Mars Hydro FC-1500 EVO 150W LED Grow Light | 2.85 μmol/j PPE

Precision Control in Any Space

Every facility running inconsistent equipment is bleeding yield it cannot account for. When your light source degrades without warning, when thermal output forces you to raise mounting height and sacrifice PPFD at the canopy, when your only control option is a manual dimmer with no scheduling logic — the losses compound silently across every cycle. Lamp depreciation, uneven canopy density, and manual control dead zones are not minor inconveniences; they are structural inefficiencies that erode margin on every harvest without appearing on any single line of your cost report.

After deploying the FC-1500 EVO, the operational picture changes materially. Canopy coverage becomes uniform and repeatable because photon output is stable across a rated 50,000-hour diode lifespan with no replacement cycles scheduled. Scheduling and dimming are handled through the iConnect app — seedling, vegetative, and flowering stages each receive a calibrated intensity setting without manual intervention at the fixture. Thermal load is managed passively, meaning no fan motors to maintain, no airflow dependencies, and no heat spikes that force canopy adjustments mid-cycle.

The mechanism behind that operational stability is the Samsung LM301H EVO diode array, rated at 3.14 µmol/j per individual diode — the highest per-diode efficacy available in this fixture class. At the system level, the FC-1500 EVO converts 150W ± 5% of electrical input into 427.5 µmol/s of total photon flux at 2.85 µmol/j PPE, delivered across a full-spectrum output spanning 660-665 nm red, 2800-3000K warm white, and 4800-5000K cool white channels. Coverage footprint is 2x2 ft (60x60 cm) at core intensity and extends to 2.5x2.5 ft at maximum range. The iConnect Smart Controller enables app-based dimming with stage-specific presets — 25% for seedling, 75% for vegetative, 100% for flower — and supports daisy-chaining up to 30 units for coordinated multi-zone scheduling from a single control interface. In practical terms, the FC-1500 EVO delivers 427.5 µmol/s PPF across a 2x2 ft core footprint at 150W draw, operating at 1.27A on AC120V with a passive thermal architecture that requires no active cooling infrastructure.

Where This Belongs (and Doesn't)

Electrical installation must comply with all applicable local codes. Consult a licensed electrician before integrating into existing circuits. HVAC load calculations should account for 512 BTU/hr per unit when sizing ventilation for multi-unit deployments.

How It Works

The FC-1500 EVO is built around the Samsung LM301H EVO diode — the current benchmark for per-diode efficacy in commercial horticultural lighting at 3.14 µmol/j per chip. The diode array outputs a full-spectrum profile across three calibrated channels: 660-665 nm targeted red for photosynthetic activation, 2800-3000K warm white for broad-spectrum vegetative support, and 4800-5000K cool white for canopy penetration and secondary metabolite expression. This multi-channel architecture ensures that photon delivery is biologically relevant across all growth stages rather than concentrated in a single spectral band.

The bar-style form factor — three light bars across a 15.7x16.4x2.8 inch (41.7x40x7.2 cm) fixture body — distributes photon output evenly across the canopy plane, eliminating the hot-spot concentration common in single-source puck designs. Passive cooling through the aluminum bar structure dissipates 512 BTU/hr without fan motors, removing the primary mechanical failure point in active-cooled fixtures and reducing audible noise output to zero. Recommended mounting height is 12 inches (30 cm) above canopy.

Control architecture is handled through the iConnect Smart Controller, which connects the FC-1500 EVO to a mobile app interface for remote dimming, scheduling, and stage-specific intensity programming. Manufacturer-recommended dimming presets are 25% for seedling, 75% for vegetative, and 100% for flowering — each setting optimized to match the photon demand curve of the corresponding growth phase. The daisy-chain port supports up to 30 units per controller, enabling coordinated multi-zone light scheduling across an entire facility floor from a single app interface without per-fixture manual adjustment. Electrical input is rated at AC120-277V, drawing 1.27A at AC120V, 0.6381A at AC240V, and 0.5615A at AC277V at 50/60 Hz, providing compatibility with standard U.S. commercial electrical infrastructure. In practical terms, the FC-1500 EVO delivers 427.5 µmol/s PPF at 2.85 µmol/j PPE across a 2x2 ft core footprint, operating at 150W ± 5% with a 50,000-hour rated diode lifespan and zero active cooling components.

Commercial Assurance

The FC-1500 EVO carries a 5-year warranty covering manufacturing defects and component failure under normal operational conditions, consistent with Mars Hydro's FC Series after-sales service commitment. Certifications include ETL, CE, UKCA, and RoHS — confirming compliance with U.S. electrical safety standards and international environmental directives.

• Diode Lifespan: 50,000 hours rated — no lamp replacement cycles within standard multi-year production schedules
• Electrical Safety: ETL Listed — verified for U.S. commercial electrical infrastructure at AC120-277V
• Environmental Compliance: RoHS — restricted hazardous substances directive compliance confirmed
• Warranty Period: 5 years — FC Series manufacturer warranty
• Authorized Dealer: Cannafull Spectrum Solutions is a factory-authorized dealer. Warranty claims are processed through manufacturer-approved channels.

System Integration

• Electrical: AC120-277V universal input; 1.27A at AC120V, 0.6381A at AC240V, 0.5615A at AC277V; 50/60 Hz — compatible with standard U.S. commercial single-phase circuits
• Thermal: Passive aluminum bar cooling; 512 BTU/hr per unit; no active cooling components; size ventilation for multi-unit deployments accordingly — minimum 4-inch inline duct fan recommended per enclosure
• Control: iConnect Smart Controller (included in this bundle) required for app-based scheduling and dimming; daisy-chain supports up to 30 units per controller for centralized multi-zone management
• Mounting: Recommended hanging height 12 inches (30 cm) above canopy; fixture dimensions 15.7x16.4x2.8 inches (41.7x40x7.2 cm); foldable bar design for compact storage and transport between deployment zones
• Enclosure Compatibility: Optimized for 70x70x160 cm grow tent format; core coverage 2x2 ft (60x60 cm); maximum coverage 2.5x2.5 ft

Facility Integration Data

The following ROI reference data is provided to assist procurement and operations teams in evaluating electrical load, thermal output, and photon delivery at fleet scale. All values are derived directly from manufacturer-specified electrical and photometric data for the FC-1500 EVO at rated wattage.

Operator Field Notes

• Dimming presets are stage-specific, not arbitrary: Manufacturer-recommended settings are 25% for seedling, 75% for vegetative, and 100% for flower — each calibrated to the photon demand curve of that growth phase. Deviating from these settings without monitoring DLI accumulation can result in light stress or underdosing at critical development windows.
• iConnect Controller is required for app control: The FC-1500 EVO does not connect to any third-party control system. App-based scheduling and dimming require the iConnect Smart Controller included in this bundle. Verify controller pairing before commissioning a multi-unit daisy-chain array.
• Daisy-chain limit is 30 units per controller: Exceeding this limit is not supported by the iConnect architecture. Plan zone segmentation accordingly for facilities deploying more than 30 fixtures.
• Passive cooling requires unobstructed airflow across bar surfaces: Do not mount the fixture flush against reflective panels or in configurations that trap heat against the bar array. Minimum 4-inch inline duct fan ventilation is recommended per enclosure to maintain stable operating temperature.
• Mounting height affects PPFD at canopy: Manufacturer-recommended hanging height is 12 inches (30 cm). Raising the fixture to manage heat at the expense of mounting height will reduce photon flux density at the canopy surface — adjust dimming output to compensate if mounting height must be increased.
• Voltage selection affects amperage draw: At AC120V the fixture draws 1.27A; at AC240V it draws 0.6381A; at AC277V it draws 0.5615A. For high-density deployments, operating at 240V or 277V reduces per-circuit amperage load and allows more units per breaker.

Operator FAQ

Shipping and Logistics

• Shipping Jurisdiction: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, and all international destinations including Canada cannot be fulfilled.
• Package Contents Note: This product ships in two separate packages. Package 1 contains the FC-1500 EVO light unit. Package 2 contains the iConnect Smart Controller and associated accessories. Both packages must be received and inspected before commissioning. If only one package arrives, contact support before opening or installing any components.
• Returns: Returns are accepted for defective units within the warranty period. Non-defective returns are subject to the conditions outlined in the Cannafull Spectrum Solutions Return Policy. Inspect all packages upon delivery and document any shipping damage with photographic evidence before initiating a claim.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions about your order? Contact Cannafull Spectrum Solutions at support@cannafullspec.com or through the contact portal at cannafullspec.com.

What's in the Box

The following items are confirmed in the manufacturer's package contents for this bundle (FC-1500 EVO + iConnect Smart Controller):

• Mars Hydro FC-1500 EVO 150W LED Grow Light (3-bar assembly)
• iConnect Smart Controller
• Controller accessories (cables and mounting hardware as packed by manufacturer)
• Hanging hardware for fixture mounting

Package contents are confirmed based on manufacturer documentation available at time of listing. Cannafull Spectrum Solutions does not modify or repack manufacturer shipments. If any item listed above is missing upon receipt, contact support immediately and retain all original packaging for the claims process. Do not install the fixture until all package contents have been verified.

Regional Compliance and Deployment Notes

• ETL Listing: The FC-1500 EVO is ETL Listed, confirming compliance with applicable U.S. electrical safety standards. ETL certification is recognized by Authorities Having Jurisdiction (AHJ) across licensed U.S. facilities for electrical equipment approval.
• Input Voltage Compatibility: AC120-277V universal input is compatible with standard U.S. commercial single-phase electrical infrastructure. Verify circuit amperage capacity before deploying multi-unit daisy-chain arrays — at AC120V each unit draws 1.27A.
• RoHS Compliance: Confirms that the fixture is manufactured without restricted hazardous substances, supporting waste disposal compliance under applicable U.S. state environmental regulations governing electronic equipment.
• Shipping Jurisdiction: Available for deployment in licensed commercial facilities across the contiguous 48 United States. Cannafull Spectrum Solutions does not ship to Canadian provinces, U.S. territories, or international destinations.
• Facility-Specific Compliance: Operators are responsible for verifying that fixture installation meets the requirements of their specific state licensing authority, local building code, and AHJ. ETL listing satisfies electrical safety documentation requirements in most jurisdictions but does not substitute for facility-level compliance review.

Compliance information is provided for reference only and reflects certification status at time of listing. Cannafull Spectrum Solutions makes no representation that ETL, CE, UKCA, or RoHS certification satisfies all requirements of any specific state cannabis licensing authority or local AHJ. Operators should consult their compliance officer and licensed electrician prior to installation. Specifications subject to change by manufacturer without notice.