我们希望您对购买的产品感到满意，这包括确保您的保修索赔得到迅速有效的处理。
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Buy now pay later with
