Harvest Right Resealable Mylar Bags 6x9.75 50-Pack | 7 Mil Puncture-Resistant

Quick Spec: 6" W × 9.75" L resealable mylar pouch — 50-count pack — SKU: MB-005 — MAP: $23.95

Seal the Batch. Hold the Standard.

Every operator who has run a clean lyophilization cycle knows the frustration that follows: the process is dialed in, the sublimation curve is tight, the output is pharmaceutical-grade — and then the packaging fails. Moisture migrates back through a compromised seal. Terpene volatiles escape through a pouch that was never rated for repeated access. Batches that should carry a six-month shelf life degrade in weeks because the final link in the preservation chain was treated as an afterthought. The enemy is not the freeze dryer. The enemy is the assumption that any bag will do once the hard work of lyophilization is complete. That assumption has a cost, and it compounds silently across every batch that leaves the facility underprotected.

After deployment, the post-harvest workflow closes cleanly. Each freeze-dried batch moves from tray to a rated resealable barrier that maintains the moisture exclusion established during the sublimation cycle. Operators access stored product between production runs without sacrificing seal integrity — the resealable closure re-engages to the same barrier standard after every opening. Shelf stability is no longer a variable that degrades with each access event. The batch that was processed to pharmaceutical-grade dryness stays at pharmaceutical-grade dryness through distribution, storage, and repeated inspection cycles.

The mechanism is the multi-layer mylar construction itself. At 6" W × 9.75" L, the pouch format is sized to accept output from Harvest Right freeze dryer tray batches and provides a surface area that accommodates standard impulse-sealer closures as well as the integrated resealable strip for post-seal access. The mylar laminate provides the moisture vapor transmission resistance and light-blocking opacity required to maintain potency preservation and terpene retention in stored lyophilized product. The 50-count pack format supports batch processing workflows where consistent, same-format packaging across an entire production run is a quality-control requirement, not a convenience. In practical terms, the 6x9.75 Resealable Mylar 50 Pack delivers a repeatable, rated moisture barrier across 50 individual batch-storage units at a MAP of $23.95 per pack.

Where This Belongs (and Doesn't)

Packaging compatibility and storage environment: Confirm that your facility's storage conditions (temperature, humidity, light exposure) are consistent with lyophilized product requirements. This pouch format is designed for post-freeze-dry packaging of dry, shelf-stable output. It is not rated for liquid, high-moisture, or fresh product storage. Consult your facility's post-harvest SOP before integrating into an active production line.

How It Works

The 6x9.75 Resealable Mylar 50 Pack functions as the terminal preservation layer in a lyophilization workflow. Once the freeze dryer completes its sublimation cycle and product moisture content has been reduced to shelf-stable levels, the batch is transferred directly into the mylar pouch. The multi-layer mylar laminate construction provides a moisture vapor transmission barrier that prevents ambient humidity from re-entering the pouch and reversing the dryness achieved during lyophilization. The light-blocking opacity of the mylar layer protects photosensitive compounds — including terpenes and secondary metabolites — from UV and visible-light degradation during storage and distribution.

The resealable closure strip is the operational differentiator. Standard single-use mylar pouches require the operator to cut and re-seal with an impulse sealer every time the batch is accessed — a process that progressively shortens the usable pouch length and introduces seal-quality variability with each cycle. The integrated resealable closure on this format allows the operator to open and re-close the pouch without heat-sealing equipment, maintaining a functional moisture barrier across multiple access events. This is operationally significant in facilities where batch inspection, partial dispensing, or quality sampling occurs between the initial packaging date and final distribution. The 50-count pack format ensures that a full production run can be packaged in a single consistent format, eliminating the batch-to-batch variation that occurs when operators mix pouch sizes or sources mid-run. In practical terms, the 6x9.75 Resealable Mylar 50 Pack delivers a resealable, light-blocking, moisture-barrier packaging unit across 50 same-format pouches sized for Harvest Right freeze dryer batch output.

System Integration

• Freeze Dryer Compatibility: Sized for use with Harvest Right Pro series freeze dryers; pouch dimensions accommodate tray batch output from Small through X-Large Pro models.
• Impulse Sealer Integration: Pouch top is compatible with standard impulse sealer closure for permanent heat-seal applications; resealable strip provides secondary closure for repeated-access workflows.
• Oxygen Absorber Compatibility: Interior volume accommodates standard 50cc–100cc oxygen absorbers for extended shelf-stability protocols requiring dual-barrier (moisture + oxygen) protection.
• Batch Labeling: Exterior mylar surface accepts permanent marker, printed label stock, and thermal-transfer label formats for batch tracking and compliance documentation.
• Storage System Integration: Pouch dimensions are compatible with standard archive box, bin, and rack storage formats used in controlled-environment post-harvest storage rooms.

Facility Integration Data

The table below provides fleet-level consumption estimates for facilities operating multiple Harvest Right Pro freeze dryer units, based on standard batch-processing cycles and a 50-count pack format.

Operator Field Notes

• Pre-load inspection: Verify pouch interior is free of particulate contamination before loading freeze-dried product; mylar interiors can accumulate static charge that attracts fine powder during high-volume batch runs.
• Reseal engagement: After initial fill, press the resealable closure strip from one end to the other in a single continuous motion to ensure full-width engagement — partial closure leaves a moisture ingress channel that is not visible to the eye.
• Heat-seal protocol: For permanent closure applications, position the impulse sealer bar at least 0.5" above the resealable strip to avoid deforming the closure mechanism and compromising future reseal performance on partially used pouches.
• Oxygen absorber timing: If using oxygen absorbers in conjunction with these pouches, insert the absorber immediately before final closure — absorbers begin activating on contact with ambient air and lose rated capacity if left open during slow-fill operations.
• Batch labeling: Apply batch identification labels to the exterior face before loading product; labeling a filled pouch risks pressure deformation of freeze-dried product against the interior wall.
• Storage orientation: Store sealed pouches upright in a vertical rack or bin to prevent the resealable closure from bearing the weight of the product contents, which can cause gradual closure fatigue over extended storage periods.

Shipping & Logistics

• Shipping Jurisdiction: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders outside this region will not be fulfilled.
• Lead Time: In-stock orders typically ship within 1–3 business days. Lead times for volume or fleet-scale consumable orders may vary — contact us before placing large orders to confirm availability and estimated ship dates.
• Returns: Unopened, undamaged packs in original packaging are eligible for return within the return window specified in our Return Policy. Opened consumable packs are not eligible for return due to the nature of the product.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Questions before ordering? Contact Cannafull Spectrum Solutions at cannafullspec.com — our team supports licensed U.S. facilities with consumable sourcing, fleet-scale supply planning, and post-harvest workflow integration.

What's in the Box

• 6x9.75 Resealable Mylar Pouches — 50 count

Contents confirmed from manufacturer source data. Oxygen absorbers, impulse sealer, and vacuum pump accessories are not included in this consumable pack. These items are available separately or as part of Harvest Right Pro freeze dryer bundles. Verify pack contents upon receipt and report any discrepancy to Cannafull Spectrum Solutions before opening or using the product.

Regional Compliance & Deployment Notes

• U.S. Deployment Only: This product is sold and shipped exclusively within the contiguous 48 United States through Cannafull Spectrum Solutions. No Canadian, international, or territory fulfillment is available through this storefront.
• Facility Compliance: Operators are responsible for ensuring that packaging materials used in their post-harvest workflows comply with applicable state and local regulations governing the storage and distribution of processed botanical and agricultural products. Cannafull Spectrum Solutions does not provide regulatory compliance guidance.
• Food-Contact Compliance: Confirm that the mylar pouch material meets any applicable food-contact or product-contact material standards required by your facility's operating license or state regulatory framework before integrating into a licensed production line.
• Consumable Classification: This product is a packaging consumable, not a regulated device or controlled substance. No special licensing is required to purchase or possess this product in the contiguous United States.
• Authorized Dealer Status: Cannafull Spectrum Solutions is a factory-authorized dealer for Harvest Right products. All units sold through this storefront are genuine Harvest Right consumables sourced through authorized distribution channels.

Compliance requirements vary by state, license type, and facility classification. The information provided on this page is for operational reference only and does not constitute legal, regulatory, or compliance advice. Operators should consult their state regulatory authority and facility compliance officer before integrating new packaging materials into a licensed production workflow. Cannafull Spectrum Solutions assumes no liability for regulatory non-compliance arising from the use of this product outside its intended application parameters.