AC Infinity CLOUDLAB 816 | 高级种植帐篷 10x5 | 2000D 钻石聚酯薄膜帆布 | 120 英寸 x 60 英寸 x 80 英寸

Precision Control in Any Space

Every uncontrolled variable inside a grow enclosure is a compounding liability. Thin-walled tents flex under equipment load, creating micro-gaps that bleed light and destabilize photoperiod integrity. Undersized poles deflect under the combined weight of lighting, filtration, and climate hardware — not catastrophically, but enough to shift mounting angles, alter airflow patterns, and introduce the kind of low-grade inconsistency that erodes output cycle after cycle. Poorly sealed zipper systems and inadequate canvas density allow ambient light intrusion that disrupts dark periods without triggering any visible alarm. The operator adjusts inputs, chases symptoms, and never isolates the structural enclosure as the source of variance. The equipment is not failing loudly — it is failing quietly, every run.

After deployment, the enclosure becomes a non-variable. The atmospheric boundary holds. Photoperiod integrity is maintained by a 100% external lightproof design with front zipper flaps as a secondary light-leak barrier. Climate hardware mounts to a dedicated steel controller plate with a lightproof cable passthrough — no improvised cord routing, no penetration gaps. Humidifiers, heaters, and A/C units connect through additional cinched duct ports without compromising the sealed perimeter. The operator stops managing the enclosure and starts managing the crop.

The mechanism behind that stability is structural specification. The CLOUDLAB 816 is constructed from 2000D Oxford canvas on the exterior with a diamond-patterned Mylar interior, lab-tested via Agilent UV-Vis-NIR Spectrophotometer for maximum light reflectivity. The frame uses 22mm steel poles — measurably thicker than the 18mm standard found in most competing enclosures — with a beam weight capacity of 250 lbs and a total system load capacity of 300 lbs (fans and lights combined). The 118.11" x 59.05" x 78.74" interior accommodates 12 plants in 5-gallon containers across a 300.0 x 150.0 x 200.0 cm footprint, with 4 primary hanging bars plus 4 extra, 6 x 4-inch duct openings, 2 x 8-inch duct openings, and 4 x 10-inch duct openings for full HVAC integration. In practical terms, the CLOUDLAB 816 delivers a sealed, lightproof 10x5 atmospheric enclosure with a 250 lb beam capacity and 300 lb total system load across a 118.11" x 59.05" x 78.74" footprint at MAP pricing of $449.

Where This Belongs (and Doesn't)

Electrical and HVAC integration must be performed in accordance with applicable local codes. Duct port sizing and controller wiring should be verified against the connected equipment's rated specifications before deployment. Cannafull Spectrum Solutions does not provide electrical or mechanical installation services.

How It Works

The CLOUDLAB 816's performance architecture begins at the structural layer. The 22mm steel pole system — reinforced at every corner junction — carries a beam weight capacity of 250 lbs, with the total system load rated at 300 lbs when fans, lighting, and ancillary hardware are combined. This is not a marginal upgrade over the 18mm standard; it is a 22% increase in pole cross-section that directly reduces deflection under sustained load. The frame connects through thick steel tube connectors, and reinforced tent corners distribute stress away from the canvas attachment points, preventing the corner-tear failure mode common in lighter-gauge enclosures.

The atmospheric seal is maintained through three independent systems. First, the 2000D Oxford outer canvas provides the primary structural and light-blocking barrier — 2000D density represents a thread count specification that directly correlates to puncture resistance and long-term dimensional stability. Second, the 500G light-proof layer and front zipper flaps provide a secondary barrier against ambient light intrusion at the highest-risk penetration point: the access door. Third, SBS-rated zippers deliver smooth, jam-free operation that preserves the seal integrity at every access cycle without the zipper-track deformation that degrades lighter zipper systems over time.

Interior photon management is handled by the diamond-patterned Mylar lining, which has been lab-tested using an Agilent UV-Vis-NIR Spectrophotometer to verify maximum light reflectivity performance. The diamond pattern geometry distributes reflected photons more uniformly across the canopy plane than flat-surface Mylar, reducing hot-spot concentration and improving canopy-level light uniformity without any additional hardware. The controller mounting plate — a steel-fabricated panel with a lightproof cable passthrough — provides a fixed, sealed integration point for AC Infinity and compatible environmental controllers, eliminating improvised cord routing that creates light-leak vectors. Duct port inventory includes 6 x 4-inch, 2 x 8-inch, and 4 x 10-inch openings, with rear intake holes at 5.90 x 13.77 inches (15.0 x 35.0 cm) and side intake holes at 5.90 x 13.77 inches (15.0 x 35.0 cm), providing full routing flexibility for inline fans, carbon filters, humidifiers, heaters, and A/C units. The observation window measures 13.77 x 39.37 inches (35.0 x 100.0 cm), providing a full canopy sightline without requiring door access. In practical terms, the CLOUDLAB 816 delivers a 300 lb-rated sealed enclosure with diamond Mylar reflectivity, 22mm steel structural framing, and 12-port HVAC access across a 118.11" x 59.05" x 78.74" atmospheric footprint.

Commercial Assurance

Cannafull Spectrum Solutions is a factory-authorized dealer for AC Infinity. Every CLOUDLAB 816 unit sold through this listing is a genuine AC Infinity product (SKU: AC-CBA816, UPC: 819137021884) sourced through authorized distribution channels.

• Manufacturer: AC Infinity Inc.
• Authorized Dealer Status: Factory-authorized — full manufacturer support chain intact
• Warranty: Warranty terms are governed by AC Infinity's current manufacturer warranty policy. Contact Cannafull Spectrum Solutions or AC Infinity directly to confirm applicable coverage before purchase.
• MAP Compliance: This unit is listed at MAP pricing of $449 in compliance with AC Infinity's authorized dealer agreement.
• Support: Pre-sale technical questions and post-sale support available through Cannafull Spectrum Solutions. Contact details in the Shipping & Logistics section below.

System Integration

• Controller Ecosystem: The integrated steel controller mounting plate with lightproof cable passthrough is designed for AC Infinity UIS-compatible controllers, enabling automated atmospheric scheduling without external mounting hardware or cable penetration gaps.
• HVAC Routing: Twelve duct ports (6 x 4-inch, 2 x 8-inch, 4 x 10-inch) plus rear and side intake holes (5.90 x 13.77 inches each) support inline fan arrays, carbon filtration, supplemental humidification, heating, and active cooling in a single enclosure without port conflicts.
• Lighting Infrastructure: Four primary hanging bars plus four additional bars, rated to 250 lbs beam capacity, accommodate multi-fixture lighting arrays, trellis systems, and ancillary canopy management hardware simultaneously.
• Containment: The heavy-duty catch tray and waterproof floor lining provide spill and runoff containment, reducing facility floor exposure to irrigation overflow during automated watering cycles.
• Observation Protocol: The 13.77 x 39.37 inch (35.0 x 100.0 cm) viewing window enables canopy inspection and equipment status monitoring without breaking the atmospheric seal or interrupting photoperiod schedules.

Facility Integration Data

The following ROI reference data is provided to assist procurement decisions at multi-unit deployment scale. All figures use MAP pricing of $449 per unit and are provided for budgetary estimation only — actual facility costs will vary based on ancillary equipment, installation, and operational overhead.

Fleet pricing inquiries for 10+ units: contact Cannafull Spectrum Solutions directly via cannafullspec.com.

Operator Field Notes

• Pole gauge matters at load: The 22mm steel poles carry a 250 lb beam rating. Operators running dual-fixture lighting arrays plus inline fan hardware should calculate combined suspension weight before finalizing mounting configurations — the 300 lb total system load ceiling includes all suspended and resting equipment.
• Zipper longevity protocol: SBS-rated zippers maintain seal integrity under repeated cycling, but operators should avoid forcing the zipper track when canvas is under tension from internal pressure differentials. Equalize pressure before opening during active negative-pressure ventilation cycles.
• Controller plate integration: The lightproof cable passthrough on the controller mounting plate is sized for AC Infinity UIS controller cabling. Third-party controller cables with non-standard connector profiles may require adapter sleeves to maintain the lightproof seal at the passthrough point.
• Duct port selection: The 10-inch ports are positioned for primary inline fan and carbon filter connections. The 4-inch ports are suited for supplemental humidity and temperature control equipment. Map your HVAC routing plan against the port inventory (6 x 4-inch, 2 x 8-inch, 4 x 10-inch) before equipment procurement to avoid port conflicts.
• Floor tray containment: The heavy-duty catch tray is designed for incidental overflow, not sustained irrigation runoff. Operations using automated drip or flood-and-drain systems should verify tray capacity against their irrigation volume per cycle and supplement with external containment if required.
• Canvas inspection cadence: The 2000D Oxford outer layer is rated for long-term structural stability, but operators should inspect seam integrity and zipper-flap alignment at the start of each new production cycle to confirm the lightproof boundary has not been compromised by equipment contact or repositioning.

Operator FAQ

Shipping & Logistics

• Shipping Jurisdiction: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders from Alaska, Hawaii, U.S. territories, or international addresses cannot be fulfilled through this listing.
• Fulfillment: Orders are processed and shipped via standard freight or ground carrier depending on package dimensions. Estimated transit times will be provided at checkout. Cannafull Spectrum Solutions is not responsible for carrier delays after the shipment has been tendered to the carrier.
• Returns: Returns of defective units are handled in accordance with AC Infinity's manufacturer warranty policy and Cannafull Spectrum Solutions' return procedures. Non-defective returns must be initiated within the return window specified at cannafullspec.com/pages/return-policy. Units must be returned in original, unassembled condition with all original packaging intact.
• Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering.

Pre-sale and post-sale support: cannafullspec.com | Contact form available at cannafullspec.com/pages/contact

What's in the Box

The following items are confirmed as included with the CLOUDLAB 816 (SKU: AC-CBA816) based on manufacturer source data:

• CLOUDLAB 816 grow tent canvas assembly (2000D Oxford outer / diamond Mylar inner)
• 22mm steel pole and connector frame system
• 4 primary hanging bars + 4 extra hanging bars (8 total)
• Heavy-duty catch tray (floor containment)
• Integrated controller mounting plate with lightproof cable passthrough
• Detachable tool bag
• Assembly instructions

Note: Box contents are based on manufacturer documentation available at time of listing. AC Infinity may update included accessories without prior notice. If your shipment is missing any listed component, contact Cannafull Spectrum Solutions immediately at cannafullspec.com/pages/contact. Accessory products such as Mounting Bars and High CFM Kits are sold separately and are not included with this unit.

Regional Compliance & Deployment Notes

• Jurisdiction: The CLOUDLAB 816 is sold and shipped exclusively within the contiguous 48 United States. Buyers are solely responsible for verifying that the purchase, possession, and use of this product complies with all applicable federal, state, and local regulations in their jurisdiction.
• Electrical Compliance: Integration of fans, lighting, controllers, and climate hardware with this enclosure must comply with applicable NEC (National Electrical Code) requirements and local building codes. Cannafull Spectrum Solutions does not provide electrical installation services or compliance certifications.
• Cultivation Regulations: Indoor cultivation operations must be conducted in compliance with all applicable state and local licensing, zoning, and regulatory requirements. This product is a general-purpose indoor enclosure; its sale does not constitute endorsement or facilitation of any specific cultivation activity.
• No Canadian Distribution: This product is not available for shipment to Canadian provinces or territories. No CSA certification or Health Canada compliance documentation is provided or implied.
• Facility Suitability: Operators are responsible for confirming that the installation environment — including floor load capacity, ceiling clearance, ventilation infrastructure, and electrical service — is adequate to support the CLOUDLAB 816 and all connected equipment at rated operating loads.